Ascher Ultra Bright USB Rechargeable Bike Light Set
Specifications
- Color: Black, Red
- Brand: Ascher
- Material: Aluminum, Silicone, Plastic
- Power Source: Battery Powered
- Item Weight: 0.22 Kilograms
- Mounting Type: Handlebar Mount, Seat Mount
- Number of settings: 4
- Auto Part Position: Rear, Front
- International Protection Rating: IPX4
What’s in the box?
- Headlight and 1 X Taillight
- USB cables
- Mount Bracket for Headlight
- Mount Bracket for Taillight
- Instruction Manual
Description
USB-rechargeable front and rear lights with built-in lithium batteries that are 2000mAh for the headlight and 330mAh for the taillight. Depending on your preferences, the Headlight and Taillight both have a one-touch switch with four different lighting modes. Include all brightness levels, including full and dim, as well as rapid and slow flashing.
SIMPLE INSTALLATION
Headlight Installation Steps
- Fix the mount bracket on the handlebar
Buckle the strap on the hook of the mount bracket
- Press the Quick-Release clip, then slide the light onto the mount.
Buckle the strap on the hook of the mount bracket
Tail Light Installation steps
- Buckle the strap on the hook of light.
- Press the Quick-Release clip, then slide the light onto the mount.
- Attach Vertically or Horizontally the choice is yours!
Features
9.5 hours (maximum brightness), 16.7 hours (half brightness), 10 hours (slow flashing), and 11 hours (fast flashing) The accompanying micro USB cable is used to charge the Ascher bike light from your computer, a wall charger, or any other device with a USB connection.
Charge Method
- Connect a micro USB cable to the input port on the bike light.
- Connect the other end of the cable to a USB port or an AC adapter that is plugged into a power outlet.
- The LED indicators for the front and rear lights both have a red light when they are charging, and they turn green after the charge is complete.
FAQ’s
I believe the seller should immediately respond to these queries, particularly if you are describing the item as “super brilliant.” front lighting with 300 lumens. 30 to 50 rear lights are used.
Goodness, all I can say is that it sleeps very well and tires out high two blocks of distance and frequently, and I use it every day as my means of transportation to and from work and night work. Gracias
With only 300 lumens, you won’t “blind” anyone; utilizing 3000 lumens would be more dangerous. The crucial thing is that you desire those inattentive drivers—who we encounter every day—to be able to see you!
Although I’m not familiar with Planet Bike mounts, the light employs a rubber strap that can be wrapped around virtually any pole or metal tube portion. Thus probably No seat means no pole for mounting the red taillight on my R-SUB.
Press the button for two seconds to turn the light on or off.
Press the button for two seconds to change the brightness level.
Press the button for two seconds to switch between flashing modes.
To charge your light, simply connect it to any USB port. You can also use a wall adapter, car charger, or solar charger. It takes about 3 hours to fully charge your light.
The battery in your light will last up to 100 hours in flashing mode, up to 50 hours in steady mode, and up to 10 hours in high-brightness mode.
To replace the batteries, first, remove the silicone strap from around your seat post or handlebar. Then unscrew the cap at the base of your light and replace it with fresh batteries. Finally, screw on the cap and reattach your silicone strap.
Yes. It rotates as much as necessary.
One headlight and one taillight are provided. Each one has a mounting strap of its own. Use either one or both.
When I encounter bumps, it occasionally slips, but if you have it tight enough, it generally remains in place. Yes, it does not utilise batteries, but rather a USB charger.
