Horticulture Lighting Group Hlg Tomahawk Bar Lamp’s Instruction Manual

HLG Tomahawk Bar Lamp’s

Product Information

The HLG Tomahawk is a lamp designed for lighting purposes. It
comes with the following included hardware:

• Qty 1: Allen Wrench
• Qty 2: Locking screws
• Qty 4: Driver Mounting Bolts

Please note that mounting the driver on the HLG Tomahawk is not
recommended by HLG as it will void the ETL Certification of the
lamp. HLG holds no responsibility for any consequences resulting
from mounting the driver.

Product Usage Instructions

1. Unfolding and Assembly of the HLG Tomahawk:
   1. Remove the lamp from the packing box.
   2. Place the lamp face down on a level surface.
   3. Locate the PEM set locking holes on the rails of the HLG
      Tomahawk.
   4. Using the Allen Wrench, insert the two locking screws into the
      PEM sets and tighten them completely to secure the lamp in an open
      position.
2. Connecting the M16 Wiring Harness:
   1. Locate the two M16 quick connect wiring harness ends. One end
      is attached to the lamp, and the other end is attached to the
      driver.
   2. Connect the M16 ends together and tighten the screwing lock to
      secure the connection.
3. Mounting the Driver on the HLG Tomahawk:
   1. Locate the driver mounting PEM sets inside the rail of the
      Tomahawk.
   2. Using a Phillips head screwdriver (not included), insert the
      four driver mounting bolts into the PEM sets and tighten them to
      secure the driver.

The Tomahawk Driver DC Extension Cord is available for purchase
on the HLG.com website.

Please refer to the assembly instructions and follow them
carefully for proper usage and installation of the HLG
Tomahawk.

Included Hardware:
1. Qty 1: Allen Wrench 2. Qty 2: Locking screws
3. Qty 4: Driver MounAng Bolts

HLG Tomahawk
Assembly Instruc/ons

Unfolding and Assembly of the HLG Tomahawk

The HLG Tomahawk is folded within the packing box. Remove lamp and unfold it face down on a level surface

Locate the PEM set locking holes on the rails of the HLG Tomahawk.
7/7/2023

Using the Allen Wrench (1), insert the two locking screws (2) in the PEM sets. Tighten each nut completely to secure
the lamp open.
1

Locate the two M16 quick connect wiring harness ends. One is aMached to the lamp and the other is
aMached to the driver.

Connect the M16 ends together and Oghten the screwing lock to secure the connecOon.

Moun;ng the Driver on the HLG Tomahawk
*Please note: Moun.ng the driver is not recommended by HLG. This will void the ETL Cer.fica.on of the lamp. HLG holds no responsibility.

Locate the driver mounOng PEM sets inside the rail Using a Phillips head screwdriver (not included), insert the

of the Tomahawk. Align the driver channels with the four driver mounOng bolts (3) and Oghten to secure the

PEM sets.

driver.

Tomahawk Driver DC Extension Cord
Available on the HLG.com website

7/7/2023

2

References

• Horticulture Lighting Group Premium LED Grow Lights for Agriculture