NTG 2.5 Quadlock Adaptor Cable
Product Information
The product is a portable speaker that connects to devices via
Bluetooth technology. It has a rechargeable battery that provides
up to 8 hours of playtime. The speaker is equipped with a built-in
microphone for hands-free calling and voice assistant access. It
also has a 3.5mm audio jack for non-Bluetooth devices.
Product Features:
- Bluetooth connectivity
- Rechargeable battery (up to 8 hours playtime)
- Built-in microphone for hands-free calling and voice assistant
access - 3.5mm audio jack
- Portable design
Usage Instructions
To use the portable speaker, first ensure that the speaker is
fully charged. The charging time may vary depending on the
remaining battery level. Once fully charged, turn on the speaker by
pressing and holding the power button until the LED light turns on.
The speaker will automatically enter pairing mode.
To connect your device, enable Bluetooth on your device and
search for available Bluetooth devices. Select the speaker from the
list of available devices and pair the devices by following the
on-screen instructions.
If your device does not support Bluetooth or you prefer to use a
wired connection, you can use the 3.5mm audio jack on the speaker
to connect to your device using an audio cable.
To answer calls, press the answer button on the speaker when
receiving a call. To end a call, press the same button again. To
activate voice assistant, press and hold the answer button until
the voice assistant activates.
To turn off the speaker, press and hold the power button until
the LED light turns off.
TAFFIO® Mercedes Benz S SL CL R CLASS NTG1 to NTG 2.5 Quadlock Adaptor Cable Installation
EN: The amplifier is located behind the driver’s seat in the footwell or on the driver’s side in the boot. Unplug the connector here and connect to the supplied connector as shown in the picture below. Connect the blue cable (radio antenna) to 12V+. DE: Der Verstärker befindet sich hinter dem Fahrersitz im Fußraum oder auf der Fahrerseite im Kofferraum. Stecken Sie den Stecker hier ab undverbinden Sie mit dem mitgelieferten Stecker wie unten im Bild zu sehen. Das Blaue Kabel (Radio Antenne) verbinden Sie mit 12V+.
Stecker A B und C können Sie an die angezeigten Steckplätze einstecken.
