WICF03-1 Ceiling Fan with Light
Product Information
The product is a ceiling fan with a light kit. It comes with a
remote control for controlling the light and fan functions. The
light kit can be fixed to the fan using screws, and the light cover
can be rotated until fixed. The power cord of the light kit needs
to be connected to the light kit receiver. The remote control has
options for controlling the light and fan functions, with options
for choosing the color temperature of the light, operating the fan
at different speeds, setting a timer for automatic shut-off, and
controlling the direction of the fan. The installation process
involves fixing the mounting plate to the ceiling, attaching the
downrod and fan blades to the motor, and connecting the wires of
the fan and receiver.
Product Usage Instructions
1. Fix the mounting plate to the ceiling using machine screws
for concrete ceiling or wood screws for wooden ceiling.
2. Remove the fixing screws for the light kit and loosen the
screws of the coupler.
3. Remove the fixing screws for the fan blades.
4. Pull out the R-pin from the rod.
5. Put the wires and two canopies through the downrod.
6. Insert the cross pin and fix it with R-pin.
7. Connect the same color wires of the fan and receiver.
8. Connect the receiver to home wires. White for neutral wire,
black for live wire, green for ground wire.
9. Tighten the screws of the coupler and cover it with down
canopy.
10. Loosen two opposite screws and hang the fan on the hanging
bracket, aligning the slot on the downrod with the bulge on the
hanging bracket.
11. Align the hole between blade and holder, and attach the
blade holder bracket with screws and washers.
12. Install the blades and tighten the screws.
13. Fix the light kit with screws and connect the power cord to
the light kit receiver.
14. Rotate the light cover until fixed.
15. Use the remote control to operate the light and fan
functions. Press the ON/OFF button continuously to change the color
temperature. To turn on the light with the same color temperature
as last time, turn it back on more than 7 seconds after turning it
off. If the remote control does not work, press and hold the middle
and low buttons at the same time within 5 seconds after the product
is powered on until you hear two beeps to succeed.
Step 18
Fix the light kit with the screws.
Step 20
Rotate the light cover until fixed.
Step 19
Connect the light kit power cord to the light kit receiver.
LIGHT CONTROL
MED LOW LIGHT HI
ON/OFF
STOP
2H
1H
4H
8H
FAN CONTROL TIME SWITCH
NOTE
1. PRESS THE ON/OFF BUTTON CONTINUOUSLY TO CHANGE THE COLOR TEMPERATURE . TURN BACK ON THE LIGHT MORE THAN 7 SECONDS AFTER TURN OFF THE LIGHT , THE COLOR TEMPERATURE WILL BE THE SAME AS LAST TIME.
2. IF THE REMOTE CONTROL CANNOT BE USED NORMALLY, PLEASE PRESS AND HOLD THE MIDDLE AND LOW BUTTONS AT THE SAME TIME WITHIN 5 SECONDS AFTER THE PRODUCT IS POWERED ON, UNTIL YOU HEAR TWO BEEPS TO SUCCEED.IF IT DOESNT WORK. PLEASE TRY AGAIN.
CEILING FAN INSTALLATION tommy@war miplanet.com.cn
æ Motor
ç Hanging Bracket
è Up Canopy
PS
BI G Step 1 For concrete ceiling,install the mounting
plate to octagon box with two machine screws.
CH G Step 1 For wooden ceiling,install the mounting
plate to wooden ceiling with two wood screws.
é Blades
ê Down Rod
ë Down Rod 2
Step 2
Remove the 4 fixing screws for the light kit.
ì Blade Holder Brackets
í Blades Holders
î Down Canopy
ï Light cover
B×2 C×4 D ×16 E×5 F
×6 ×4 ×2
G HI
J
Hardware fitting
Remote Control
Step 4
Loosen the 2 screws of the coupler.
Step 3
Remove the 8 fixing screws for the fan blades.
Step 5
Pull out the R-pin from the rod.
Step 6
Put the wires and the two canopies through the downrod
Step 7
Insert the cross pin and fix it with R-pin.
E
Step 12
Connect the same color wires of the fan and receiver.
E
Step 13
Connect the receiver to home wires. White for neutral wire,
Black for Live wire, Green for ground wire.
Step 8
Tighten the 2 screws of the coupler.
Step 10
Loosen the two opposite screws
Step 9
Cover the coupler with down canopy.
æ
ç
Step 14
æRotate the up canopy. çTighten the two screws.
Step 15
Align the hole between blade and holder
bulge
slot
Step 11
Hang the fan on the hanging bracket and align the slot on the downrod with the bulge on the hanging bracket.
Step 16
The other side,fix the blade holder bracket with screws and washers.
Step 17
Install the bladestighten the screws.
