Rain Harvesting Hw1902 Sliding Gate Valves Plastic Paddle User Guide

HW1902 Sliding Gate Valves Plastic Paddle

Product Information: Sliding Gate Valves – Plastic
Paddle

This sliding gate valve with a plastic paddle is a simple and
easy-to-use product that allows you to drain charged lines
effectively. It is designed for installation in both vertical and
horizontal positions. The product is available in different sizes
and countries. The codes for each size and country are as
follows:

Product Usage Instructions: Sliding Gate Valves – Plastic
Paddle

1. Select your desired installation point. The sliding gate valve
   can be installed vertically or horizontally.
2. Measure and remove a 35mm section of pipe at the chosen
   installation point. Ensure that all cut edges are clean and
   smooth.
3. Use priming fluid to clean the inside sockets of the sliding
   gate valve and the outside of the pipes that will be glued to the
   valve.
4. Apply solvent weld glue to the inside sockets of the sliding
   gate valve and the outside of the pipes. Bring them together and
   ensure that the pipes are fully inserted into the sockets of the
   sliding gate valve. Hold for a minimum of 60 seconds or until
   secure.

For more information or assistance, you can contact us at
+61 7 3248 9600 or visit our website
at rainharvesting.com.

Sliding Gate Valves
Plastic Paddle

Installation and Specification Guide

PRODUCT DETAILS
This simple to use sliding gate valve with a plastic paddle allows you to easily drain charged lines.

Code
HW1902 HW5902 HW3902 HW0902 HW0921

Size
3″ 68mm 80mm 90mm 100m

Country
USA UK SA
AU/Other Countries

rainharvesting.com

Installation
WHAT’S IN THE BOX?
Sliding Gate Valve

TOOLS/MATERIALS YOU MAY REQUIRE
Marker Pen Tape Measure Saw Solvent weld glue Priming fluid

SLIDING GATE VALVES – PLASTIC PADDLE
1 – Select your desired installation point. The Sliding Gate Valve can be installed in the vertical or horizontal position.
2 – Measure and remove a 35mm section of pipe at your desired installation point. Ensure all cut edges are clean and smooth.
3 – Use priming fluid to clean inside the sockets of the Sliding Gate Valve and outside of the pipes you will be gluing the valve to.
4 – Apply solvent weld glue first to inside the sockets of the Sliding Gate Valve and then to the outside of the pipes, bring together and ensure pipes are inserted fully into the sockets of the Sliding Gate Valve. Hold for a minimum of 60 seconds or until secure.

rainharvesting.com

Product Specifications

Sliding Gate Valves Plastic Paddle
A
A

B

C A

C A

B

D

D

E

E

COUNTRY

90mm & below
Dimensions & Pipe Fittings

100mm

CODE

A

B

C

D

USA

HW1902

3″ SCH40 F

5.09″

4.37″

14.17″

UK

HW5902

68 F

135

111

360

SA

HW3902

80 F

140

111

360

AU/Other Countries

HW0902 HW0921

90 F 100 F

91

111

360

136

170

460

All dimensions are in mm unless otherwise stated.
Fitting guide: F = Female / Socket Fitting M = Male / Spigot Fitting (Pipe size) IP = In-Pipe Fitting

rainharvesting.com

E 10.20″
259 259 259 331

SPECIFICATIONS

Pressure Ratings
HW1902

Size 3″

HW5902

68mm

HW3902

80mm

HW0902

90mm

HW0921

100mm DWV

Paddle Type Plastic Paddle Plastic Paddle Plastic Paddle Plastic Paddle Plastic Paddle

Max Pressure (kPa)
210

Mid Flow Max Crossing Pressure (kPa)
5

210

5

210

5

210

5

210

5

A common misconception about collecting rainwater is that all you need is a roof, a tank and some rain. This `tanking’ approach cannot always be relied on to deliver the volume ­ or quality ­ of water that you require. That is where we can help.
With some thought, your rain harvesting system can provide you with cleaner water and lots of it. Whether you’re completely reliant on tank water or wanting to keep the garden green, our simple steps will help you achieve your goal.
The Rain Harvesting approach to rainwater collection involves using tested and proven products to make quality rainwater available for use in and around your property. You don’t need much to get started and you will be surprised how easy it is to get the most out of your rainwater system.
How can we help you?
DISCLAIMER This product specification is not a complete guide to product usage. Further information is available from Rain Harvesting Pty Ltd and from the Installation and Operating Instructions. This specification sheet must be read in conjunction with the Installation and Operating Instructions and all applicable statutory requirement. Product specifications may change without notice. © Rain Harvesting Pty Ltd
rainharvesting.com

For more information or to find out how we can help, just give us a call on
+61 7 3248 9600
Or visit our website at
rainharvesting.com

References

• Cleaner Water. More of it. | Rain Harvesting by BMCo US
• Supported by Rain Harvesting | Blue Mountain Co - Rain Harvesting