Product Information:
- Manufacturer: Robert Bosch (Australia) Pty. Ltd.
- Address: 1555 Centre Road Clayton VIC 3168
- Contact Information:
- Email: [email protected]
- Australia Phone: 1300 307 040
- Website: www.boschaftermarket.com.au
- New Zealand Phone: 0800 452 896
- Website: www.boschaftermarket.co.nz
- Product Name: Bosch Cabin Filters
- Part Number: AP-S08 0986 AF7 017
Product Usage Instructions:
Please follow the steps below for safe and correct installation
of the Bosch Cabin Filters:
- Read the installation guide carefully before proceeding with
the installation. - Estimated installation time: 5 – 10 minutes.
- Recommended replacement time: 1 year or 10,000km.
- Replace the cabin filters as soon as possible when driving in
heavily soiled areas. - Make sure to restore any removed vehicle parts to their
original positions.
Precautions for Installation and Use:
Please take note of the following precautions:
- Use only genuine Bosch Cabin Filters (Part Number: AP-S08 0986
AF7 017). - Refer to the installation guide for specific instructions on
removing the glove box. - Handle the cabin filters with care to avoid damage.
- Ensure proper positioning and alignment of the cabin filters
during installation. - For any further questions or concerns, please contact Bosch
using the provided contact information.
Robert Bosch (Australia) Pty. Ltd. 1555 Centre Road Clayton VIC 3168
For Further information please contact Bosch on: Email: [email protected] Australia: 1300 307 040 www.boschaftermarket.com.au New Zealand 0800 452 896 www.boschaftermarket.co.nz
Bosch
Installation Guidelines for Cabin Filters
Part Number: AP-S08 0986 AF7 017
please be sure to read this book to ensure safe and correct installation. Estimated Installation Time: 5 – 10 minutes
time.
Recommended replacement time
1 year or 10,000km
soon as possible when driving in heavily soiled areas. The contents of this installation guide are accurate as of May 2022
Precautions for installation and use
· Be sure to park your vehicle in a safe place with the engine and air conditioner turned off before commencing the replacement process.
· · This guide is just an example and may differ from the actual vehicle. · Please refrain from unreasonable work. It may result in damaging the vehicle or
personal injury. · · Check the direction of the arrow so that you do not mistake the front and back ·
S08 Cabin Filter Installation Guide
1. How to remove the glove box
Stopper
Knob 1.
1. Open the glove box 2. Push the glove box inward in the order of left -> right
and pull it towards yourself 3. Remove the stopper 4. Take out the glove box
1. 2.
arrow pointing downards 3. Restore the removed vehicle parts to their original
positions
Attention
· This work procedure is an example and may vary across different vehicles. ·
arrow may indicate “TOP” on other genuine or IAM products. · Please read the “Precautions for installation and use” on the installation guide cover
before commencing. ·














