Asus Rog Fusion Ii 300 Gaming Headset User Guide (+ PDF)

ASUS ROG FUSION II 300 Gaming Headset

Contents hide

1 Package contents

2 System requirements

3 Product Overview

4 Getting started

5 Notices

5.1 Federal Communications Commission Statement

6 Limitation of Liability

7 REACH

8 Simplified UKCA Declaration of Conformity

9 ASUS Recycling/Takeback Services

10 FCC COMPLIANCE INFORMATION

11 Documents / Resources

11.1 References

12 Related Posts

Package contents

1 x ROG Fusion II 300 gaming headset
1 x Pair of ROG Hybrid ear cushions
1 x USB-C® to USB-A adapter dongle
1 x Quick Start Guide
1 x Warranty Notice

System requirements

Windows® 10 / Windows® 8.1 / Windows® 7
Internet connection (for downloading optional software)
USB-A or USB-C® port

Product Overview

A. Changeable ear cushion
B. Microphone on/off
C. Audio control wheel Roll to control the volume Press to turn on/off the virtual 7.1 surround sound
D. Virtual 7.1 surround sound LED indicator
The LED indicator turns solid red when the 7.1 virtual surround sound is on

Getting started

To set up your ROG Fusion II 300 gaming headset:

Connect the headset to your device through the USB-C® connector or the USB-C® to USB-A adapter.
Download the Armoury software from https://rog.asus.com/ and then install it on your computer.

Notices

Federal Communications Commission Statement

This device has been tested and found to comply with the limits for a Class B device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

CAUTION! Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.

Canada, Industry Canada (IC) Notices
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Limitation of Liability

Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.

REACH

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm

	DO NOT throw this product in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
	DO NOT throw this product in fire. DO NOT short circuit the contacts. DO NOT disassemble this product.

Simplified UKCA Declaration of Conformity

ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 (S.I. 2017/1206). Full text of UKCA declaration of conformity is available at https://www.asus.com/support/.

ASUS Recycling/Takeback Services

KC: Korea Warning Statement

CE Marking

This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

RED
“Hereby, ASUSTeK CCOMPUTER INC. declares that this headset is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. ”

Authorized representative in United Kingdom : ASUSTEK (UK) LIMITED
Address: 1st Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M 6BL, England, United Kingdom

FCC COMPLIANCE INFORMATION

Per FCC Part 2 Section 2.1077

Responsible Party: Asus Computer International
Address: 48720 Kato Rd., Fremont, CA 94538, USA
Phone/Fax No: (510)739-3777/(510)608-4555

hereby declares that the product

Product Name : ROG Fusion II 300
Model Number : ROG Fusion II 300

compliance statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.