Jegs 555-81448 72 Inch Mobile Tool Chest User Guide

555-81448 72 Inch Mobile Tool Chest

Product Information

The JEGS Mobile Stainless Steel 15-drawer Tool Chest is made of
fingerprint-resistant stainless steel construction with a worktop.
The tool chest has 15 drawers, including three different sizes –
medium, large, and extra-large. The drawers are made of thick
wooden material with aluminum pull handles and non-slip liners. The
tool chest comes with four casters, two fixed and two swivel with
brakes, and heavy-duty side handles for comfort and control when
maneuvering. It also has a lock and keys for security purposes.

Specifications

Product Usage Instructions

Please read the following instructions carefully before using
the tool chest.

Installation

1. Attach the handle to the tool chest’s top with 1/4 in. x 1/2
   in. bolts, lock washer, and flat washers. See Figure 01 for
   reference.
2. To fit the swivel/locking casters, lay down the tool chest
   carefully upside down on a soft mat for protection. Insert the
   bolts through each caster and into the bottom of the cabinet.
   Tighten securely. See Figure 02 for reference.
3. The new drawer slides may be stiff and difficult to open at
   first. A gentle outward pull should release the safety that
   prevents the drawer from opening while the cabinet is being moved.
   Repeat for all drawers. See Figure 03 for reference.

Maintenance

1. To clean the tool chest, use a soft cloth that will not scratch
   the surface.
2. DO NOT use solvents of any kind as they may damage the
   surface.
3. Liquid spills should be removed immediately. Use a soft clean
   cloth to blot the spill gently and avoid rubbing.
4. Grease the casters with good quality grease once a year.
5. Lubricate the drawer slides twice a year with light-duty
   oil.

IMPORTANT: This tool chest is pre-wired to
connect to a power supply circuit that has a verified ground and
meets the following requirements. Socket Power Cord with Plug Power
Strip 110V CIRCUIT REQUIREMENTS

Mobile Tool Chest Assembly Guide
555-81448
Stainless Steel | 15-Drawer | 72 in.

Parts List

#

DESCRIPTION

1 Cabinet Top 2 Handle 3 Bolt (1/4 in. x 1/2 in.) 4 Power Strip

5 Power Cord

6 Drawer (Medium 1/2)

QTY
1 1 4 1 1 6

#

DESCRIPTION

7 Drawer (Large 1/2)

8 Drawer (X-Large 1/2) 9 Drawer Sliders

10 Caster (Locking Swivel)

11 Bolts (3/8 in x 1 in.) 12 Lock & Key

QTY
2 2 36 2 16 1

#

DESCRIPTION

13 Drawer (Medium)

14 Drawer (Large) 15 Drawer (X-Large) 16 Drawer Liner (Narrow)

17 Drawer Liner (Wide) 18 Caster (Fixed)

QTY
3 1 1 10 5 2

1

Introduction

Safety

We would like to take this opportunity to thank you for purchasing this JEGS Mobile Stainless Steel 15-drawer Tool Chest. We welcome any comments or feedback you might have. If you have any questions about this product or about the installation procedure, please feel free to contact us at 1.800.345.4545.

Fingerprint resistant stainless steel

construction with a worktop. 100 lb.

c1ap1a/c4 itiyn.

thick wooden drawers with

aluminum pull handles and non-slip liners.

Four casters, two fixed and two swivel (which

include brakes). Comes with heavy-duty side

handles for comfort and control when

maneuvering. Supplied with lock and keys.

IMPORTANT
Please read these instructions carefully. Note the safe operation requirements, warnings, and cautions. Use this product for the purpose for which it is intended. Failure to do so may result in damage and/or personal injury, and will void the warranty. Keep these instructions in a safe place for future use.

· Locate in a suitable work area.
· Monitor children near the cabinet.
· Do not open more than one drawer at a time. · Fill from the bottom drawer.
· If the tool cabinet is filled from the top drawer down, it will be top heavy and may fall over.
· Do not attempt to lift by the side handles, use chains, ropes or other lifting devices.
· Do not use the cabinet as a step or climb on the drawers.
· Do not alter the product in any way. · Do not weld on external lock bars or attach electrical equipment. · Doing so may damage the product and cause personal injury.
· Keep on a level surface
· When moving the cabinet DO NOT pull it. Push the cabinet to prevent injury.
· Close and lock the drawers before moving the cabinet. If the drawers come open they could make the cabinet unstable.

QTY
6 2 2 3 1 1

SPECIFICATIONS

COMPONENT
Overall Size Medium 1/2 Drawer Large 1/2 Drawer X-Large 1/2 Drawer Medium Drawer Large Drawer X-Large Drawer

DIMENSIONS (WxDxH) IN. 78.250 x 19.125 x 37.250 14.850 x 15 x 2.500 14.850 x 15 x 5.500 14.850 x 15 x 8.750 33.750 x 15 x 2.500 33.750 x 15 x 5.500 33.750 x 15 x 8.750

· Apply brake when the cabinet is in the desired position.
· Do not mount on a truck bed or any other moving object.
· Be aware of sharp edges.

2

Installation
HANDLE (Fig.01) 1. Attach with 1/4 in. x 1/2 in. bolts, lock washer
and flat washers.
Figure 01

Figure 02

CASTERS (Fig.02) 1. WARNING. Two or more people are required
to lay down or stand up the cabinet. Lock drawers before turning over.
2. Carefully lay the cabinet upside down on a soft mat for protection
3. Fit the swivel/locking casters on the handle side of the cabinet using 3/8 in. x 1 in. bolts. Insert the bolts through each caster and into the bottom of the cabinet. Tighten securely.

DRAWERS (Fig.03) 1. New drawer slides may be stiff and difficult
to open at first. A gentle outward pull should release the safety that prevents the drawer from opening whilst the cabinet is being moved.
2. Remove drawers from their slides as below. · Pull left slide tab down and pull right side slide tab up.
Figure 03

4. Repeat for the two rigid casters on the other side of the cabinet.

3

Maintenance

1. To clean use a soft cloth that will not scratch the surface.

Figure 04

2. DO NOT use solvents of any kind they may damage the surface.
3. Liquid spills should be removed immediately, use a soft clean cloth to blot the spill gently avoid rubbing.
4. Grease the casters with good quality grease once a year.

Socket Power Cord with Plug
Power Strip

5. Lubricate the drawer slides twice a year with light duty oil.

110V CIRCUIT REQUIREMENTS This tool chest is pre-wired to connect to a power
supply circuit that has a verified ground and meets the following requirements.

Electronics
POWER STRIP (Fig.04) This cabinet features a pre-installed power strip with (4) 5-15 outlets and (2) USB ports, conveniently located for easy access. The included power strip has the following ratings:
Maximum Amperage Load……………..12A Maximum Voltage…………………………125V Cycle…………………………………………….60 Hz Maximum Wattage…………………….1500W USB Output………………….5VDC, Max. 2.1A
Plug the provided power cord into the power strip socket.

Nominal Voltage………..110V, 115V, 120V Cycle………………………………………………60Hz Phase…………………………………Single-Phase Power Supply Circuit………………..15 Amps
A power supply circuit includes all electrical equipment between the breaker box or fuse panel in the building and the power strip. The power supply circuit used for this power strip must be sized to safely handle the full-load current drawn from the power strip for an extended period of time. (If this power strip is connected to a circuit protected by fuses, use a “D” time delay fuse.
GROUNDING & PLUG REQUIREMENTS This power strip MUST be grounded. In the event of certain malfunctions or breakdowns, grounding reduces the risk of electric shock by providing a path of least resistance for electric current.

4

Electronics

This power strip is equipped with a power cord that has an equipment-grounding wire and a grounding plug. Only insert plug into a matching receptacle (outlet) that is properly installed and grounded in accordance with all local codes and ordinances. DO NOT modify the provided plug!
Grounded 5-15 Receptacle
Neutral Hot
WARNING
Electrocution, fire, shock, or equipment damage may occur if power strip is not properly grounded and connected to power supply.

WARNING
· Do not connect to plug receptacle via extension cords or in series with other power strips.
· Keepelectricalconnectionsclearofflammable materials.
· Keep electrical connections dry. Do not use in damp or wet conditions.
· Do not connect devices to power strip that draw more than listed power strip rating. Equipment must be used in accordance with the instructions.
· Power strips are designed for use with low-powered loads, such as battery chargers. Not designed for use with high-powered loads, such as space heaters or microwaves.
· Do not run cord under floor coverings or where it may be tripped over.
· Not meant for outdoor use.
· Prevent unauthorized use by children or untrained users.

5