LED s light EasyFix LED Floodlight
Installation
LED module replacement
Safety warming
- Ensure you have fully read and understood the instructions in this document before you install or use the product following the installation/wire diagram (when applicable), Keep this document for future reference and only use the product as described in this document.
- Any other use of the product than described in this manual may damage the product or cause injury to the user (eg. due to a short circuit, fire or electric shock) Disconnect the product from the power source if problems occur.
- Do not drop the product and avoid bumping. Do not use the product if a part is damaged or defective.
- Replace a damaged defective product immediately.
- When a non-standard consumer (power installation is required this should be performed by a qualified technician to reduce the risk of an electric shock.
- Make sure the product is sufficiently ventilated during use. Never cover an electrical (LED) device during usage since it can generate heat causing damage.
- Besides LED can be extremely bright and may cause serious eye damage so don’t stare at it directly.
- When a product is meant for indoor and/or outdoor use only, this will be mentioned on the product/parts or in the manual.
- Keep the product out of reach of children or animals.
Cleaning and Maintenance warning
- Do not use cleaning solvents or abrasives.
- Do not clean the inside of the device.
- Do not attempt to repair the device when the device does not operate correctly, replace it.
- Clean the outside of the device using a soft, damp cloth (don’t use microfiber cloth)
Support:
If you need further help or have comments or suggestions please visit www.shada.nl/nlcontact
