F11-10CA Charging Trolley
Product Information
The F11-10CA Charging Trolley is a device that allows you to
charge up to 10 tablets simultaneously. It has a 100-120V input and
a 5V 2.4A max output, which complies with Apple 2.4A(Divider1/2/3),
Samsung(D+/D- 1.2V), BC 1.2 1Opes charging standards. The trolley
has LED indicators that show the charging status of the devices,
with green indicating fully charged or no load, and red indicating
charging. The trolley has a slot size of 10.63×8.27×1.02 inches and
a case size of 21.65×16.54×11.22 inches.
Product Usage Instructions
Before using the Charging Trolley, read the user manual
carefully and save it for future reference.
Charging
- Place the charging trolley on a flat surface near an AC socket,
ensuring that the ventilation system is not covered. - Open the charging trolley.
- Insert the power cord plug into the external connector of the
charging trolley and connect the other end with the AC socket. - Press the power button to turn on the charging trolley.
- Put tablets into the inner compartments of the trolley, connect
USB ports and tablets with USB cables, then tablets are charged. To
keep the cables organized, tie them up into small loops.
Cleaning
Always unplug the charging trolley before you clean it. Clean
the surface with a soft dry cloth.
Storage
Store the charging trolley in conditions of temperature -13 –
122 and relative humidity 20-90% RH non-condensing.
Move and Transportation
- Press the power button to turn off the charging trolley.
- Unplug the USB cables.
- Unplug the AC power cord.
- Make sure all the accessories are stored well in the correct
position. - Close the charging trolley and lock the latches.
Environment
Do not throw away the appliance as normal household waste, but
hand it in at an official collection point for recycling to help
preserve the environment.
User Manual
F11-10CA
Introduction
Please read this User Manual, as it contains information about the wonderful features of this Charging Trolley as well as some tips to make more enjoyable.
Important
Read this user manual carefully before you use the appliance. Save it for future reference.
Danger
Make sure the AC power section (plug/socket) does not get wet.
Specification:
Model Input Output/Port
Charging Standard Complied with Charging Ability LED Indicators Slot Size Case Size
F11-10CA 100-120V-50/60Hz 4A Max 5V 2.4A Max Apple2.4A(Divider1/2/3), Samsung(D+/D- 1.2V), BC 1.2 1Opes USB-A Device Green: Fully Charged/No Load Red: Charging 10.63×8.27×1.02″ 21.65×16.54×11.22”
Charge
1.Put the charging trolley on flat surface near an AC socket. Ensure the ventilation system not be covered.
tJ
jL1 2
2.0pen the charging trolley.
3.lnsert the power cord plug into the external connector of charging trolley and connect the other end with AC socket.
4.Press “I” to power the charging trolley.
J
5.Put tablets into the inner compartments of trolley, connect USB ports and tablets with USB cables, then tablets are charged. Tips: The USB cables can be easily managed by tying them up into small loops.
Cleaning
Always unplug the charging trolley before you clean it. Clean surface with a soft dry cloth.
Storage
Store charging trolley in the conditions of temperature -13 – 122 and relative humidity 20-90% RH non-condensing.
Move and Transportation
1.Press “O” to turn off the power 2.Unplug the USB cables. 3.Unplug the AC power cord. 4.Make sure all the accessories are stored well in the correct position. 5.Close the charging trolley and lock latches.
Environment
Do not throw away the appliance as the normal household waste, but hand them in at an official collection point for recycling. By doing this, you help to preserve the environment.
