Spypoint Flex Wildlife Cellular Trail Camera User Guide (+ PDF)

Contents hide

1 SPYPOINT FLEX Wildlife Cellular Trail Camera

2 IN THE BOX

3 BEFORE YOU GO TO THE FIELD

9 Documents / Resources

9.1 References

10 Related Posts

SPYPOINT FLEX Wildlife Cellular Trail Camera

IN THE BOX

FLEX Camera
Antenna
2 SIM cards preactivated and inserted (do not remove) Installation strap

BEFORE YOU GO TO THE FIELD

Download the SPYPOINT application|
Using App Store or Google Play Store

Create an account & activate your camera by following the onscreen instructions.

Screw in antenna & insertmemory card, batteries.
Insert the tray following the arrow orientation.

Turn your camera ON.

All LEDs will begin to blink.

Format your memory card.
Immediately hold the format button for 5 s. FORMAT LED will turn green.

Press the TEST button to receive a photo.

Turn your camera OFF until you’re ready to install it in field.

Install your camera.
Tips
Use: Installation strap Orientation : North or South Height : Subject’s mid-body Lens sight : No leaves, branches or tall grass in front.

COMPONENTS

Microphone
IR LED
Light sensor
Delay light
Photo lens
Detection lens
Battery level
Signal level
STATUS light
FORMAT button
TEST button
OFF/ON switch
Antenna 12 V jack
Cable lock hole
Locking latch
Slots for installation strap
Screw-thread for standard
-20 tripod mount
Battery door
microSD card slot
Micro SIM card slots
Battery tray

DISPOSAL

Only use original spare parts and accessories. Only use original spare parts and accessories. If, one day, your camera has been used so intensively that it has to be replaced, or if you no longer have any use for it, you are obliged to dispose of it at a recycling center. Information on return points for your electrical appliance can be obtained from your local waste disposal company or from your local administrative offices. Electrical appliances not only contain valuable recyclable raw materials, but also substances which, if disposed of improperly, can affect public health and the environment. Help ensure that valuable raw materials are recycled by returning your old appliance to a central collection point. The WEEE (Waste Electrical and Electronic Equipment Directive) symbol represents the obligation.

FREQUENCY

Details available on the FLEX help web page (spypoint.info/en/support-2/product-support/flex)

FCC

Operation is subject to the following two conditions :

This device must not cause harmful interference ;
This device must accept any interference received, including interference that may cause undesired operation.