Dyson Dbwifible05 Wireless Local Area Network Module User Manual (+ PDF)

Home » Blog » Dyson Dbwifible05 Wireless Local Area Network Module User Manual

Contents hide

1 DBWIFIBLE05 Wireless Local Area Network Module

DBWIFIBLE05 Wireless Local Area Network Module

Product Information: Product Name: DBWIFIBLE05 Author:
Wistron NeWeb Corporation Revision: 0.2 Revision Date: 2022/06/13
Product Usage Instructions: 1. Installation: – Ensure that
the antenna is installed in a way that maintains a distance of 20
cm between the antenna and users. – The transmitter module should
not be co-located with any other transmitter or antenna. 2. FCC
Compliance: – Follow the Federal Communication Commission (FCC)
guidelines to minimize interference: – Reorient or relocate the
receiving antenna. – Increase the separation between the equipment
and receiver. – Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. – Consult
the dealer or an experienced radio/TV technician for help. – Any
changes or modifications not expressly approved by the responsible
party could void the user’s authority to operate this equipment. –
The device complies with Part 15 of the FCC Rules, meaning it
should not cause harmful interference and must accept any
interference received. 3. Radiation Exposure: – The equipment
complies with FCC radiation exposure limits for an uncontrolled
environment. – Install and operate the equipment with a minimum
distance of 20 cm between the radiator and your body. 4. Country
Code Selection: – If marketing the product in the US/CANADA,
disable the country code selection feature. 5. Integration
Instructions for Host Product Manufacturers: – Follow applicable
FCC rules (FCC Part 15.247) for module integration. – The module
must be installed in a mobile device. – The device is intended only
for OEM integrators under the following conditions: – The antenna
must be installed with a distance of 20 cm maintained between the
antenna and users. – The transmitter module should not be
co-located with any other transmitter or antenna. – For products
marketed in the US, limit the operation channels in CH1 to CH11 for
the 2.4G band using the supplied firmware programming tool. – The
OEM should not provide any tool or information to end-users
regarding Regulatory Domain change. – As long as the above
conditions are met, further transmitter tests will not be required.
Please ensure to carefully follow these instructions for proper
usage and compliance with FCC regulations.

View Fullscreen

DBWIFIBLE05 User Manual

Project Name: DBWIFIBLE05 Author: Wistron NeWeb Corporation Revision: 0.2 Revision Date: 2022/06/13

Normal Internal Use Confidential Restricted Confidential

1 / 25

Revision History

REV

Author

Summary Changes

0.1

Jim Chuang

SGA(ES1) Draft Product Spec

0.2

Jim Chuang

SGB(ES2) Draft Product Spec

DBWIFIBLE05 User Manual
Date 2021/12/08 2022/06/13

Normal Internal Use Confidential Restricted Confidential

2 / 25

DBWIFIBLE05 User Manual

© Wistron NeWeb Corporation
THIS DOCUMENT AND THE INFORMATION CONTAINED HEREIN IS PROPRIETARY AND IS THE EXCLUSIVE PROPERTY OF WNC AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN PERMISSION FROM WNC.

LIMITATION OF LIABILITY
THIS DOCUMENT AND THE INFORMATION CONTAINED HEREIN IS PURELY FOR DESIGN REFERENCE AND SUBJECT TO REVISION BY WNC AT ANY TIME. NOTHING IN THIS DOCUMENT SHALL BE CONSTRUED AS GRANTING ANY WARRANTY OR RIGHT TO USE THE MATERIAL CONTAINED HEREIN WITHOUT WNC’S PRIOR EXPRESS WRITTEN CONSENT. WNC SHALL NOT BE LIABLE FOR ANY USE, APPLICATION OR DEVELOPMENT DERIVED FROM THE MATERIAL WITHOUT SUCH PRIOR EXPRESS WRITTEN CONSENT.

Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA

Normal Internal Use Confidential Restricted Confidential

3 / 25

DBWIFIBLE05 User Manual

Integration instructions for host product manufacturers Applicable FCC rules to module FCC Part 15.247

Summarize the specific operational use conditions The module is must be installed in mobile device. This device is intended only for OEM integrators under the following conditions:

1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna

3) For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G

band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding

to Regulatory Domain change. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM

integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed.

IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop

configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM

integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. The OEM integrator has to be aware not to provide information to the end

user regarding how to install or remove this RF module in the user’s manual of the end product which

integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.

Limited module procedures Not applicable

Trace antenna designs Not applicable

RF exposure considerations 20 cm separation distance and co-located issue shall be met as mentioned in “Summarize the specific operational use conditions”.

Product manufacturer shall provide below text in end-product manual

“This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.”

Antennas

Brand name Model name

Antenna type

Antenna gain

Antenna connector

Dyson ANT2_1370X950

PIFA

2400~2483.5MHz: 2.12dBi

5150~5250MHz: 2.59dBi

5250~5350MHz: 2.62dBi

5470~5725MHz: 2.79dBi

5725~5850MHz: 3.44dBi

Changing the antenna type, gain, including the trace design while installing the host may requires to be recertified via FCC class change procedure

Normal Internal Use Confidential Restricted Confidential

4 / 25

DBWIFIBLE05 User Manual
Label and Compliance Information Product manufacturers need to provide a physical or e-label stating “Contains FCC ID: QVHDBWIFIBLE05” with finished product Information on Test Modes and Additional Testing Requirements Test tool: Tera Term, V4.89 shall be used to set the module to transmit continuously. Additional Testing, Part 15 Subpart B Disclaimer The module is only FCC authorized for the specific rule parts listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed

Normal Internal Use Confidential Restricted Confidential

5 / 25

DBWIFIBLE05 User Manual

Industry Canada statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference (2) This device must accept any interference, including interference that may cause undesired operation of the device
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Caution:
(i) the device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
(iii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; and
Operations in the 5.25-5.35GHz band are restricted to indoor usage only.
Avertissement:
(i) les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
(ii) pour les dispositifs munis d’antennes amovibles, le gain maximal d’antenne permis pour les dispositifs utilisant les bandes de 5 250 à 5 350 MHz et de 5 470 à 5 725 MHz doit être conforme à la limite de la p.i.r.e;
(iii) pour les dispositifs munis d’antennes amovibles, le gain maximal d’antenne permis (pour les dispositifs utilisant la bande de 5 725 à 5 850 MHz) doit être conforme à la limite de la p.i.r.e. spécifiée, selon le cas;

Les opérations dans la bande de 5.25-5.35GHz sont limités à un usage intérieur seulement.

Normal Internal Use Confidential Restricted Confidential

6 / 25

DBWIFIBLE05 User Manual

Radiation Exposure Statement: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d’exposition aux radiations: Cet équipement est conforme Canada limites d’exposition aux radiations dans un environnement non contrôlé. Cet équipement doit être installé et utilisé à distance minimum de 20cm entre le radiateur et votre corps.
This device is intended only for OEM integrators under the following conditions: 1) The transmitter module may not be co-located with any other transmitter or antenna. As long as 1 condition above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed.
Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: 1) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne. Tant que les 1 condition ci-dessus sont remplies, des essais supplémentaires sur l’émetteur ne seront pas nécessaires. Toutefois, l’intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé.
IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate Canada authorization.
NOTE IMPORTANTE:
Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d’ordinateur portable ou de certaines co-localisation avec un autre émetteur), l’autorisation du Canada n’est plus considéré comme valide et l’ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l’intégrateur OEM sera chargé de réévaluer le produit final (y compris l’émetteur) et l’obtention d’une autorisation distincte au Canada.
End Product Labeling The final end product must be labeled in a visible area with the following: “Contains IC: 7986ADBWIFIBLE05”.

Normal Internal Use Confidential Restricted Confidential

7 / 25

DBWIFIBLE05 User Manual

Plaque signalétique du produit final Le produit final doit être étiqueté dans un endroit visible avec l’inscription suivante: “Contient des IC: 7986A-DBWIFIBLE05”.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.
Manuel d’information à l’utilisateur final
L’intégrateur OEM doit être conscient de ne pas fournir des informations à l’utilisateur final quant à la façon d’installer ou de supprimer ce module RF dans le manuel de l’utilisateur du produit final qui intègre ce module. Le manuel de l’utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiqué dans ce manuel.

Taiwan :

CCAFXXLPXXXXTX)

Normal Internal Use Confidential Restricted Confidential

8 / 25

DBWIFIBLE05 User Manual
Contents
Revision History……………………………………………………………………………………………………………….. 2 Contents…………………………………………………………………………………………………………………………. 9 1. Introduction …………………………………………………………………………………………………………… 10
1.1. Features …………………………………………………………………………………………………………………10 1.2. Block Diagram …………………………………………………………………………………………………………10 2. Electrical Specifications ……………………………………………………………………………………………. 11 2.1. Interface pin assignments…………………………………………………………………………………………11
2.1.1. Connectors Diagram for module……………………………………………………………………..11 2.1.2. Pin Assignments & Circuit of connectors for module …………………………………………12 2.2. Absolute Maximum Ratings………………………………………………………………………………………13 2.3. Recommend Operating Conditions ……………………………………………………………………………13 2.4. Connectivity ……………………………………………………………………………………………………………14 2.5. Digital logic characteristics (3.3V I/O operation)………………………………………………………….15 3. RF Specifications …………………………………………………………………………………………………….. 16 3.1. RF connections………………………………………………………………………………………………………..16 3.1.1. WIFI Typical RF performance at Antenna Connector at 25oC………………………………16 3.1.2. BT-Low Energy RF performance at Antenna Connector at 25OC ………………………….16 4. Antenna Performance ……………………………………………………………………………………………… 17 4.1. Module antenna Efficiency/Peak gain/S Parameters ……………………………………………………17 4.2. Module antenna 2D radiation pattern ……………………………………………………………………….18 5. Mechanical and Environmental Specifications………………………………………………………………. 19 5.1. PCBA form factor …………………………………………………………………………………………………….19 5.2. Module Antenna Clearance and keep-out area …………………………………………………………..19 5.3. Labeling………………………………………………………………………………………………………………….20 5.4. Moisture Sensitivity Level…………………………………………………………………………………………22 5.5. BOM ………………………………………………………………………………………………………………………22 6. Regulatory and Industry Approvals …………………………………………………………………………….. 23 6.1. Certification Country ……………………………………………………………………………………………….23 7. Safety Recommendation…………………………………………………………………………………………… 24 8. Packaging ………………………………………………………………………………………………………………. 25

Normal Internal Use Confidential Restricted Confidential

9 / 25

DBWIFIBLE05 User Manual
1. Introduction
DBWIFIBLE05 is a wireless local area network (WLAN), Bluetooth (BT) Low Energy combo module to support 2.4G/5G IEEE 802.11a/ b/g/n WLAN standards, BLE 5.0 and below. It enables seamless integration of WLAN/BT Low Energy technology with powerful embedded CPU.
1.1. Features
ARM Cortex-M33. Wi-Fi Support IEEE 802.11a/b/g/n 2.4G/5G Band, and 1×1 20 MHz bandwidth only. Bluetooth Low Energy (BLE) compliant to the SIG v5 specification. Single 3.3V supply. Internal 1 on-board antennas for WIFI and BLE and 1 optional external antenna connector. GPIO to support the peripherals interfaces:
· 10-pins(J2) SWD connector · 8-pins(J1) system controller connector · 4-pins(J3) debug UART connector
1.2. Block Diagram

Normal Internal Use Confidential Restricted Confidential

10 / 25

DBWIFIBLE05 User Manual
2. Electrical Specifications
2.1. Interface pin assignments
2.1.1. Connectors Diagram for module
There is a system control connector (J1) for power supply and SPI interface.

J1- wire to board connector Connector Location

Normal Internal Use Confidential Restricted Confidential

11 / 25

DBWIFIBLE05 User Manual
2.1.2. Pin Assignments & Circuit of connectors for module
Table 1. connectors Interface Family

Normal Internal Use Confidential Restricted Confidential

12 / 25

DBWIFIBLE05 User Manual

2.2. Absolute Maximum Ratings

Signal

Description

Max. Unit

3.3V_IN 3.3V Power Supply Input for Pin8 of J1 3.465 V

VIH GPIO pull high Voltage TA Operating Temperature

3.3V_IN + 0.3 V

2.3. Recommend Operating Conditions

Signal

Description

Min.

Typ.

Max.

Unit

3.3V_IN 3.3V Power Supply Input 3.135 (-5%) 3.3 3.465 (+5%) V

VIH GPIO pull high Voltage 3.3V_IN x 0.625

3.3V_IN + 0.3 V

VIL GPIO pull low Voltage

-0.3

3.3V_IN x 0.25 V

TA Operating Temperature

-5

Normal Internal Use Confidential Restricted Confidential

13 / 25

DBWIFIBLE05 User Manual

2.4. Connectivity

The connectivity support by module ( SGB ) include: J1 System Controller Connector (CVILUX CI4008M1VR0-NH)

Signal Name

Handshake_I

SPI MOSI

SPI MISO

SPI CLK

SPI CS

SYSRST_B

GND

3.3V_IN

J2SWD Program/Debug Connector (SAMTEC FTSH-105-01-F-DV)

Pin Signal Name

3.3V_IN

2 SWD_DATA

GND

4 SWD_CLK

GND

8 PAD_GPIO_B_12

GND

10 SYSRST_B J3 UART Debug Connector (CVILUX CI1104M1VR0-NH)

Signal Name

UART_ TXD

UART_ RXD

GND

3.3V_IN

Normal Internal Use Confidential Restricted Confidential

14 / 25

DBWIFIBLE05 User Manual

2.5. Digital logic characteristics (3.3V I/O operation)

Signal
VIH VIL VOH VOL

Description Input-High Voltage Input-Low Voltage Output-High Voltage Output-Low Voltage

Min.

Typ.

Max.

Unit

-0.3

3.3V_IN x 0.25 V

3.3V_IN x 0.625

3.3V_IN + 0.3 V

-0.3

-0.45

3.3V_IN 0.45 – 3.3V_IN + 0.3 V

Normal Internal Use Confidential Restricted Confidential

15 / 25

DBWIFIBLE05 User Manual

3. RF Specifications

3.1. RF connections

3.1.1. WIFI Typical RF performance at Antenna Connector at 25oC

2.4GHz

Standard

Modulation

Index

TX Target Power RX Sensitivity Unit

BPSK

1Mbps

802.11b

CCK

11Mbps

-95 +/-3 dBm -87 +/-3 dBm

BPSK

6Mbps

802.11g

64 QAM

54Mbps

-92 +/-3 dBm -75+/-3 dBm

802.11n

BPSK

MCS0

-89 +/-3 dBm

(HT20)

64 QAM

MCS7

-71+/-3 dBm

5GHz Standard
802.11a
802.11n (HT20)

Modulation BPSK
64 QAM BPSK
64 QAM

Index 6Mbps 54Mbps MCS0 MCS7

TX Target Power 13 13 11 11

RX Sensitivity Unit -92 +/-3 dBm -74 +/-3 dBm -89 +/-3 dBm -71 +/-3 dBm

3.1.2. BT-Low Energy RF performance at Antenna Connector at 25OC

Test Item Maximum TX power TX Power under low TX RX Sensitivity

Description 1Mbps 1Mbps 1Mbps

Typical

Unit

dBm

-26 +/-4

dBm

-94 +/-4

dBm

The data shown in the table is a preliminary pre-test data at 25OC at RF In-line connector, subject to change after the measurement.

Normal Internal Use Confidential Restricted Confidential

16 / 25

DBWIFIBLE05 User Manual
4. Antenna Performance
4.1. Module antenna Efficiency/Peak gain/S Parameters

Normal Internal Use Confidential Restricted Confidential

17 / 25

4.2. Module antenna 2D radiation pattern

DBWIFIBLE05 User Manual

Normal Internal Use Confidential Restricted Confidential

18 / 25

DBWIFIBLE05 User Manual
5. Mechanical and Environmental Specifications
5.1. PCBA form factor
5.2. Module Antenna Clearance and keep-out area

Normal Internal Use Confidential Restricted Confidential

19 / 25

5.3. Labeling

DBWIFIBLE05 User Manual

5.3.1 Barcode content

Normal Internal Use Confidential Restricted Confidential

20 / 25

5.3.2 SN Label

DBWIFIBLE05 User Manual

5.3.3 Carton label

Normal Internal Use Confidential Restricted Confidential

21 / 25

5.4. Moisture Sensitivity Level
This module compliance with MSL=3

DBWIFIBLE05 User Manual

5.5. BOM

It em 20.44008.001 21.G1001.001 63.10338.L02
63.R0008.3F1
68.12201.099 68.1R114.B01 68.2102Y.L02 68.3N1BN.101 71.37931.001 74.C7608.002
78.10034.L21
78.10134.L17 78.10420.501
78.10510.L04
78.10610.L12 78.1R074.L20 78.47510.L14 78.6R1A5.B01 78.R90A4.1J1 63.10134.L09 63.10234.002 63.R0004.L01 68.2300Y.001 69.61607.007 78.10610.L08 78.12224.L03 82.12026.004 63.10034.002 78.22034.1F1 78.68034.L17 72.22564.001 20.41104.001 20.21050.L01

Descrip t io n

Per Qty

Lo cat io n

INT ERNAL CONNECT OR,WT B,SMT ,180DEG.,MALE,1X8P,1.25MM(P),NAT URAL,CI4008M1VR0-NH

INT ERNAL CONNECT OR,MICRO RF SWSMT ,180DEG.,JACK,RF SWIT CH,(FOXCONN),KMC1001-F007-7F

CON1

GENERAL FIXED RESIST OR,SMT ,10K,J,0201,1/20W,WR02X103 JAL CHIP RESIST OR,SMT ,0,P,0201,WR02X000 PAL PWR IND,2.2UH,+/-20PCT (M),1MHZ,2.5X2.0MM,3.5A,0.074OHM,-40~,125,WIP252012S-2R2ML

WR15

R11,R12,R13,R14,R15,R16,R42,WL14,WR1 18 2,WR13,WR16,WR18,WR19,WR20,WR21,
WR5,WR6,WR9

WL12,WL13

RF IND,1.1NH,+/-0.1NH,500MHZ,0.6X0.3MM,0.6A,0.15OHM,17GHZSRF,-55~,125,LQP03T G1N1B02D

WL19

BEAD,1KOHM,+/-25%,100MHZ,0.7OHM,0.5ARMS,1.6X0.8X0.8,-40~,125,GCB1608K-102T 05-T (W)

BEAD1

CHIP IND,3.1NH,6000MHZ,0201,LQP03T N3N1B02D

WL17

FOR

DYSON,MCU,CORT EX-M33,32BIT ,300MHZ,0MB(FLASH),1MB(SRAM),DRQFN,106PIN,-40

~,125

,CLASS

U17

>=2000V~4000V,2000HBM(V),MT 7931AN

LINEAR IC,RF SWIT CH,SPDT ,20DB(ISO)@6~7.125GHZ,0.65DB(ISO)@6~7.125GHZ,3.3V,0.025MA,QFN,6PIN,-40 ~,105 ,CLASS 1

WU3

>=250V~2000V,1000HBM(V),RT C7608U

C1,WC127,WC133,WC17,WC20,WC21,WC

CHIP CAP,NPO,50V,10PF,J,0201,GRM0335C1H100JA01D

19 22,WC23,WC24,WC26,WC27,WC29,WC32

,WC35,WC43,WC44,WC45,WC88,WC89

CHIP CAP,NPO,50V,100PF,J,0201,GRM0335C1H101JA01D

WC120,WC121

CHIP CAP,X5R,6.3V,100NF,K,0201,GRM033R60J104KE19D CHIP CAP,X5R,6.3V,1UF,M,0201,GRM033R60J105MEA2D CHIP CAP,X5R,6.3V,10UF,M,0402,CL05A106MQ5NUNC

WC46,WC85,WC86,WC90,WC95

WC102,WC103,WC104,WC105,WC106,W

C107,WC110,WC134,WC135,WC18,WC19,

WC25,WC28,WC30,WC31,WC33,WC42,W

C91,WC93,WC96,WC98,WC99

WC108,WC109

CHIP CAP,NPO,50V,1PF,C,0201,GRM0335C1H1R0CA01D

WC124

CHIP CAP,X5R,6.3V,4.7UF,M,0201,GRM035R60J475ME15D

WC100,WC101,WC97

MLCC,X8 G,6 .1 P F,+-0 .0 5 P F(A),1 0 0 V,0 2 0 1 ,HIQ-Y,GJM0 3 3 5 G2 A6 R1 W B0 1 D

WR3,WR4

CHIP CAP,NPO,50V,0.9PF,A,0201,GRM0335C1HR90WA01D CHIP RES,100R,J,0402 1/16W,WR04X101JT L,-55~+155 CHIP RES,10KOHM,+-5PCT (J),0402,1/16W,-55~,155,WR04X103 JT L

WC125

R18,R19,R20,R21,R22,R30,R43,R44,R45,R4

R23,R24,R31,R37,R40,R41

CHIP RES,0R,J,0402 1/16W,WR04X000 PT L,-55~+155

R32,R34

CHIP BEAD,30OHM,+/-25,100MHZ,120OHM,100ARMS,-55C~,125C,0402,UPZ1005D300-2R2T F

FB1

DIPLEXER,2400~2500MHZ/4900~6300MHZ,0.95/1.20DB(IL),WIFI 2.4G_5G,2.0W,1.6X0.8MM,6PIN,-40~,85,RFDIP1607ELM9T 33

WU2

CERAMIC CAPACIT ORS X5R,6.3V,SMT ,10UF,M,0603,CL10A106MQ8NNNC

C11,C2,C3

CHIP CAP,X7R,50V,1200PF,K,0603,0603B122K500CT

C10,C4,C5

CRYST AL,SMT ,26.000MHZ,8PF,7PPM(FREQ),15PPM(T EMP),30OHM,2.5X2.0,-40~,85,X2B026000M81H-HS

CHIP RES,10OHM,+-5PCT (J),0402,1/16W,-55~,155,WR04X100JT L

R26,R27,R28,R29

*!R06 CHIP CAP C 22P 50V J0402 NPO

C6,C8,C9

CHIP CAP,NPO,50V,68PF,J,0402,CC0402JRNPO9BN680

NOR FLASH,SPI,64MBIT ,WSON,8PIN,2.7,3.6V,-40~,85,CLASS 1 >=250V~2000V,2000HBM(V),W25Q64JVZPIQ

INT ERNAL CONNECT OR,WT B,SMT ,180DEG.,MALE PIN,1X4P,1MM(P),NAT URAL,CI1104M1VR0-NH

INT ERNAL CONNECT OR,WT B,,SMT ,180DEG.,MALE,2X5P,1.27MM(P),FT SH-105-01-F-DV-K

Normal Internal Use Confidential Restricted Confidential

22 / 25

DBWIFIBLE05 User Manual

6. Regulatory and Industry Approvals

6.1. Certification Country

Country FCC IC NCC
CE Notify Body Japan KCC SRRC

ID QVHDBWIFIBLE05 7986A-DBWIFIBLE05
R-C-dtl-DBWIFIBLE05

Normal Internal Use Confidential Restricted Confidential

23 / 25

DBWIFIBLE05 User Manual
7. Safety Recommendation
Be sure the use of this product is allowed in the country and in the environment required. The use of this product may be dangerous and must be avoided in the following areas:
Where it can interfere with other electronic devices in environments such as hospitals, airports, and aircraft
Where there is a risk of explosion such as gasoline stations and oil refineries
It is the responsibility of the user to comply with the his or her country’s regulations and the specific environmental regulations. Do not disassemble the product; any mark of tampering will compromise the warranty’s validity. We recommend following the instructions of the hardware user guides for a correct wiring of the product. The product must be supplied with a stabilized voltage source, and the wiring must conform to the security and fire-prevention regulations. This product must be handled with care; avoid any contact with the pins because electrostatic discharge may damage the product. Same caution must be taken regarding the SIM card; carefully check the instructions for its use. Do not insert or remove the SIM when the product is in power-saving mode. The system integrator is responsible of the functioning of the final product; therefore, care must be taken for the external components of the module as well as for project or installation issues–there may be a risk of disturbing the GSM network or external devices or of having an impact on device security. If you have any doubts, please refer to the technical documentation and the relevant regulations in force. Every module must be equipped with a proper antenna with specific characteristics. The antenna must be installed with care in order to avoid any interference with other electronic devices.

Normal Internal Use Confidential Restricted Confidential

24 / 25

8. Packaging

DBWIFIBLE05 User Manual

Normal Internal Use Confidential Restricted Confidential

25 / 25