Forte Lighting 55007-01-55 Morgan Led Wall Sconce Instruction Manual

55007-01-55 Morgan LED Wall Sconce

Product Information:

Item No: 55007-01-XX

This product is a lamp that comes with all the necessary
components for assembly. It includes a crossbar (A), screws (B),
hexagon nuts, wire nuts, a canopy (D), finials (C), an LED bulb T10
(H), a glass shade (F), a glass holder (E), and a metal cover
(G).

Product Usage Instructions:

1. Remove the lamp from its packaging and place all the pieces on
   a flat surface.
2. Ensure that the circuit to the wiring is turned off at the main
   breaker box.
3. Mount the crossbar (A) to the electrical box using the supplied
   screws.
4. Adjust the length of screws (B) on the crossbar by using the
   small hexagon nuts.
5. Attach the black wire (fixture) to the live wire from the
   housing using a wire nut.
6. Attach the white wire (fixture) to the neutral wire from the
   housing using a wire nut.
7. Attach the ground wire (fixture and housing) to the green screw
   on the crossbar (A).
8. Slide the canopy (D) over screws (B) and secure it with finials
   (C).
9. Install the included LED bulb T10 (H) into the lampholder.
10. Put the glass shade (F) into the glass holder (E), then place
    the metal cover (G) over the glass shade (F).
11. Re-connect power to the circuit, turn on the lamp, and
    enjoy.

Please inform your dealer immediately in case of any parts
shortage. Save these instructions for future reference.

ITEM NO: 55007-01-XX ASSEMBLY INSTRUCTIONS
1.Remove lamp from packaging and place all pieces on a flat surface. 2.Make sure circuit to wiring is turned off at main breaker box. 3.Mount crossbar(A) to electrical box using supplied screws. 4.Adjust the length of screws(B) on crossbar by small hexagon nuts. 5.Attach black wire(fixture) to live wire from housing using wire nut.
Attach white wire(fixture) to neutral wire from housing using wire nut. Attach ground wire(fixture and housing) to green screw on crossbar(A). 6.Slide canopy(D) over screws(B), and secure canopy with finials(C). 7.Install LED bulb T10(H) to lampholder.(bulb included) 8.Put the glass shade(F) into glass holder(E), then place the metal cover(G) over the glass shade(F). 9.Re-connect power to circuit, turn on lamp and enjoy.
* PLEASE INFORM YOUR DEALER IMMEDIATELY IN CASE OF ANY PARTS SHORTAGE. * SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.