5/6 inch LED Recessed Lighting 12 Pack
Installation Guide
ACCESSORIES INSTALLATION
If you do not find a C-clip in your can, please follow the steps below to install the C-clips before starting to install the downlight. 
INSTALLATION STEPS
- Turn off a circuit breaker that provides power to the light switch for the recessed lights.
- Thread the Socket Adapter into the socket.
- Plug the female connector of the retrofit trim onto the male connector of the socket adapter assembly.
- Plug the female connector of the retrofit trim onto the male connector of the housing.
- If using torsion springs, squeeze both torsion spring arms together and insert into the torsion spring slots (or c-clips) of the can Tuck all wires into the can and carefully push the retrofit trim into the can (NOTE: to provide enough room in shallow cans carefully position SOCKET ADAPTER and SOCKET adjacent to the side of the LED DRIVER prior to inserting the RETROFIT TRIM into the CAN).
- Turn on the circuit breaker and test light
