Savoy House 7-1831-1-322 Lakewood 8 Inch W 1-light Warm Brass Statement Pendant Light With Clear Glass Shade Instruction Manual

7-1831-1-322 Lakewood 8 Inch W 1-Light Warm Brass Statement Pendant Light with Clear Glass Shade

Product Information

This product is a lighting fixture that consists of the
following components:

• Nipple (3)
• Canopy (1)
• Ball Nut (2)
• Loop (5)
• Rods (4)
• Loop (6)
• Socket (7)
• Glass Shade (8)
• Cap (9)
• Socket Ring (10)

The product is designed to provide lighting in indoor
spaces.

Product Usage Instructions

1. Before starting the assembly process, ensure that the power
   supply is disconnected.
2. Begin by attaching the canopy (1) to the installation point
   using the provided screws or mounting hardware.
3. Secure the ball nut (2) onto the nipple (3) and insert it into
   the center hole of the canopy (1).
4. Attach the rods (4) to the nipple (3) by inserting them into
   the corresponding holes.
5. Connect the loop (5) to the rods (4) by sliding it onto them
   until it is securely in place.
6. Slide the loop (6) onto the rods (4) above the previous loop
   (5) to provide additional support.
7. Insert the socket (7) into the nipple (3) and secure it in
   place.
8. Gently place the glass shade (8) over the socket (7) until it
   is properly seated.
9. Finally, screw the cap (9) onto the socket ring (10) to secure
   the glass shade (8) in place.
10. Once the assembly is complete, restore power to the
    installation point.
11. Keep this sheet for future reference.

Note: It is important to follow the recommended maximum wattage
for the lighting fixture to ensure safe usage and prevent
damage.

NIPPLE(3)

ITEM NO:7-1831-1-322 7-1831-1-89
CANOPY(1) BALL NUT(2) LOOP(5)
RODS(4)

LOOP(6)

SOCKET(7)
GLASS SHADE (8)
CAP (9) SOCKET RING (10)
ASSEMBLY INSTRUCTIONS
1.Carefully unpack and identify all parts referring to illustration for parts identification. 2.Turn the power to the installation point OFF. 3.Assemble the rods (4) together using the nipple (3). Attach the ends of rods(4) to loop (5) and loop (6). 4.Install the glass shade (8) onto the socket (7). Install cap (9) and secure with socket ring (10). 5.Refer to the additional installation instructions included with the product for wiring and installation. 6.Install proper bulbs (not included) into each socket referring to the markings and/or labels on the fixture
for maximum wattage. 7.Restore power to the installation point and retain this sheet for future reference.