Product Information
Product Name: Bosch Cabin Filters
Manufacturer: Robert Bosch (Australia) Pty. Ltd.
Address: 1555 Centre Road Clayton VIC 3168
Contact Information:
- Email: [email protected]
- Australia Phone: 1300 307 040
- Australia Website: www.boschaftermarket.com.au
- New Zealand Phone: 0800 452 896
- New Zealand Website: www.boschaftermarket.co.nz
Part Number: AP-H09 0986 AF7 002
Estimated Installation Time: 5-10 minutes
Recommended Replacement Time: 1 year or 10,000km
Installation Guide Accuracy: May 2022
Product Usage Instructions
H09 Cabin Filter Installation Guide
- How to remove the glove box:
- Open the glove box
- Remove the stoppers (2 places) by pressing from both sides
Filter:
- Remove the old Cabin Filter by pulling it toward yourself from
the left side - Insert the Bosch Cabin Filter so that the AIR FLOW arrow faces
downward - Restore the removed vehicle parts to their original
positions
Attention: Replace the Cabin Filter as soon as
possible when driving in heavily soiled areas.
Robert Bosch (Australia) Pty. Ltd. 1555 Centre Road Clayton VIC 3168
For Further information please contact Bosch on: Email: [email protected] Australia: 1300 307 040 www.boschaftermarket.com.au New Zealand 0800 452 896 www.boschaftermarket.co.nz
Bosch
Installation Guidelines for Cabin Filters
Part Number: AP-H09 0986 AF7 002
please be sure to read this book to ensure safe and correct installation. Estimated Installation Time: 5-10 minutes
time.
Recommended replacement time
1 year or 10,000km
soon as possible when driving in heavily soiled areas. The contents of this installation guide are accurate as of May 2022
Precautions for installation and use
· Be sure to park your vehicle in a safe place with the engine and air conditioner turned off before commencing the replacement process.
· · This guide is just an example and may differ from the actual vehicle. · Please refrain from unreasonable work. It may result in damaging the vehicle or
personal injury. · · Check the direction of the arrow so that you do not mistake the front and back ·
H09 Cabin Filter Installation Guide
1. How to remove the glove box
Stopper
Push
Push Glove Box
1. Open the glove box 2. Remove the stoppers (2 places) by pressing from both sides
2. How to replace your Cabin Filter with a Bosch Cabin Filter
2. Remove the old Cabin Filter by pulling it toward yourself
Filter Cover
1. toward yourself from the left side
3. Insert the Bosch Cabin Filter so that the “AIR FLOW” arrow faces downward. 4. Restore the removed vehicle parts to their original positions.
Attention
· This work procedure is an example and may vary across different vehicles. ·
arrow may indicate “TOP” on other genuine or IAM products. · Please read the “Precautions for installation and use” on the installation guide cover
before commencing. ·














