HS4VS Disposable Heel Straps
Product Information
The HS4VS Disposable Heel Straps are designed to provide
electrostatic discharge (ESD) protection for individuals wearing
ESD overshoes. These heel straps are constructed with high-quality
materials to ensure durability and reliability.
Features and Benefits:
- Easy to use and apply
- Pressure sensitive adhesive for secure mounting
- Provides effective grounding for ESD protection
- Disposable design for convenience
Construction:
The HS4VS Disposable Heel Straps are made of high-quality
materials that ensure optimal performance. The pressure sensitive
adhesive on one end of the strap allows for easy application and
secure mounting to the bottom of the shoe heel. The contact ribbon
of the heel grounder wraps up the back of the shoe and lays inside,
providing effective grounding.
Product Usage Instructions:
- Align the pressure sensitive end of the heel strap with the
front edge and center of the shoe heel. - Peel off the protective liner from the adhesive side of the
heel strap. - Mount the device by firmly pressing it to the bottom of the
heel, ensuring proper adhesion. - Wrap the contact ribbon of the heel grounder up the back of the
shoe and lay it inside. - Step into the shoe, ensuring that the heel strap is securely
attached. - Repeat steps 1-5 for the other shoe.
Standard:
The HS4VS Disposable Heel Straps comply with EN 61340-5-1
standard for ESD protection.
The information contained herein is based on data considered
accurate and is offered at no charge. No warranty is expressed or
implied regarding the accuracy of this data. Liability is expressly
disclaimed for any loss or injury arising out of the use of this
information or the use of the materials designated.
Technical Bulletin
Issue 1 – 30/03/23
HS4VS Disposable Heel Straps
DESCRIPTION
Black and yellow disposable heel straps, ideal for visitors or short term use. The conductive plastic wall dispenser is an ideal awareness for instructing users of the importance of heel straps as well as storage. Supplied in a pack of 100 with optional wall dispenser. Designed for plant visitors and other temporary workers who enter static controlled floor. It is made by anti-static non-woven fabrics and could provide the safe and effective resistance. Depends on conductive yarn in the anti- static fabrics to create and maintain electrical contact between ground and body and can reach the efficiency of static dissipation.
FEATURES AND BENEFITS
· Easy to use and comfortable to wear. · Application: Anywhere that is static · controlled environment. · Composition: 99% polyester + 1% · conductive yarn. · Supplied in a pack of 100. · Made by anti-static fabrics.
CONSTRUCTION
1) Align the pressure sensitive end of products with the front edge and centre of shoe heel. 2) Peel the protective liner and mount the device. Press it firmly to the bottom of the heel. 3) Wrap the contact ribbon of the heel grounder up the back shoe and lay it inside. 4) Step into the shoe. 5) Repeat steps one to four on the other shoe
STANDARD
ESD Overshoes complies with EN 61340-5-1 as standard.
The information contained herein is based on data considered accurate and is offered at no charge. No warranty is expressed or implied regarding the accuracy of this data. Liability is expressly disclaimed for any loss or injury arising out of the use of this information or the use of the materials designated.
