Crystorama Kee-a3008-bf Keenan 8 Light Forged Chandelier Instruction Manual

KEE-A3008-BF Keenan 8 Light Forged Chandelier

Product Information:

This product can expose you to Lead which is known to the state
of California to cause cancer and/or birth defects or reproductive
harm. For more information, go to www.P65Warnings.ca.gov.

Product Usage Instructions:

1. Determine the preferred hanging height and adjust the required
   rods accordingly.
2. Feed the wires through the rods and connect them together.
3. Slip the collar ring and canopy over the rod assembly.
4. Slip the mounting strap with swivel along the wire and thread
   it into the top of the rod assembly.
5. Raise the fixture up and attach the mounting plate to the
   outlet box using two outlet box screws.
6. Slip the canopy up along the rods and over the mounting plate
   with swivel, and hold it in position.
7. Slip the collar ring up to the canopy and thread it onto the
   screw collar to secure the canopy.
8. Install the glass shade over the socket and secure it with the
   socket ring.
9. Install the bulb (not included) into the socket.

Note: All electrical components must be installed by a licensed
electrician in accordance with the National Electric Code and the
appropriate local electrical codes.
You will need 8-Medium Base Bulb 60 Watts Recommended 100 Watts
Max. Use LED bulbs for extended use.

CRYST RAMA
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL#KEE-A3008-BF

Crystorama.com

WARNING:

ROD 1= ROD 2=

1Pc 6″
3Pcs 12″

5-7/8” 7/8”
ROD 1

55-3/4”

ROD 2

Electrical Danger Turn Power off
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need 8-Medium Base Bulb 60 Watts Recommended 100 Watts Max. USE LED BULBS FOR EXTENDED USE
How to install
1.Determine the preferred hanging height and adjust to the required rods.
2.Feed the wires through the rods and connect them together.
3. Slip collar ring and canopy over the rod assembly. 4.Slip mounting strap with swivel along wire and
thread it into the top of the rod assembly. 5.Raise fixture up and attach mounting plate to the
outlet box using two outlet box screws. 6.Slip canopy up along rods and over mounting plate
with swivel and hold in it position. Slip collar ring up to canopy and thread it onto screw collar, to secure canopy. 7.Install the glass shade over the socket, and secure with the socket ring. 8.Install the bulb(not included) into socket.

COUPLING 28”

3-5/8”

5-3/4”

22-5/8”

6”

WARNING: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov

CRYST RAMA
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL#KEE-A3008-BF

Crystorama.com

Part Number
Part Numbers A. (1)-Mounting hardware B. (1)-Canopy W5-7/8”xH7/8” #XRF3004BFCAN5.875IN C. (1)-Collar ring D. (1)-Rod D5/8”xL6” #XRF3004BFROD6IN E. (3)-Rod D5/8”xL12” XRF3004BFROD12IN F. (1)-Coupling G. (8)-Socket H. (8)-Glass shade #XRF3004SHA6IN I. (8)-Socket ring

SCREW COLLAR SWIVEL
C

A
COLLAR RING
B
D

E

I

F

H

G

References

• Crystorama Lighting
• P65Warnings.ca.gov