LED Opti T8 HF G3 LED T8 Retrofit Light
Product Information: – Product Name: LED T8 ECG
Compatible Tube – Suitable for use with compatible HF-Ballast –
Suitable for dry indoor usage and environments – Outdoor
applications require IP rated fixtures – Must be installed by a
professional electrician – Designed for general lighting service
(excluding explosive atmospheres) – Temperature range is more
restricted compared to traditional fluorescent lamps – Consult the
manufacturer if unsure about suitability for specific applications
– Lumen values may vary depending on HF-driver – Not suitable for
use with dimmers – Designed to replace the following fluorescent
lamps: – 600 mm: T8 G13 18W – 1200 mm: T8 G13 36W – 1500 mm: T8 G13
58W Product Usage Instructions: 1. Read the
installation instructions carefully before proceeding. 2. Ensure
that you have the necessary compatible HF-Ballast for the LED tube.
3. This LED tube is only suitable for dry indoor usage and
environments. If you plan to use it outdoors, make sure to use IP
rated fixtures. 4. It is recommended to have a professional
electrician install the LED tube. 5. Once installed, do not change
any components or structure of the LED lamp. 6. This lamp is
designed for general lighting service and should not be used in
explosive atmospheres. 7. The temperature range of this lamp is
more restricted compared to traditional fluorescent lamps. If you
are unsure about its suitability for a specific application,
consult the manufacturer. 8. Lumen values may vary depending on the
HF-driver used. 9. Before installing multiple units, test the
product and ensure its functionality. 10. Do not use this LED tube
with dimmers. 11. To replace existing fluorescent tubes: a. Remove
all existing fluorescent tubes from luminaires. b. Install the Aura
OptiT8 HF Long Life LED tube in the desired position. c. Ensure
proper installation of the tube before proceeding. For more
information, visit the manufacturer’s website: www.auralight.com
WARNING
Parts List: LED T8 ECG Compatible Tube, Installation instructions
Please read the installation instructions carefully and follow instructions to ensure safety
The LED tube is only suitable with compatible HF-Ballast
Only to apply in dry indoor usage and environments, outdoor applications requires IP rat xtures.
LED lamps must be installed by a professional electrician.
Once it is installed, do not change any components or structure of the LED lamp.
This lamp is designed for general lighting service (excluding e.g. explosive athmospheres)
Ambient temperature (Ta): -20°C to 50°C (-4°F to 122°F)
This lamp may not be suitable for use in all applications where a
traditi
rescent lamp has been used. The temperature range
of this lamp is more restricted. In case of doubt regarding the suitability
of the application the manufacturer of this lamp should be consulted.
cations of the luminaire which the LED lamp is to be used with are to be made.
Lumen-values may di er depending on HF-driver
A limited amount of drivers requir
rection
of the lamp to be installed, please test the product and
con
tionality before any larger installation
Not suitable for use with dimmers
The lamp is design to replace; – 600 mm : T8 G13 18W – 1200 mm : T8 G13 36W – 1500 mm : T8 G13 58W
www.auralight.com
Page1 (of tot 2)
AURA LED OPTI T8 HF G
cation
Length (mm)
Base
600
G13
1200
G13
1500
G13
Power (W)
1 2
Color Temperature (K) 3000 / 4000
3000 / 4000 3000 / 4000 / 5000
ECG
/ZZ >Kd,&’
Page 2 (of tot 2)
EN 1. Turn the pow SE 1. Stäng av strömmen NO 1. Slå av strømmen DK 1. Sluk for spændingen FIN 1. Katkaise virta DE 1. Schalten Sie die Leuchte
stromfrei
NL 1. Schakel de stroom uit ES 1. Desconecte la corriente FR 1. Coupez l´électricité PT 1. Desligue a corrente IT 1. Portare l´interruttore su OFF
2. Remove all existi
rescent
tubes from luminaires if any
2. Ta bort alla be ntliga rör från armaturen
2. Ta ut alle eksisteraende lysrør fra armaturen
2. Fjern alle lysstofrør fra armaturet
2. Poista valaisimista kaikki loistelamput
2. Entfernan Sie alle
Leuchst
fern
vorhanden
2. Ver
rescenti
en indien aanwezig
2. Retir
rescentes de
las luminarias
2. Retirez t existants de luminaire
rescents
2. Remova todos os tubos rescentes existentes nas
luminárias
2. Smontare tutti
rescenti
eventualmente presenti negli
apparecci di illuminazione
Aura Light AB, Box 8, 598 21 Vimmerby, Sweden, Phone + 46 (0) 20 32 30 30 [email protected], www.auralight.com
3. Install Aura OptiT8 HF Long Life
LED retr
re the position
by turning the lamp by 90°
3. Installera Aura OptiT8 HF Long Life
LED retr
ra positionen genom
att vrida ljuskällan 90°
3. Installer Aura OptiT8 HF Long Life LED retr øret re posisjon ved å vri på røret 90°
3. Monter Aura OptiT8 HF Long Life LED retr ysstofrør re positionen ved at dreje lyskilden 90°
3. Asenne Aura OptiT8 HF Long Life
retr t
varmista asennus
kääntämällä lamppua 90°
3. Setzen Sie die Aura OptiT8 HF Long Lif Röhre ein und drehen si die
retiert.
3. Installeer de Aura OptiT8 HF Long Life retr htbron. Stel de positie van de lamp in door deze 90° te draaien.
3. Instale el tubo tipo retr
ra
OptiT8 HF Long Life LED. Asegurar la
posición girando la lâmpada 90°.
3. Installez le tube Aura OptiT8 HF LED Retr et sécurisez sa position par une rotation á 90°.
3. Instale a lâmpada LED retr
ra
OPTIT8 HF Long Lif
sua posiçâo á 90°.
3. Installare il tubo retr
ra
OptiT8 HF Long Lif re la posizione
rutando la lampada di 90°.
4. Turn on the power 4. Sätt på strömmen 4. Slå på strømmen 4. Tænd for spændingen 4. Kytke virta pällä 4. Schalten Sie das Licht ein 4. Schakel de stroom in 4. Conecte la corriente 4. Mettez le luminaire sous tension 4. Ligue a corrente 4. Portare l´interuttore su ON
Hållbar & innovativ belysning | Aura Light International | Aura Light
