Product Information: Charging Trolley C11-10C

The Charging Trolley C11-10C is a device that allows you to
safely charge multiple tablets at the same time. It has a maximum
charging ability of 6.8A and features LED indicators that show when
devices are fully charged or actively charging. The trolley is
compliant with various charging standards including PD3.0,
QC4/QC4+, Apple2.4A(Divider1/2/3), Samsung(D+/D- 1.2V), BC 1.2. The
trolley has a slot size of 10.63×8.27×1.02 inches and case size of
21.65×16.54×11.22 inches.

Usage Instructions:

Place the charging trolley on a flat surface near an AC socket.
Ensure the ventilation system is not covered.
Open the charging trolley.
Insert the power cord plug into the external connector of
charging trolley, press down the silver slider and with it pointing
upwards. Then turn the plug to the right until the slider clicks
into place and connect the other end with AC socket.
Press the power button to turn on the charging trolley.
Place tablets into the inner compartments of the trolley,
connect USB ports, and tablets with USB cables, then tablets will
begin to charge.

Note: The USB cables can be easily managed by tying them up into
small loops.

Cleaning:

Always unplug the charging trolley before cleaning it. Clean the
surface with a dry damp cloth.

Storage:

Store the charging trolley in conditions of temperature -13 –
122 and relative humidity 20-90% RH non-condensing.

Move and Transportation:

Press the power button to turn off the charging trolley.
Unplug the USB cables.
Unplug the AC power cord.
Make sure all the accessories are stored well in the correct
position.
Close the charging trolley and lock latches.

Environment:

Do not throw away the appliance as normal household waste, but
hand them in at an official collection point for recycling. By
doing this, you help to preserve the environment.

View Fullscreen

User Manual

C11-10C

Introduction
Please read this User Manual, as it contains information about the wonderful features of this Charging Trolley as well as some tips to make more enjoyable.

Important
Read this user manual carefully before you use the appliance. Save it for future reference.

Danger
Make sure the AC power section (plug/socket) does not get wet

Specification:

Model Input Output/Port
Charging Standard Complied with
Charging Ability LED Indicators Slot Size Case Size

C11-10C 100-120V-50/60Hz 6.8A Max 5V-3A 9V-2A 12V-1.5A Max PD3.0, QC4/QC4+, Apple2.4A(Divider1/2/3), Samsung(D+/D- 1.2V), BC 1.2 1Opes USB-C Device Green: Fully Charged/No Load Red: Charging 10.63×8.27×1.02″ 21.65×16.54×11.22”

Charge
1.Put the charging trolley on flat surface near an AC socket. Ensure the ventilation system not be covered.
L 4L

2.0pen the charging trolley.

3.lnsert the power cord plug into the external connector of charging trolley, press down the silver slider and with it pointing upwards. Then turn the plug to the right until the slider clicks into place and connect the other end with AC socket.

4.Press “I” to power the charging trolley.

5.Put tablets into the inner compartments of trolley, connect USB ports and tablets with USB cables, then tablets are charged. Tips: The USB cables can be easily managed by tying them up into small loops

Cleaning
Always unplug the charging trolley before you clean it. Clean surface with a dry damp cloth.

Storage
Store charging trolley in the conditions of temperature -13 – 122 and relative humidity 20-90% RH non-condensing.

Move and Transportation
1.Press “O” to turn off the power 2.Unplug the USB cables. 3.Unplug the AC power cord. 4.Make sure all the accessories are stored well in the correct position. 5.Close the charging trolley and lock latches.

Environment
Do not throw away the appliance as the normal household waste, but hand them in at an official collection point for recycling. By doing this, you help to preserve the environment.