Safety Camera
Product Information
The BL-2730M is a mirror monitor that supports CVBS/AHD 720P/AHD
1080P. It comes with a 7-inch new TFT panel screen with an aspect
ratio of 10:9 image. The monitor has 2-channel video input with 2
trigger cable inputs and can auto switch between PAL and NTSC
systems. It has a resolution of 1024 x R.G.B x 600 and a brightness
of 450cd/m2. The power supply required for the monitor is 12-24V
DC. The kit includes a BL-270HM 2 Channel Mirror Monitor, a
BL-270HM-BKT Dash mount bracket, and a BL-270HM-PC 2CH Video Input,
2 x alarm trigger inputs, Power and GND.
Product Usage Instructions
- Connect the Power and GND cables to Negative12-24V to
positive. - Connect AV1 – AV2 cables to camera 1 and camera 2.
- Connect Trigger AV1 – Trigger AV2 cables to trigger the video
AV1AV2. - Use the Menu Tree to customize the view, system settings, and
default settings as per your requirements.
Note: Channel 1 video has priority over Channel 2 video if these
are triggered at the same time.
For more information, technical documents or support, please
visit https://brigade-electronics.com/product-support-area/
or contact technical support at
[email protected].
BL-2730M Manual
(Support CVBS/AHD 720P/AHD 1080P)
Please refer to https://brigade-electronics.com/product-support-area/ for more information and technical documents
Kit Contents
BL-270HM 2 Channel Mirror Monitor
BL-270HM-BKT Dash mount bracket
BL-270HM-PC 2CH Video Input, 2 x alarm trigger inputs,
Power and GND
Mirror Monitor
1. Power 2. Up 3. Menu 4. Down 5. Channel 1/ Channel 2 6. IR
Monitor Specification:
. Screen size: 7-inch new TFT panel . Aspect Ratio: 10:9 image . Input: 2-channel video input with 2 trigger cable inputs . System: PAL and NTSC auto switching . Resolution: 1024 x R.G.B x 600 . Brightness: 450cd/m2 . Power supply: 12-24V DC . Built-in speaker . Operation Temperature: -30~+70 . Storage Temperature: -40~+80.
Cable
Note: Channel 1 video has priority over Channel 2 video if these are triggered at the same time. Usual manual 1. Power connected, GND to Negative12-24V to positive 2. AV1 – AV2 connect to camera 1 and camera 2 3. Trigger AV1 – Trigger AV2 cables to trigger the video AV1AV2
BL-270HM
Menu Tree
View
Brightness0-100 Saturation0-100 Contrast0-100 Hue0-100
System
Reversing Line MODE 1(2/3) Astern Delay 3s/6s/9s LanguageEnglish/Japanese/Chinese RotateLU/RD VersionShows installed O/S/ Firmware version Resolution720P/1080P/CVBS PAL/CVBS N Audio SwitchOFF/ON Backlight ModeOFF/ON Default Setting Image Mirror
www.brigade-electronics.com
electronics.com
Brigade Electronics | Commercial Vehicle Camera Systems
Product Support Area | FAQs | Brigade Electronics
