National Instruments Pxi-2532b High-density Multiconfiguration Matrix Switch Module Owner's Manual

AW Apex Waves

COMPREHENSIVE SERVICES

We offer competitive repair and calibration services, as well as easily accessible documentation and free downloadable resources.

SELL YOUR SURPLUS

We buy new, used, decommissioned, and surplus parts from every NI series.
We work out the best solution to suit your individual needs.

Wave point Sell For Cash Wave point Get Credit Wave point Receive a Trade-In Deal

OBSOLETE NI HARDWARE IN STOCK & READY TO SHIP

We stock New, New Surplus, Refurbished, and Reconditioned NI Hardware.

Bridging the gap between the manufacturer and your legacy test system.

telephone 1-800-915-6216
Websitewww.apexwaves.com
E-mail  [email protected]

All trademarks, brands, and brand names are the property of their respective owners.

Request a Quote Message1 CLICK HERE PXIe-2532B

NATIONAL INSTRUMENTS logoLetter of Volatility
PXI/PXIe-2531/32/32B

Manufacturer: National Instruments

Board Assembly Part Numbers (Refer to Procedure 1 for identification procedure):

Part Number and RevisionDescription
199391A-01L or laterPXI-2531 
190982A-01 or later PXI-2532 
153874A-01L or later PXI-2532B 
150040A-01L or later PXIe-2531 
198534A-01 or later PXIe-2532 
153875A-01L or laterPXIe-2532B 
Volatile Memory

Target Data 

TypeSizeBattery BackupUser1 AccessibleSystem AccessibleSanitization Procedure
Relay scanlists SRAM128 KBNoNoYes

Cycle Power 

Relay counts, states 

FPGA Block RAM150 KB NoNoYes

Cycle Power 

Non-Volatile Memory (incl. Media Storage)
Target Data 

Type

SizeBattery BackupUser1 AccessibleSystem Accessible

Sanitization Procedure

Device configuration

Flash

No

• PCI configuration data, and serial number4MbNoYes

None 

• Relay module config, and relay cycle counts4MbNoYes

None 

Relay drivers

CPLD

128 Macrocells NoNoYes

None 

_______________________

¹ Refer to Terms and Definitions section for clarification of User and System Accessible

Procedures

Procedure 1 -­Board Assembly Part Number Identification:
To determine the Board Assembly Part Number and Revision, refer to the label applied to the surface of your product. The Assembly Part Number should be formatted as “P/N: ######A-##L

Terms and Definitions

Cycle Power:
The process of completely removing power from the device and its components and allowing for adequate discharge. This process includes a complete shutdown of the PC and/or chassis containing the device; a reboot is not sufficient for the completion of this process.

Volatile Memory:
Requires power to maintain the stored information. When power is removed from this memory, its contents are lost. This type of memory typically contains application specific data such as capture waveforms.

Non-Volatile Memory:
Power is not required to maintain the stored information. Device retains its contents when power is removed. This type of memory typically contains information necessary to boot, configure, or calibrate the product or may include device power up states.

User Accessible:
The component is read and/or write addressable such that a user can store arbitrary information to the component from the host using a publicly distributed NI tool, such as a Driver API, the System Configuration API, or MAX.

System Accessible:
The component is read and/or write addressable from the host without the need to physically alter the product.

Clearing:
Per NIST Special Publication 800-88 Revision 1, “clearing” is a logical technique to sanitize data in all User Accessible storage locations for protection against simple non-invasive data recovery techniques using the same interface available to the user; typically applied through the standard read and write commands to the storage device.

Sanitization:
Per NIST Special Publication 800-88 Revision 1, “sanitization” is a process to render access to “Target Data” on the media infeasible for a given level of effort. In this document, clearing is the degree of sanitization described.

March 2017
376514B-01 Rev 002

This document is subject to change without notice.
For the most recent version, visit ni.com/manuals.

Contact: 866-275-6964
[email protected]

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals