Adesso Bluetooth 3.0 Waterproof Speaker – Retail Packaging
Specifications
- BRAND: Adesso
- MODEL NAME: Xtream S1P
- CONNECTIVITY TECHNOLOGY: Bluetooth, USB
- SPECIAL FEATURE: Waterproof, Built-in-microphone
- RECOMMENDED USES FOR PRODUCT: Music
- RANGE: 30′ feet
- WATERPROOF: IPX-6
- PLAY TIME: 7 hours
- STAND-BY TIME: 800 hours
- CONNECTION: Bluetooth 3.0
- BLUETOOTH PROTOCOLS: AVRCP, HSP, HFP
- MICROPHONE TYPE: Omnidirectional
- FREQUENCY RESPONSE: 150HZ 20kHz
- BATTERY: Rechargeable 1200mAH Li-polymer battery
- CHARGING TIME: 5 hours
Introduction
Music is portable with the Adesso Xtream S1 Bluetooth Waterproof Speaker! Adesso Xtream S1 produces great audio sound with rich loudness and superb treble and is small enough to fit in your pocket or backpack. With the Adesso Xtream S1, you can take your music with you everywhere you go and listen to it while showering, swimming, hiking, or anyplace else! An additional option to make hands-free phone calls is provided via the integrated Bluetooth microphone. Additionally, it is resistant to shock and dust, providing weather protection. Each device has a removable suction cup that allows you to attach it to a window or bathroom wall.
You can now experience even fuller, bolder, and louder sounds (and answer calls with a push of a button) thanks to a brand-new modern design with 5 colorful colors to select from.
HOW IT WORKS
The drivers, crossovers, and cabinet are the three primary parts of a pair of Bluetooth waterproof speakers. Different sound pitches are produced by the drivers by the mechanical energy they create from electrical energy.
HOW TO KNOW IF SPEAKER IS FULLY CHARGED
The built-in lithium ion battery is fully charged if the CHARGE indication remains off when the speaker power is off and connected to an AC outlet. Even if the speaker is kept plugged into an AC outlet, the battery won’t be able to be charged any further after it has reached its maximum capacity.
HOW TO FIX A BLUETOOTH SPEAKER BATTERY
Turn the Bluetooth speaker’s bottom downwards, remove the anti-slip mat, reveal the maintained screw, remove and unscrew it, and then heat the battery on the audio motherboard with a soldering iron until it falls off. Finally, solder fresh wires and complementary plugs together.
HOW TO FIX A BLUETOOTH SPEAKER THAT WON’T TURN ON
- Check to see if your speaker has enough power.
- Make sure the USB AC adapter is firmly (not loosely) attached to the speaker and the wall outlet.
- Hold down the power button while waiting for the speaker to start up.
Frequently Asked Questions
The normal battery life range is between 6 and 20 hours. This differs from model to model, of course. In terms of their batteries, audio devices will lose battery life while using Bluetooth audio communication.
It takes 30 minutes to fully recharge your Ultimate Ears Speaker. With the majority of USB chargers, Wonderboom may also be charged, albeit charging periods will vary depending on the power of the USB charger you use. If the micro-USB port, charging cable, or connectors are wet, unclean, or broken, never charge your Ultimate Ears Speaker.
Of course, a Bluetooth speaker needs a built-in battery to be portable. A portable speaker’s battery life typically lasts between 6 and 12 hours, while some can go up to 24 hours.
Modern batteries have sophisticated sensors that prevent overcharging, but this does not guarantee that leaving the battery hooked into the charger won’t harm it. One charging cycle is finished when a battery is fully charged; a battery can only be fully charged a certain number of times before it is irreparably harmed.
Yes. When your Bluetooth speaker is charging, everything is good, and using it won’t harm the battery. After its initial charge, the speaker need to function flawlessly whilst charging.
The Bluetooth speaker’s battery life varies based on the model and the company who made it. A speaker should typically operate for ten to twenty hours after a full charge. A full charge may only be good for a few hours of use on smaller Bluetooth speakers.
Yes, you can overcharge it because it will stop charging when the battery is at 100%.
Installing software updates, replacing the battery, purchasing a new cable, repairing a fractured solder joint, replacing the charging port, and replacing the charging circuit are all necessary fixes for a Bluetooth speaker that won’t charge.
The charging process for speakers using AC mains power typically takes 6 to 8 hours. A USB-charged speaker will take about 3–4 hours to completely charge.
Brass, aluminum, or stainless steel are the materials used by manufacturers of weatherproof equipment. Indoor speakers contain paper diaphragms in the drivers, which are more susceptible to humidity than weatherproof speakers, which use mylar diaphragms.
