Savoy House 7-1774-6-320 Ashburn 6-light Warm Brass And Rope Statement Pendant Light Instruction Manual

7-1774-6-320 Ashburn 6-Light Warm Brass and Rope Statement Pendant Light

Product Information

The product is a light fixture with the item number
7-1774-6-320. It consists of several parts including the fixture
body (A), center rods (B and C), loop (D), canopy (E), and quick
link (F). The fixture is designed to be connected to a power source
and accepts bulbs for illumination.

Product Usage Instructions

1. Unpack and identify all parts using the illustration for
   reference.
2. Turn off power to the installation point.
3. Unravel the supply power and ground wires and pass them through
   the center holes of center rods (B), (C), loop (D), and canopy
   (E).
4. Thread the bottom of center rod (B) into the fixture body (A).
   Repeat for remaining center rods (B) and (C). Hand tighten until
   snug.
5. Install the loop (D) into the top of center rod (C).
6. Use quick link (F) to connect the top loop (D) to the loop on
   the canopy (E) and twist the locking mechanism to secure.
7. Refer to additional installation instructions for wiring and
   installation.
8. Install bulbs into each socket according to the markings and/or
   labels on the fixture for maximum wattage.
9. Restore power to the installation point.

Note: This sheet should be retained for future reference.

ITEM NO: 7-1774-6-320
CANOPY(E) QUICK LINK(F)
LOOP(D) CENTER ROD(C)
CENTER ROD(B)
FIXTURE BODY(A)
ASSEMBLY INSTRUCTIONS
1. Carefully unpack and identify all parts referring to illustration for parts identification. 2. Turn the power to the installation point OFF. 3. Unravel the supply power and ground wires and pass them through the center holes of center rods (B),
(C), loop (D) and canopy (E). 4. Thread the bottom of center rod (B) into the fixture body (A). Repeat process for remaining center
rods (B) and (C). Hand tighten until snug. 5. Install the loop (D) into the top of center rod (C). 6. Use quick link (F) to connect the top loop (D) to the loop on the canopy (E) and twist the locking
mechanism to secure. 7. Refer to the additional installation instructions included with the product for wiring and installation. 8. Install proper bulbs (not included) into each socket referring to the markings and/or labels on the
fixture for maximum wattage. 9. Restore power to the installation point and retain this sheet for future reference.