CS01 Portable Outdoor Camping Shower Set
Product Information – Portable Outdoor Camping Shower Set
CS01
| Component | Description |
|---|---|
| Pump | A device used to pump water for the shower |
| Water inlet | An opening to allow water to enter the shower system |
| Lighting | Provides illumination during showering |
| Power output | An output port to connect and power other devices |
| Battery | A rechargeable battery that powers the shower system |
| Switch | A button used to turn on/off the pump and lights |
| Charge port | A port to connect the charging cable for battery recharging |
| Power cable | A cable used to connect the shower system to a power source |
| Connector | A component used to connect different parts of the shower system |
| Water pipe | A pipe used to transport water from the source to the shower head |
| Holder&Hook | A device to hold and hang the shower system during use |
| Shower head | The component that releases water for showering |
Product Usage Instructions
- Before using the Portable Outdoor Camping Shower Set CS01,
please make sure you have received all the accessories mentioned in
the manual. If any accessories are missing, contact the sales. - Operating and Charging:
- To turn on the pump, press the button once for the L stall (low
speed), press again for the H stall (high speed), and press once
more to turn off the pump. - To turn on/off the lights, press and hold the button for 3
seconds. - For charging, insert the charging cable with a DC 5V output
voltage into the battery charge port. The battery indicator light
will flash red, indicating that charging has started. - Only charge the device with a 5V adapter. Do not use an adapter
with a higher voltage.
- To turn on the pump, press the button once for the L stall (low
- Specification:
- Discharge protection current: 5A (MAX)
- Low voltage alarm: 6.2-6.4V
- Working Voltage: 7.4V
- Working current: 4A
- Battery indicator Light: Blue light when working, red light
when the battery is low or charging - Charging time: 2-4 hours
- Charging Mode: DC 5V USB
- Charging current: 1-2A
- Charging input voltage: 4.5V-5.5V
- Working time: about 80 minutes
- Battery capacity: 2200mAh
- Water pipe length: 1.8M
- Pump size: diameter 45mm
- Assembly Steps:
- Follow the provided instructions to assemble the different
components of the shower system.
- Follow the provided instructions to assemble the different
- Note:
- Store the product in a cool, dry place when not in use.
- For long-time non-use, it is recommended to fully charge the
battery once a month.
Instruction Manual
Portable Outdoor Camping Shower Set CS01
Thank you for purchasing our product.You have chosen a high quality product designed with the latest technology. In order to use our products better.Please read the instruction manual carefully. Please check whether these accessories have been received, if any accessories are missing, please contact the sales.
1 Pump 5 Lighting
2 Water inlet 6 Power output
9 Connector 10 Water pipe
3 Battery
4 Switch
7 Charge port 8 Power cable
11 Holder&Hook 12 Shower head
OPERATING AND CHARGING One-button switch control,press the button to turn on the pump L stall,press again the button to turn on the pump H stall.then press to turn off the pump. Press and hold the button for 3 seconds to turn on/off the lights. Insert the charging cable with the output voltage of DC 5V into the battery charge port, the battery indicator light flashes red, the charging starts.
Only Charge This Device With A 5V Adopter.Do Not Charge It With An Adapter That’s More Than 5 Volts.
SPECIFICATION Discharge protection current:5A(MAX) Low voltage alarm:6.2-6.4V Working Voltage:7.4V Working current: 4A Battery indicator Light:blue light when working,red light when the battery is low or charging. Charging time:2-4hours Charging Mode:DC 5V USB Charging current:1-2A Charging input voltage:4.5V-5.5V Working time:about 80 minutes Battery capacity:2200mAh Water pipe:1.8M Pump size:diameter 45mm ASSEMBLY STEPS
Note!
. Store the product in a cool, dry place when not in use. . For long-time non-use, it’s recommend to fully charge once a month.
Vielen Dank für den Kauf unseres Produkts. Sie haben sich für ein High entschieden qualitätsprodukt, das mit der neuesten technologie entwickelt wurde. Um unsere Produkte besser nutzen zu können, lesen Sie bitte die Bedienungsanleitung sorgfältig durch. Bitte prüfen Sie, ob Sie dieses Zubehör erhalten haben, ggf Sollte Zubehör fehlen, wenden Sie sich bitte an den Vertrieb.
1 Pumpe
2 Wasserzulauf
5 Beleuchtung 6 Leistung
9 Verbinder 10 Wasserrohr
3 Batterie
4 Schalten
7 Ladeanschluss 8 Stromkabel
11 Halter & Haken 12 Duschkopf
BETRIEB UND AUFLADEN Ein-Knopf-Schaltersteuerung, drücken Sie die Taste, um die Pumpe L einzuschalten, drücken Sie die Taste erneut, um die Pumpe H einzuschalten. Drücken Sie dann, um die Pumpe auszuschalten. Halten Sie die Taste 3 Sekunden lang gedrückt, um die Beleuchtung ein -/auszuschalten. Stecken Sie das Ladekabel mit der Ausgangsspannung von DC 5 V in den Batterieladeanschluss, die Batterieanzeige blinkt rot, der Ladevorgang beginnt.
Only Charge This Device With A 5V Adopter.Do Not Charge It With An Adapter That’s More Than 5 Volts.
SPEZIFIKATION DEntladeschutzstrom: 5A (MAX) Niederspannungsalarm: 6.2-6.4 V Betriebsspannung: 7.4 V Arbeitsstrom: 4A Batterieanzeigelicht: blaues Licht beim Arbeiten, rotes Licht, wenn der Akku schwach ist oder aufgeladen wird. Ladezeit: 2-4 Stunden Lademodus: DC 5 V USB Ladestrom: 1-2A Ladeeingangsspannung: 4.5 V-5.5 V Arbeitszeit: ca. 80 Minuten Batteriekapazität: 2200 mAh Wasserleitung: 1,8 m Pumpengröße: Durchmesser 45 mm MONTAGESCHRITTE
Notiz!
. Lagern Sie das Produkt an einem kühlen, trockenen Ort. . Bei längerem Nichtgebrauch wird empfohlen, das Gerät einmal im
Monat vollständig aufzuladen.
Gracias por adquirir nuestro producto. Ha elegido un producto de alta calidad diseñado con la última tecnología. Para utilizar mejor nuestros productos, lea atentamente el manual de instrucciones. Verifique si se han recibido estos accesorios, si falta algún accesorio, comuníquese con el departamento de ventas.
1 Bomba
2 Entrada de agua 3 Batería
4 Cambiar
5 Encendiendog 6 Salida potencia 9 7 puerto carga 8 Cable energía
Conector 10 Tubería agua
11 Gancho soporte12 Alcachofa
ducha
FUNCIONAMIENTO Y CARGA Control de interruptor de un botón, presione el botón para encender el puesto L de la bomba, presione nuevamente el botón para encender el puesto H de la bomba. Luego presione para apagar la bomba. Mantenga presionado el botón durante 3 segundos para encender/ apagar las luces. Inserte el cable de carga con el voltaje de salida de DC 5V en el puerto de carga de la batería, la luz indicadora de la batería parpadea en rojo, comienza la carga.
Solo cargue este dispositivo con un adaptador de 5 V. No lo cargue con un adaptador de más de 5 voltios.
ESPECIFICACIÓN Corriente de protección de descarga: 5A (MAX) Alarma de bajo voltaje: 6.2-6.4V Voltaje de funcionamiento: 7.4 V. Corriente de trabajo: <4A Luz indicadora de batería: luz azul cuando funciona, luz roja cuando la batería está baja o cargando. Tiempo de carga: 2-4 horas Modo de carga: CC 5V USB Corriente de carga: 1-2A Voltaje de entrada de carga: 4.5 V-5.5 V Tiempo de trabajo: alrededor de 80 minutos Capacidad de la batería: 2200 mAh Tubería de agua: 1.8 M Tamaño de la bomba: diámetro 45 mm PASOS DE MONTAJE
Nota!
. Guarde el producto en un lugar fresco y seco. . Para no usar durante mucho tiempo, se recomienda cargar
completamente una vez al mes.
!
. .
