Azoteq Iqs323ev02 Iq Switch Proxfusion Series User Guide

IQS323EV02 IQ Switch ProxFusion Series
User Guide

IQ Switch^®– ProxFusion^® Series

List of Contents

• 1 x Touch Slider Module
• 1 x Touch Buttons Module
• 1 x L-Sense (Inductive Sensing) Module
• 10 x IQS323 IC’s
• 1 x CT210A
• 1 x Ribbon Cable
• 1 x Piece of Perspex with Conductive Tape
• 1 x Complimentary USB Flash Drive
  (Please Note: USB flash drive not included in all kits)

IQS323EV02 Setup

• Plug the module into the CT210A via ribbon cable
• Connect the CT210A to the PC
• Download and install the IQS323 GUI from Azoteq’s website
• Run the GUI
• Click “START STREAMING”
• Click “USER SETTINGS”
• Click “EVKit Modules”
• Select the relevant kit
• Minimise the “Settings” pop-up window
• Evaluate the module
• The LED turns on when a Touch event occurs

Contact Information

Visit www.azoteq.com for a list of distributors and worldwide representation.

Patents as listed on www.azoteq.com/patents-trademarks/ may relate to the device or usage of the device. Azoteq^®, Crystal Driver^®, IQ Switch^®, ProxSense^®, ProxFusion™, LightSense™, SwipeSwitch , and the logo are trademarks of Azoteq.
The information in this Datasheet is believed to be accurate at the time of publication. Azoteq uses reasonable effort to maintain the information up-to-date and accurate, but does not warrant the accuracy, completeness or reliability of the information contained herein. All content and information are provided on an “as is” basis only, without any representations or warranties, express or implied, of any kind, including representations about the suitability of these products or information for any purpose. Azoteq disclaims all warranties and conditions with regard to these products and information, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property rights. Azoteq assumes no liability for any damages or injury arising from any use of the information or the product or caused by, without limitation, failure of performance, error, omission, interruption, defect, delay in operation or transmission, even if Azoteq has been advised of the possibility of such damages. The applications mentioned herein are used solely for the purpose of illustration and Azoteq makes no warranty or representation that such applications will be suitable without further modification, nor recommends the use of its products for application that may present a risk to human life due to malfunction or otherwise. Azoteq products are not authorized for use as critical components in life support devices or systems. No licenses to patents are granted, implicitly, express or implied, by estoppel or otherwise, under any intellectual property rights. In the event that any of the abovementioned limitations or exclusions does not apply, it is agreed that Azoteq’s total liability for all losses, damages and causes of action (in contract, tort (including without limitation, negligence) or otherwise) will not exceed the amount already paid by the customer for the products. Azoteq reserves the right to alter its products, to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and information, its products, programs and services at any time or to move or discontinue any contents, products, programs or services without prior notification. For the most up-to-date information and binding Terms and Conditions please refer to www.azoteq.com.

Copyright © Azoteq 2022
All Rights Reserved
IQS323EV02 Quick Start Guide
Revision v1.0
October 2022
[email protected]

References

• Azoteq • Fabless Semiconductor Company & Pioneer in Sensor Fusion
• Patents & Trademarks • Azoteq
• Azoteq • Fabless Semiconductor Company & Pioneer in Sensor Fusion
• Patents & Trademarks • Azoteq
• Azoteq IQS323 • Azoteq