SCNSP2339A Sanna Sconce
Product Information
- Product Name: SANNA SCONCE
- Manufacturer: URBAN OUTFITTERS
- Tools Required (not included): Pencil, Drill /
Screw driver - Warnings:
- Do not throw away packing materials and carton until after
assembly. - Assemble all parts on a clean smooth surface.
- Use a TYPE A 40W MAX BULB. Do not exceed specified
wattage.
- Do not throw away packing materials and carton until after
- Care Instructions:
- Avoid direct exposure to sunlight.
- Do not place over heat or air conditioning vents.
- Adjust levelers so that the furniture sits flat on uneven
floors. - Blot spills, do not rub, with a clean white cloth.
- Do not use harsh chemicals.
- Before cleaning any part, test a small spot in a hidden
area. - You may need to re-tighten all bolts after initial use.
- Parts Included:
- (A) Base
- (B) Shade
- (C) Socket ring
- (D) Mounting Bracket
- (E) Screw 0.26 DIA X 0.79 L
- (F) Wall Screw 0.30 DIA X 0.98 L
- (G) Wall Anchor 0.31 DIA X 0.98 L
Product Usage Instructions
Step 1
- Locate the desired position of the sconce on the wall. If
attaching to drywall:- Place the Mounting Bracket (D) on the wall and mark the
location of the holes in the bracket on the wall. - Remove the Mounting Bracket (D) from the wall and pre-drill
holes for the Wall anchors (G) with a drill. Then insert the
anchors. - Place the Mounting Bracket (D) back over the wall anchors and
insert the Screws (F). Tighten with a Phillips head screwdriver or
a drill.
- Place the Mounting Bracket (D) on the wall and mark the
- If drilling into a stud:
- Place the Mounting Bracket (D) on the wall and insert Screws
(F) through the bracket into the drywall. Tighten with a Phillips
head screwdriver or a drill.
- Place the Mounting Bracket (D) on the wall and insert Screws
- Locate the desired position of the sconce on the wall. If
Step 2
Place the Base (A) over the Mounting Bracket (D) as shown and
insert the Screws (E). Tighten with a Phillips head screwdriver.
Screw a Type A 40W bulb into the Base (A). Plug in the sconce to
complete assembly.
SANNA SCONCE
Assembly Instructions
TOOLS REQUIRED BUT NOT INCLUDED: Pencil, Drill / Screw driver
WARNINGS: Do not throw away packing materials and carton until after assembly. Assemble all parts on a clean smooth surface. Use a TYPE A 40W MAX BULB DO NOT EXCEED SPECIFIED WATTAGE
CARE INSTRUCTIONS: Avoid direct exposure to sunlight. Do not place over heat or air conditioning vents. Adjust levelers so that the furniture sits flat on uneven floors. Blot spills do not rub, with a clean white cloth. Do not use harsh chemicals. Before cleaning any part test a small spot in a hidden area. You may need to re-tighten all bolts after initial use.
PARTS INCLUDED:
URBAN OUTFITTERS
(Place image of part here)
(A) Base
(Place image of part here)
(B) Shade
(C) Socket ring
(D) Mounting Bracket
(E) Screw 0.26″ DIA X 0.79″ L
(F) Wall Screw 0.30″ DIA X 0.98″ L
(G) Wall Anchor 0.31″ DIA X 0.98″ L
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 1 of 3
SANNA SCONCE
Assembly Instructions
URBAN OUTFITTERS
STEP 1
A) Locate the desired position of the sconce on the wall. If attaching to drywall, Place the Mounting Bracket (D) on the wall and mark the location of the the holes in the bracket on the wall.
B) Remove the Mounting Bracket (D) from the wall and pre-drill holes for the Wall anchors (G) with a drill and then insert the anchors.
C) Place the Mounting Bracket (D) back over the wall anchors and insert the Screws (F). Tighten with a Phillips head screw driver or a drill.
D) If drilling into a stud, Place the Mounting Bracket (D) on the wall and insert Screws (F). through the bracket into the drywall. Tighten with a Phillips head screw driver or a drill.
A
C
B D
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 2 of 3
SANNA SCONCE
Assembly Instructions
URBAN OUTFITTERS
STEP 2
Place the Base (A) over the Mounting Bracket (D) as shown and insert the Screws (E). Tighten with a Phillips head screw driver. Screw a Type A 40W bulb into the Base (A). Plug in the sconce to complete assembly.
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 3 of 3
