HG-ZYLGJ Pendant Light Brass Cage Chandelier
Product Information
The product is an assembly that comes with detailed instructions
for proper setup and usage. It is designed to provide convenience
and functionality to users.
Product Usage Instructions
1. Carefully unpack all the components from the packaging.
2. Lay out all the parts on a flat, clean surface.
3. Refer to the assembly diagram provided in the user manual to
identify each component.
4. Begin by connecting the larger pieces together, following the
indicated markings or connectors.
5. Use the provided tools or hardware to secure the connections,
ensuring a tight fit.
6. Proceed to attach the smaller components, such as knobs or
buttons, according to the user manual instructions.
7. Double-check all connections and ensure they are secure and
stable.
8. Once assembly is complete, test each function or feature of
the product to ensure proper functionality.
9. If any issues or difficulties arise during assembly or usage,
refer to the troubleshooting section of the user manual or contact
customer support for assistance.
Following these instructions will help you assemble and use the
product correctly, ensuring a satisfactory user experience.
Instructions Assembly
1. To ensure accurate installation, first measure the distance between the two points of the grid with a ruler. 2. Position with a spirit level and mark on the wall with a pencil. 3. Compare the size measured in the first step, find the correct point on the wall, and mark the punching position. 4. Use an impact drill to make holes in the marked place, pay attention to use a No. 6 drill bit. 5. Use a hammer to knock the plastic expansion tube into the punched hole. 6. Use a screwdriver to screw the screw to the expansion tube. 7. Leave the screw head about 5mm(0.19 in.) for hanging the product. 8. After hanging the grid, gently pull the small end to fix the grid, and the installation is complete.
As shown below
