MV4-2UCRDA Undercounter Freezers and Refrigerators
Product Information
The product is a freezer that should be used with caution to
avoid fire, electric shock, or injury. It is important to read all
instructions and follow basic safety precautions before using the
unit. The product should not be modified, and if the plug provided
with the unit does not fit the outlet, a qualified electrician
should install a proper outlet. The user should position the
equipment in a way that it is easy to disconnect from the power
supply. The user should not attempt to repair or replace any part
of the freezer for servicing while under warranty without first
contacting the So-Low Service Department. The model, serial number,
and box identification number can be found on the serial tag,
located on the interior left upper wall or back of the unit.
Product Usage Instructions
Pre-Installation Information
Before installing the product, read all instructions and follow
basic safety precautions. Moisture during the summer season can
affect the product, so it is important to monitor it during this
time.
Door Gasket Replacement
If the door gasket needs replacement, contact the So-Low Service
Department.
Monitor Probe for Field Installation
If a monitor probe needs field installation, contact the So-Low
Service Department.
Cleaning and Defrost Procedure
It is important to clean and defrost the product regularly to
ensure proper functioning. Read the instructions provided in the
manual for cleaning and defrosting.
Cleaning the Condenser
It is important to clean the condenser regularly to ensure
proper functioning. Read the instructions provided in the manual
for cleaning the condenser.
Control Programming
Read the instructions provided in the manual for control
programming.
How to Calibrate the Control
Read the instructions provided in the manual for calibrating the
control.
Control Settings
The product has basic and advanced control settings. Read the
instructions provided in the manual for both basic and advanced
control settings.
The product has a hidden menu that can be accessed by following
the instructions provided in the manual.
Product Specifications
- Model Numbers: MV4-2UCRDA, MV4-2UCRGDDA, MV4-6UCRDA,
MV4-6UCRGDDA, MV20-2UCF, MV25-4UCF, MV30-4UCF, MV40-4UCF,
DHK4-10GD, DHK4-10SD, DHK30-10SD, DHK20-20MDP, DH-9RFDA - Supply Voltage: 115 Volts
- Frequency: 60 Hertz
- Phase: 1
- Supply Voltage Variation: Should not vary more than 5% from
serial plate ratings - Amp: 15
- Dedicated Line: Yes
- NEMA: 5-15
- Cord and Plug Set: Included
- GFI/GFCI Outlet: Do not connect to GFI/GFCI outlets as it can
result in product loss due to unsafe cabinet temperature when GFI
device trips from moisture. - Extension Cords: Do not use extension cords.
- Electrical Plug: Do not disable or bypass ground prong on
electrical plug.
To reduce the risk of fire, electric shock or injury to persons using this freezer, read all instructions and follow basic safety precautions before using the unit, including the following:
Do not modify the plug provided with the unit. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.
Do not position equipment so it is difficult to disconnect from the power supply.
While under warranty, do not attempt to repair or replace any part of the freezer for servicing without first contacting the So-Low Service Department.
BEFORE CALLING THE MANUFACTURER’S TECHNICAL SUPPORT DEPARTMENT Please have the model number of the unit, box identification number, and serial number ready as well as the problem description. The model, serial number and box id number can be found on the serial tag, which is located on the interior left upper wall, or back of the unit.
SAVE THESE INSTRUCTIONS
PRE-INSTALLATION INFORMATION…………………………………………
MOISTURE DURING THE SUMMER SEASON…………………………….
DOOR GASKET REPLACEMENT…………………………………………….. MONITOR PROBE FOR FIELD INSTALLATION…………………………….
CLEANING AND DEFROST PROCEDURE……………………………….. CLEANING THE CONDENSER……………………………………………..
CONTROL PROGRAMMING…………………………………………………. HOW TO CALIBRATE THE CONTROL……………………………………….
CONTROL SETTINGS
BASIC CONTROL SETTINGS……………………………………………….. ADVANCED SETTINGS…………………………………………………………
THE HIDDEN MENU……………………………………………………………
MV4-2UCRDA MV4-2UCRGDDA MV4-6UCRDA MV4-6UCRGDDA MV20-2UCF MV25-4UCF MV30-4UCF MV40-4UCF DHK4-10GD DHK4-10SD DHK30-10SD DHK20-20MDP DH-9RFDA
115 VOLTS 60 HERTZ 1 PHASE
(SUPPLY VOLTAGE SHOULD NOT VARY
MORE THAN 5% FROM SERIAL PLATE
RATINGS.)
15 AMP
DEDICATED LINE
NEMA 5-15
(Unit prewired at factory includes cord and plug set.)
· · · · · ·
°
CAUTION
DO NOT CONNECT TO GFI / GFCI OUTLETS. CONNECTION TO THAT TYPE OF OUTLET CAN RESULT IN PRODUCT LOSS DUE TO UNSAFE CABINET TEMPERATURE WHEN GFI DEVICE TRIPS FROM MOISTURE. DO NOT USE EXTENSION CORDS AND DO NOT DISABLE OR BY-PASS GROUND PRONG ON ELECTRICAL PLUG
ELECTRICAL PLUG
· PLUG THE UNIT INTO THE PROPER OUTLET WITH AN ADEQUATE POWER SUPPLY. · THIS UNIT REQUIRES A DEDICATED ELECTRICAL LINE. · UNIT PRE-WIRED AT FACTORY AND INCLUDE CORD AND PLUG SET.
CAUTION
DISCONNECT THIS UNIT FROM THE POWER SUPPLY BEFORE PERFORMING MAINTENANCE ON THE UNIT.
· ·
LED
MODE
FUNCTION
MESSAGE CAUSE
· · ·
· ·
· · · · · ·
o o ·
· · · ·
· · ·
·
· · ·
·
·
· · ·
·
