LCA2331-W Outdoor Wall Light
Product Information
The product is an outdoor light that operates on 120VAC power
supply. The installation of the product requires adherence to local
and National Electrical Code (N.E.C.) standards to ensure safety.
The package includes a mounting plate, fixture body, sensor, bulb
(not included), rubber washers, mounting screw, plastic wire
connector, and fixture screw.
Product Usage Instructions
Before installing or servicing the fixture, turn off the main
power at the circuit breaker to prevent electric shock. Follow the
instructions carefully for a safe and proper installation:
- Unpack all fixture parts and hardware and lay them on a clean
workspace. - Attach the mounting plate to the outlet box using the mounting
screws. - Pull out the 3 wire power cords from the outlet box and go
through the mounting plate. - Inspect the fixture’s wires and connect the white supply wire
to the white fixture wire, connect the black supply wire to the
black fixture wire, and connect the ground supply wire to the
ground fixture wire. - Tuck the wire connections neatly into the outlet box.
- Install the Fixture Body over the mounting plate and secure it
with the two Fixture Screws through the Rubber Washers until
tightened. - Apply silicone sealer at the connection between the wall and
the lamp body wall seat. - Install a light bulb (not included).
- Restore power to junction box and test the fixture.
- The installation is complete.
Note: If you are unfamiliar with proper electrical wiring
connections, obtain the services of a qualified electrician to
ensure safety. The product comes with a timer switch with two
options: 2 minutes or 6 minutes.
INSTALLATION INSTRUCTIONS
OUTDOOR LIGHT
120VAC
READ AND FILLOW SAFETY INFORMATION
Turn off the main power at the circuit breaker before installing and servicing the fixture to prevent possible injury from electric shock.
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.
INSTALLATION & ASSEMBLEY Remove the fixture and the mounng package from the box and make sure that no parts are missing by referencing the illustraons on the installaon instrucons.
1. Carefully unpack all fixture parts and hardware and lay them on a clean workspace.
2. Aach the Mounng Plate to the Outlet Box by using the Mounng Screws.
3. Pull out the 3 wire power cords from the outlet box and go through the Mounng Plate.
4. Carefully inspect the fixture’s wires and connect the white supply wire to the white fixture wire, Connect the black supply wire to the black fixture wire and connect the ground supply wire to the ground fixture wire.
5. Gently tuck the wire connecons neatly into the outlet box.
6. Install the Fixture Body over the mounng plate and Secure it with the two Fixture Screws through the Rubber Washers unl ghten.
8. The Silicone Sealer is closed with at the connecon between the wall and the lamp body wall seat
9. Install the light bulb.
10. Restore power to juncon box and test fixture.
11. Installaon is complete.
Outlet Box(No Included)
Rubber Washers*2pcs
Mounting Plate
Fixture Body
Plastic Wire Connector * 3pcs
Fixture Screw * 2pcs
Mounting Screw * 2pcs
Sensor
Bulb(No Included)
Timer Switch Commutateur de minuterie Interruptor del temporizador
Sensitivity Switch Commutateur de sensibilité Interruptor de sensibilidad
2 MINUTES or 6 MINUTES
· Wipe clean with a soft dry cloth or electrostatic cloth. Always avoid using harsh chemicals and abrasives to clean clamps as they may damage the surface. · Nettoyer avec un chiffon doux et sec ou un chiffon électrostatique. Évitez toujours d’utiliser des produits chimiques agressifs et des abrasifs pour nettoyer les pinces car ils peuvent endommager la surface. · Limpiar con un paño seco suave o un paño electrostático. Siempre evite el uso de productos químicos agresivos y abrasivos para limpiar la abrazadera, ya que pueden dañar la superficie.
