Smart VPN Client
Product Information
Product Name: SmartVPN Client
Model Number: AP1101-2 V.1
Firmware Version: 5.6.1
Release Type: Normal
Supported Operating Systems: Windows XP SP3, Vista
32-bit/64-bit, Windows 7 32-bit/64-bit, Windows 8, Windows 10,
Windows 11, Windows Server 2012 R2
Supported VPN Schemas: PPTP, L2TP, IPSec, OpenVPN, WireGuard
VPN, and DrayTek SSL Tunnel
Product Usage Instructions
The SmartVPN Client is a VPN configuration utility that makes
VPN configuration easy for users. Follow the steps below to use the
SmartVPN Client:
- Download and install the SmartVPN Client on your supported
operating system. - Launch the SmartVPN Client application.
- Select the desired VPN schema from the available options (PPTP,
L2TP, IPSec, OpenVPN, WireGuard VPN, or DrayTek SSL Tunnel). - Enter the necessary VPN configuration details, such as server
address, username, password, and any other required
parameters. - If using SSLVPN, ensure that your server certificate is
verified and supported by Let’s Encrypt. - If using a battery-powered computer, make sure to connect to a
power source or be aware of any battery warnings while connecting
to the VPN. - For IPsec & L2TP over IPsec profiles, enter the pre-shared
key when prompted. - If using mOTP (mobile One-Time Password) authentication, ensure
that the username and PIN code are entered correctly. - Import any WireGuard VPN configurations if needed.
- Check for any known issues or improvements mentioned in the
release notes and take necessary actions accordingly.
Note: If you encounter any issues or errors, refer to the user
manual or contact customer support for assistance.
NO:AP1101-2 V.1
Release Note for SmartVPN Client
Firmware Version: Release Type: Applied Operation System
5.6.1 Normal Windows XP SP3, Vista 32-bit/64-bit, Windows 7 32-bit/64-bit, Windows 8, Windows 10, Windows 11, Windows Server 2012 R2
The Smart VPN Client is a VPN configuration utility. It makes VPN configuration easy for users. It could support the following VPN schemas, PPTP, L2TP, IPSec, OpenVPN, WireGuard VPN and DrayTek SSL Tunnel.
New Features
Support SSLVPN with TLS 1.3.
Improvement
Improved: Improve the long-time WireGuard VPN stability. Improved: Restrict VPN 2FA TOTP input field to 6 characters. Improved: SSLVPN can be used for verifying the Let’s Encrypt server certificate. Improved: Add a battery warning message when connecting the VPN with the
battery-powered computer. Improved: Show a notification message when the user doesn’t enter pre-shared key in
IPsec & L2TP over IPsec profile. Corrected: An issue of tab order in username & PIN code input dialog (mOTP). Corrected: An issue with page arrangement for mOTP configuration. Corrected: An issue with SSL VPN 2FA authentication when SSLVPN disconnected. Corrected: An issue with the pre-shared key not persisting after switching the VPN type. Corrected: An issue with IP (0.0.0.0/x) not allowed when importing a WireGuard VPN
config. Corrected: An issue about SmartVPN Client icon in system tray disappeared after
explore.exe crashed. Corrected: An issue that Vigor router disconnected VPN automatically if Ping to
Keepalive failed three times in a row.
Known Issue
SmartVPN Client will possibly pop up an error “Hardware failure in port or attached device.” if a user tries to reconnect SSL VPN after a long-time performance test with SSL VPN.
RD NO: 111_08_03
