PCDZ136MBK and PCDZ136SGD Chandelier Ceiling Light
Product Information
This installation guide is for two models, PCDZ136MBK and
PCDZ136SGD. Both models have a wattage of 32W and operate on
120Vac, 60Hz. The package includes a ceiling canopy, 12L rods,
coupling, cage, swivel assembly, mounting hardware, fixture body,
inner backplate, mounting screw, P3 wire connector, outlet box
screw, wall anchor, screw, and washer.
Safety Information
The product was released on March 16, 2022. Please ensure that
you follow the instructions carefully to avoid any accidents or
injuries during installation.
Care and Maintenance
If you need further assistance with the product, you can call
Quoizel Customer Care at 1-800-645-3184 between 9:00am – 5:00pm
EST, or visit their website at www.quoizel.com.
Product Usage Instructions
Installation
- Install Fixture Body to Cage.
- Install Rods. For an 8 feet ceiling, use (2) 12L rods on each
side. For a 9 feet ceiling, use (2) 6L rods + (2) 12L rods on each
side. - Separate Swivel Assembly.
- Install Swivels and Ceiling Canopy to Upper Rods.
- Connect Fixture Wires to Driver. Connect the red wire from the
driver identified with the label LED+ to the red wire from the
fixture identified with the label LED+. Connect the black wire from
the driver identified with the label LED- to the black wire from
the fixture identified with the label LED-. - Install Inner Backplate. Mark the outlet box on the ceiling
from slot hole and drill a 1/4 inch hole for wall anchor. - Install Lanyards.
- Wiring. Connect the white wire from the supply to the white
wire from the driver. Connect the black (or red) wire from the
supply to the black wire from the driver. Connect the ground wire
from the supply to the ground wire from the fixture using a green
ground screw. - Install Ceiling Canopy to Inner Backplate.
After installation, restore electricity and keep this sheet for
future reference.
INSTALLATION GUIDE FOR PCDZ136MBK and PCDZ136SGD
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, install or operate the product. WARNING · RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the
circuit breaker box or the main fuse box. CAUTION · For your safety, read instructions completely before beginning installation. · If in doubt about electrical installation, consult a licensed electrician. TOOLS REQUIRED
Released Date: 2022-03-16
Ratings
120Vac, 60Hz Model No.
PCDZ136MBK PCDZ136SGD
Wattage 32W 32W
CARE AND MAINTENANCE
· Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am – 5:00pm EST), or visit us on-line at www.quoizel.com.
PACKAGE CONTENTS
Ceiling Canopy A x1
C
12″L Rod x4
E
Coupling x 2
F
Cage x 1
Swivel Assembly A x2
MOUNTING HARDWARE
6″L Rod D x4
G
Fixture Body x 1
Inner Backplate AA x 1
Mounting Screw BB x 4
CC
P3 Wire Connector x 5
DD
Outlet Box Screw x 2
EE
Wall Anchor x 2
FF
Screw x 2
GG
Washer x 2
– 1 of 3 –
INSTALLATION
1 Install Fixture Body to Cage
2 Install Rods
Optional Rods:
8 Feet Ceiling: (2) 12″L Rods each side. 9 Feet Ceiling: (2) 6″L Rods + (2) 12″L Rods each side.
3 Separate Swivel Assembly
4
Install Swivels and Ceiling Canopy to Upper Rods
5 Connect Fixture Wires to Driver
Red wire from driver identified with
the label “LED +”
Red wire from fixture identified with
the label “LED +”
Black wire from driver identified with
the label “LED -”
Black wire from fixture identified with
the label “LED -”
90Degree
Swivel
For angled ceilings, Swivels opening towards wall.
* Make sure two swivels opening are in the same direction while assembling.
6 Install Inner Backplate
CEILING
Outlet Box Mark on the ceiling from slot hole and drill 1/4″ hole for wall anchor.
Slot Hole
– 2 of 3 –
INSTALLATION
7 Install Lanyards
8 Wiring
Button Stop
Lanyard Lanyard
9 Install Ceiling Canopy to Inner Backplate
White wire from supply Black (or red) wire from supply
White from driver Black from driver
Ground wire from supply
Ground wire from fixture
Green ground screw
Your installation is now complete! Restore electricity and save this sheet for future reference.
– 3 of 3 –
Quoizel | Artisans In Lighting
