Product Information:
- Manufacturer: Robert Bosch (Australia) Pty. Ltd.
- Address: 1555 Centre Road Clayton VIC 3168
- Contact Information:
- Email: [email protected]
- Australia Phone: 1300 307 040
- Australia Website: www.boschaftermarket.com.au
- New Zealand Phone: 0800 452 896
- New Zealand Website: www.boschaftermarket.co.nz
- Product Name: Cabin Filters
- Part Number: AP-Z05 0986 AF7 016
- Installation Time: 20 – 30 minutes
- Recommended Replacement Time: 1 year or 10,000km
- Publication Date: May 2022
Product Usage Instructions:
- Read the installation guidelines carefully to ensure safe and
correct installation. - Estimated installation time is 20 – 30 minutes.
- Recommended replacement time is 1 year or 10,000km.
- Replace the cabin filters as soon as possible when driving in
heavily soiled areas. - Follow the steps below for installation:
- Remove the stoppers (2 places) at the foot of the passenger
seat. - Remove the adapter cover.
- Remove the clip (1 place) and pull off the center side
cover. - Remove the harness clip (1 place) on the back of the fuse
box. - Remove the screws (4 places).
- Remove the nuts (2 places) on the back side of the fuse box at
the foot of the passenger seat. Using a 12mm deep socket makes this
easier to do. - Turn the fuse box stoppers (2 places) to release it.
- Raise and pull out the lower cushion.
- Restore the removed vehicle parts to their original
positions.
- Remove the stoppers (2 places) at the foot of the passenger
Attention: The contents of this installation
guide are accurate as of May 2022.
Robert Bosch (Australia) Pty. Ltd. 1555 Centre Road Clayton VIC 3168
For Further information please contact Bosch on: Email: [email protected] Australia: 1300 307 040 www.boschaftermarket.com.au New Zealand 0800 452 896 www.boschaftermarket.co.nz
Bosch
Installation Guidelines for Cabin Filters
Part Number: AP-Z05 0986 AF7 016
please be sure to read this book to ensure safe and correct installation. Estimated Installation Time: 20 – 30 minutes
time.
Recommended replacement time
1 year or 10,000km
soon as possible when driving in heavily soiled areas. The contents of this installation guide are accurate as of May 2022
Precautions for installation and use
· Be sure to park your vehicle in a safe place with the engine and air conditioner turned off before commencing the replacement process.
· · This guide is just an example and may differ from the actual vehicle. · Please refrain from unreasonable work. It may result in damaging the vehicle or
personal injury. · · Check the direction of the arrow so that you do not mistake the front and back ·
Z05 Cabin Filter Installation Guide
Harness clip
Stopper 1. Remove the stoppers (2 places) at the foot of the passenger seat. 2. Remove the adapter cover.
1. Remove the clip (1 place) and pull off the center side cover.
Clip
1. Remove the harness clip (1 place) on the back of the fuse box
1. Remove the screws (4 places)
Stopper
1. Remove the nuts (2 places) on the back side of the fuse box at the foot of the passenger seat.
* Using a 12mm deep socket makes this easier
to do.
1. Turn the fuse box stoppers (2 places) to release it 2.
1. raise and pull out the lower
1. ·
is down) and push it down ·
cushion) 2. Restore the removed vehicle
parts to their original positions
Attention
· This work procedure is an example and may vary across different vehicles. ·
arrow may indicate “TOP” on other genuine or IAM products. · Please read the “Precautions for installation and use” on the installation guide cover
before commencing. ·















