iTrans E90U8K 8K HDMI and USB Over HDBaseT Extender
Product Information
The iTrans E90U8K is an 8K HDMI & USB over HDBaseT Extender.
It is HDMI 2.1, HDCP 2.3, and HDBaseT 3.0 compliant, supporting up
to 40Gbps FRL and 18Gbps TMDS video bandwidth. The extender can
transmit video resolutions up to 8K@30 4:4:4 10bit and 4K@120Hz
4:4:4 10bit, and it supports all industry standard video
resolutions including VGA-WUXGA and 480i-8K30. It also supports
VRR, FVA, ALLM, HDR, HDR10, HDR10+, Dolby Vision, and HLG
pass-through.
The extender is equipped with advanced features such as HDMI
audio formats support including Dolby Atmos, Dolby TrueHD, Dolby
Digital Plus, and DTS-HD Master Audio. It can extend the signal
transmission distance up to 90m/295ft via a single CAT 6A/7 cable.
The extender also supports eARC/ARC from RX to TX sound system and
features advanced EDID management through EDID DIP switch.
In addition to video and audio transmission, the extender
supports USB2.0 transmission with speeds up to 350Mbps. It provides
bi-directional Ethernet (1Gb), analog audio, IR, and RS-232 signal
pass-through. The extender also features HDMI re-clocking on the
HDBaseT Receiver to help solve HDMI HDCP, compatibility, and
handshaking issues. It has a bi-directional 24V POC (Power over
Cable) function.
Product Usage Instructions
- Before connecting, operating, or adjusting the product,
carefully read the user manual for optimum performance and
safety. - Use a surge protection device to protect the sensitive
electrical components of the product from electrical spikes,
surges, electric shock, lightning strikes, etc. - Package Contents:
- 1 x HDBaseT Extender (Transmitter)
- 1 x HDBaseT Extender (Receiver)
- 1 x IR Blaster Cable (1.5 meters)
- 1 x IR Wideband Receiver Cable (1.5 meters)
- 2 x 3pin-3.81mm Phoenix Connectors
- 4 x Mounting Ears
- 8 x Machine Screws (KM3*4)
- 8 x Rubber Feet
- 1 x 24V/1A Locking Power Supply
- 1 x User Manual
- Specifications:
- HDMI Compliance: HDMI 2.1
- HDCP Compliance: HDCP 2.3
- Video Bandwidth: Up to 40Gbps FRL and 18Gbps TMDS
- Video Resolution: Up to 8K@30 4:4:4 10bit, 4K@120Hz 4:4:4
10bit - USB Bandwidth: Up to 350Mbps
- HDR: HDR, HDR10, HDR10+, Dolby Vision, HLG
- Color Space: RGB 4:4:4, YCbCr 4:4:4 / 4:2:2, YCbCr 4:2:0
- Color Depth: 8/10/12-bit
- Audio Formats: HDMI – PCM2.0, LPCM5.1, LPCM7.1, Dolby Digital,
Dolby Digital plus, Dolby TrueHD, Dolby Atmos, DTS Surround, DTS
Express, DTS-HD HRA, DTS HD Master, DTS:X; Analog – PCM 2.0
48K - IR Level: 5Vp-p/12Vp-p
- IR Bandwidth: 20K – 60KHz
- Transmission Distance: MAX – CAT6–60m/197ft,
CAT6A/7–90m/295ft - ESD Protection: Yes
- Connection:
- Transmitter:
- Input: 1 x HDMI IN [Type A, 19-pin female], 1 x AUDIO IN [3.5mm
Stereo Mini-jack] - Output: 1 x HDMI OUT [Type A, 19-pin female], 1 x HDBT OUT
[RJ45, 8-pin female], 1 x AUDIO OUT [3.5mm Stereo Mini-jack] - Control: 1 x IR IN [3.5mm Stereo Mini-jack], 1 x IR OUT [3.5mm
Stereo Mini-jack], 1 x RS-232 [3pin-3.81mm Phoenix jack], 1 x USB
HOST [USB Type B], 3 x USB DEVICE [USB Type A], 1 x ETHERNET
[RJ45]
- Input: 1 x HDMI IN [Type A, 19-pin female], 1 x AUDIO IN [3.5mm
- Receiver:
- Input: 1 x HDMI IN [Type A, 19-pin female], 1 x HDBT IN [RJ45,
8-pin female], 1 x AUDIO IN [3.5mm Stereo Mini-jack]
- Input: 1 x HDMI IN [Type A, 19-pin female], 1 x HDBT IN [RJ45,
- Transmitter:
iTrans E90U8K
8K HDMI & USB over HDBaseT Extender
VER 1.0
www.infobitav.com [email protected]
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.
Table of Contents
1. Introduction………………………………………………………………………………..1 2. Features……………………………………………………………………………………..1 3. Package Contents…………………………………………………………………….. 2 4. Specifications……………………………………………………………………………. 2 5. Operation Controls and Functions……………………………………………… 4
5.1 Transmitter Panel………………………………………………………………….. 4 5.2 Receiver Panel…………………………………………………………………….. 7 5.3 USB Mode Applications………………………………………………………… 10 5.4 IR Pin Definition…………………………………………………………………….. 11 6. Application Example…………………………………………………………………. 12
1. Introduction
This 8K HDMI & USB over HDBaseT Extender can extend uncompressed HD/UHD video and audio signals, eARC/ARC, RS-232, bi-directional IR, 1GbE Ethernet and USB2.0 signals up to 90m/295ft via a single CAT6A/7 cable. Video resolution is up to 8K@30 4:4:4 10bit, 4K@120Hz 4:4:4 10bit, 4K60Hz 4:4:4. It supports eARC/ARC from RX’s HDMI output pass-through to TX’s HDMI input or de-embedding to TX’s HDMI output port. Besides, it supports USB 2.0 signal transmission (Host/Device is configurable) and bidirectional POC function. The Extender offers the most convenient solution for HDMI extension via a single CAT cable with long distance capability, and is the perfect solution for home/commercial application.
2. Features
HDMI 2.1, HDCP 2.3 and HDBaseT 3.0 compliant Support up to 40Gbps FRL and 18Gbps TMDS video bandwidth Video resolution is up to 8K@30 4:4:4 10bit, 4K@120Hz 4:4:4 10bit Support all industry standard video resolutions including VGA-WUXGA
and 480i-8K30 VRR, FVA, ALLM support HDR, HDR10, HDR10+, Dolby Vision and HLG pass-through HDMI audio formats: Dolby Atmos, Dolby TrueHD, Dolby Digital Plus and
DTS-HD Master Audio Signal transmission distance can be extended up to 90m/295ft via a single
CAT 6A/7 cable Support eARC/ARC from RX to TX sound system Advanced EDID management through EDID DIP switch With CONFIG DIP switch, allowing the RS-232 serial port to feature
different functions Support USB2.0 transmission (with speeds up to 350Mbps), Host/Device
is configurable Bi-directional Ethernet (1Gb), analog audio, IR & RS-232 signal
pass-through HDMI re-clocking on the HDBaseTTM Receiver to help solve HDMI HDCP,
compatibility and handshaking issues Bi-directional 24V POC function
1 / 13
3. Package Contents
1 x HDBaseT Extender (Transmitter) 1 x HDBaseT Extender (Receiver) 1 x IR Blaster Cable (1.5 meters) 1 x IR Wideband Receiver Cable (1.5 meters) 2 x 3pin-3.81mm Phoenix Connectors 4 x Mounting Ears 8 x Machine Screws (KM3*4) 8 x Rubber Feet 1 x 24V/1A Locking Power Supply 1 x User Manual
4. Specifications
Technical HDMI Compliance HDCP Compliance Video Bandwidth Video Resolution USB Bandwidth HDR Color Space Color Depth
Audio Formats
IR Level IR Bandwidth Transmission Distance ESD Protection
HDMI 2.1 HDCP 2.3 Up to 40Gbps FRL and 18Gbps TMDS Up to 8K@30 4:4:4 10bit, 4K@120Hz 4:4:4 10bit Up to 350Mbps HDR, HDR10, HDR10+, Dolby Vision, HLG RGB 4:4:4, YCbCr 4:4:4 / 4:2:2, YCbCr 4:2:0 8/10/12-bit
HDMI: PCM2.0, LPCM5.1, LPCM7.1, (32K/44.1K/48K/88.2K/96K/176.4K/192K)(16/20/24); Dolby Digital, Dolby Digital plus, Dolby TrueHD, Dolby Atmos; DTS Surround, 96/24, ES, DTS Express, DTS-HD HRA, DTS HD Master, DTS:X Analog: PCM 2.0 48K
5Vp-p/12Vp-p
20K – 60KHz
MAX: CAT6–60m/197ft CAT6A/7–90m/295ft
Human body model — ±8kV (Air-gap discharge) & ±4kV (Contact discharge)
2 / 13
Connection
Transmitter
Input: 1 x HDMI IN [Type A, 19-pin female] 1 x AUDIO IN [3.5mm Stereo Mini-jack] Output: 1 x HDMI OUT [Type A, 19-pin female] 1 x HDBT OUT [RJ45, 8-pin female] 1 x AUDIO OUT [3.5mm Stereo Mini-jack] Control: 1 x IR IN [3.5mm Stereo Mini-jack] 1 x IR OUT [3.5mm Stereo Mini-jack] 1 x RS-232 [3pin-3.81mm Phoenix jack] 1 x USB HOST [USB Type B] 3 x USB DEVICE [USB Type A] 1 x ETHERNET [RJ45]
Receiver
Input: 1 x HDMI IN [Type A, 19-pin female] 1 x HDBT IN [RJ45, 8-pin female] 1 x AUDIO IN [3.5mm Stereo Mini-jack] Output: 1 x HDMI OUT [Type A, 19-pin female] 1 x AUDIO OUT [3.5mm Stereo Mini-jack] Control: 1 x IR IN [3.5mm Stereo Mini-jack] 1 x IR OUT [3.5mm Stereo Mini-jack] 1 x RS-232 [3pin-3.81mm Phoenix jack] 1 x USB HOST [USB Type B] 3 x USB DEVICE [USB Type A] 1 x ETHERNET [RJ45]
Mechanical Housing Color Dimensions Weight
Aluminium Enclosure — Front Panel; Metal Enclosure — Case Black Transmitter / Receiver: 200mm [W] x 100mm [D] x 30mm [H] Transmitter: 571g, Receiver: 571g
Power Supply
Input: AC 100 – 240V 50/60Hz Output: DC 24V/1A (US/EU standard, CE/FCC/UL certified)
Power Consumption
Operating Temperature
Total power consumption: 20.4W (POC) TX/RX Full load: 9.36W/9.84W; TX/RX no-load: 2.46W/3.36W
32 – 104°F / 0 – 40°C
Storage Temperature -4 – 140°F / -20 – 60°C
Relative Humidity 20 – 90% RH (no condensation)
Resolution / Cable Length
8K30 Feet / Meters
4K60 –
4K24 –
1080P60 –
Feet / Meters Feet / Meters Feet / Meters
HDMI IN / OUT
9.8ft / 3m
16ft / 5m
32ft / 10m 66ft / 20m
The use of “Premium High Speed HDMI” cable is highly recommended.
3 / 13
5. Operation Controls and Functions
5.1 Transmitter Panel
USB HOST
1
USB DEVICE
2
HOST DEVICE USB CONTROL
3
TX
LINK IN OUT eARC
4567 8
IR
TX RX
eARC
DC 24V ETHERNET
IR IN IR OUT RS-232
HDBT OUT
HDMI IN
HDMI OUT
AUDIO
0
0
1
1
IN
OUT
EDID CONFIG
9 10 11 12 13 15 14 16 17
18 19 20 21 22
No. Name
Function Description
1 USB HOST USB Host port, connected to PC.
2
USB DEVICE
Two USB extension ports, connected to U disk, mouse or keyboard.
HOST/
Switch to left (HOST), the USB HOST mode is enabled;
3
DEVICE USB Switch to right (DEVICE), the USB DEVICE mode is enabled. CONTROL Note: If the transmitter is set to USB HOST mode, the receiver must be set
switch
to USB DEVICE mode.
4
Power LED
Light on: The transmitter is powered on. Light off: The transmitter is powered off.
5 LINK LED
Light on: Transmitter and receiver are in good connection status. Light flashing: Transmitter and receiver are in poor connection
status or connected to the same device.
Light off: Transmitter and receiver are not connected.
6 IN LED
Video signal input indicator.
Light on: There is HDMI signal input. Light off: There is no HDMI input or the system is powered off.
7 OUT LED
Video signal output indicator.
Light on: There is HDMI signal output. Light off: There is no HDMI output or the system is powered off.
4 / 13
No. Name
8
eARC LED & button
9 DC 24V
ETHERNET 10 port &
indicators
11 IR IN port
Function Description
Press the eARC button to enable/disable the eARC/ARC function, and the eARC LED will indicate the status as following. Light on: The eARC/ARC mode is enabled, and the device is
working normally. Light flashing: The eARC/ARC mode is enabled, but the device
is working abnormally. Light off: The eARC/ARC mode is disabled.
DC 24V/1A power supply input port. Note that the extender supports POC function, it means that either transmitter or receiver is powered on by 24V/1A power adapter, the other one doesn’t need power supply.
Ethernet port with adaptive broadband rate. For example, if the transmitter is connected to a PC with a 100M rate, and the receiver is connected to a Gigabit router, the device can automatically switch the 100M rate of the transmitter to Gigabit rate. (Note: If the connected device only supports 100M rate, it cannot switch to Gigabit rate.) Ethernet Indicators: Light in green: the Ethernet rate is 1000 Mbit/s. Light in yellow: the Ethernet rate is 100 Mbit/s.
IR signal input port, connected to IR Receiver cable.
12 IR OUT port IR signal output port, connected to IR Blaster cable.
13 RS-232 port
The RS-232 serial port features different functions through the setting of the CONFIG DIP switch: (1) RS-232 signal pass-through (2) Control & FW upgrade (3) VS3000 FW upgrade (4) Dubug
HDBT OUT 14 port
HDBaseT Network port, connected to the HDBT IN port of the receiver with a CAT 6A/7 cable. It is used for various signals pass-through.
Data Signal 15 Indicator
(Yellow)
Light on: HDMI signal with HDCP. Light flashing: HDMI signal without HDCP. Light off: No HDMI signal.
Link Signal 16 Indicator
(Green)
Light on: Transmitter and receiver are in good connection status. Light flashing: Transmitter and receiver are in poor connection
status or connected to the same device.
Light off: Transmitter and receiver are not connected.
5 / 13
No. Name
Function Description
17
eARC/HDMI IN port
This port features two functions: (1) HDMI signal input port, connected to HDMI source device; (2) eARC/ARC audio port, connected to eARC/ARC amplifier.
18
HDMI OUT port
HDMI video signal output port. It can loop out the local video signal or output the video signal returned from the receiver.
19
AUDIO IN port
Analog audio input port. The audio from this port can be output through the AUDIO OUT port of the receiver.
AUDIO OUT Analog audio output port. It can output the audio from the AUDIO
20 port
IN port of the receiver.
21
EDID DIP switch
The DIP switch is used for EDID setting. (Set to 000 by default.) [DIP]=000: Copy RX HDMI OUT port sink EDID (Note: If there is no TV connected to the receiver, it will copy the EDID of the local loopout video.) [DIP]=001: HDMI 1080p@60Hz, Audio 2ch PCM [DIP]=010: HDMI 4K@60Hz 4:4:4, Audio 2ch PCM [DIP]=011: HDMI 4K@60Hz 4:4:4, Audio 5.1ch PCM/DTS/DOLBY [DIP]=100: HDMI 4K@60Hz 4:4:4, Audio 7.1ch PCM/DTS/
DOLBY/HD [DIP]=101: HDMI 8K@30Hz 4:4:4+4K@120Hz 4:4:4, Audio 2ch
PCM [DIP]=110: HDMI 8K@30Hz 4:4:4+4K@120Hz 4:4:4, Audio 5.1ch
PCM/DTS/DOLBY [DIP]=111: HDMI 8K@30Hz 4:4:4+4K@120Hz 4:4:4, Audio 7.1ch
PCM/DTS/DOLBY/HD
The DIP switch is used to set IR level and serial port access.
DIP SW1=0: The IR level is set to 12V.
DIP SW1=1: The IR level is set to 5V.
22
CONFIG DIP switch
DIP SW2/SW3=00: The RS-232 port is used for RS-232 signal pass-through.
DIP SW2/SW3=01: The RS-232 port is used for Control & FW
upgrade.
DIP SW2/SW3=10: The RS-232 port is used for VS3000 FW
upgrade DIP SW2/SW3=11: The RS-232 port is used for dubuging
6 / 13
5.2 Receiver Panel
USB HOST
USB DEVICE
1
2
HOST DEVICE USB CONTROL
3
RX
LINK IN OUT eARC
4567 8
IR
TX RX
eARC
AUDIO
DC 24V ETHERNET
IR IN IR OUT RS-232
HDBT IN
HDMI IN
9 10 11 12 13 15 14 16 17
HDMI OUT
IN
OUT
18 19 20
0 1 CONFIG
21
No. Name
Function Description
1 USB HOST USB Host port, connected to PC.
2
USB DEVICE
Two USB extension ports, connected to U disk, mouse or keyboard.
HOST/
Switch to left (HOST), the USB HOST mode is enabled;
3
DEVICE USB Switch to right (DEVICE), the USB DEVICE mode is enabled. CONTROL Note: If the transmitter is set to USB HOST mode, the receiver must be set
switch
to USB DEVICE mode.
4
Power LED
Light on: The receiver is powered on. Light off: The receiver is powered off.
5 LINK LED 6 IN LED 7 OUT LED
Light on: Transmitter and receiver are in good connection status. Light flashing: Transmitter and receiver are in in poor connection
status or connected to the same device. Light off: Transmitter and receiver are not connected.
Video signal input indicator. Light on: There is HDMI signal input. Light off: There is no HDMI input or the system is powered off.
Video signal output indicator. Light on: There is HDMI signal output. Light off: There is no HDMI output or the system is powered off.
7 / 13
No. Name
8
eARC LED & button
9 DC 24V
ETHERNET 10 port &
indicators
11 IR IN port
Function Description
Press the eARC button to enable/disable the eARC/ARC function, and the eARC LED will indicate the status as following. Light on: The eARC/ARC mode is enabled, and the device is
working normally. Light flashing: The eARC/ARC mode is enabled, but the device
is working abnormally. Light off: The eARC/ARC mode is disabled.
DC 24V/1A power supply input port. Note that the extender supports POC function, it means that either transmitter or receiver is powered on by 24V/1A power adapter, the other one doesn’t need power supply.
Ethernet port with adaptive broadband rate. For example, if the transmitter is connected to a PC with a 100M rate, and the receiver is connected to a Gigabit router, the device can automatically switch the 100M rate of the transmitter to Gigabit rate. (Note: If the connected device only supports 100M rate, it cannot switch to Gigabit rate.) Ethernet Indicators: Light in green: the Ethernet rate is 1000 Mbit/s. Light in yellow: the Ethernet rate is 100 Mbit/s.
IR signal input port, connected to IR Receiver cable.
12 IR OUT port IR signal output port, connected to IR Blaster cable.
13 RS-232 port
The RS-232 serial port features different functions through the setting of the CONFIG DIP switch: (1) RS-232 signal pass-through (2) Control & FW upgrade (3) VS3000 FW upgrade (4) Dubug
14
HDBT IN port
HDBaseT Network port, connected to the HDBT OUT port of the transmitter with a CAT 6A/7 cable. It is used for various signals pass-through.
Data Signal 15 Indicator
(Yellow)
Link Signal 16 Indicator
(Green)
Light on: HDMI signal with HDCP. Light flashing: HDMI signal without HDCP. Light off: No HDMI signal.
Light on: Transmitter and receiver are in good connection status. Light flashing: Transmitter and receiver are in poor connection
status or connected to the same device. Light off: Transmitter and receiver are not connected.
8 / 13
No. Name
Function Description
HDMI signal input port, connected to HDMI source device. It can transmit video with resolution of 1080P 24Hz in reverse to the 17 HDMI IN port HDMI OUT port of the transmitter. Note: It is a reserved port, being closed by default. Before using this port, you need to turn on it through command control, and make sure that the eARC function is disabled.
This port features two functions:
18
eARC/HDMI OUT port
(1) HDMI signal output port, connected to HDMI display device; (2) eARC/ARC audio port, connected to TV with eARC/ARC
function.
19
AUDIO IN port
Analog audio input port. The audio from this port can be output through the AUDIO OUT port of the transmitter.
20
AUDIO OUT port
Analog audio output port. It can output the audio from the AUDIO IN port of the transmitter.
The DIP switch is used to set IR level and serial port access.
DIP SW1=0: The IR level is set to 12V.
DIP SW1=1: The IR level is set to 5V.
DIP SW2/SW3=00: The RS-232 port is used for RS-232 signal
21 CONFIG DIP
pass-through.
switch
DIP SW2/SW3=01: The RS-232 port is used for Control & FW
upgrade.
DIP SW2/SW3=10: The RS-232 port is used for VS3000 FW
upgrade
DIP SW2/SW3=11: The RS-232 port is used for dubuging
9 / 13
5.3 USB Mode Applications
The Extender supports USB2.0 transmission, and Host/Device is configurable.
Mode 1: USB forward from TX to RX Switch the HOST/DEVICE USB CONTROL switch to left, then power off and reboot the transmitter to set to USB Host mode. Meanwhile, switch the DEVICE/HOST USB switch to left, then power off and reboot the receiver to set to USB Device mode.
Computer Host
HDMI IN USB Host LOOPOUT
USB / Host
USB / Device USB Host No Function
UTP Cable
HDMI OUT
Local Monitor &
Keyboard Mouse
USB Devices
USB Devices Remote Monitor &
Keyboard Mouse
Mode 2: USB reverse from RX to TX Switch the HOST/DEVICE USB CONTROL switch to right, then power off and reboot the transmitter to set to USB Device mode. Meanwhile, switch the DEVICE/HOST USB switch to right, then power off and reboot the receiver to set to USB Host mode.
NoteBook No Function
HDMI IN USB Host LOOPOUT
USB / Device
USB / Host USB Host
UTP Cable
HDMI OUT
Computer Host
Local Monitor &
Keyboard Mouse
USB Devices
USB Devices
Remote Monitor &
Keyboard Mouse
10 / 13
5.4 IR Pin Definition IR Receiver and Blaster pin’s definition as below:
IR BLASTER
IR RECEIVER
IR BLASTER + –
IR RECEIVER
Power 12V
Note: When the angle between the IR receiver and the remote control is ± 45 °, the transmission distance is 0-5 meters; when the angle between the IR receiver and the remote control is ± 90 °, the transmission distance is 0-8 meters.
11 / 13
6. Application Example
Mode 1: eARC/ARC Application
The Audio Return Channel (ARC) in HDMI 2.1 enables a TV, via a single HDMI cable or audio cable, to send audio data “upstream” to an A/V receiver, the extender will continue the upstream audio all the way to the transmitter. There it can be connected via HDMI ARC.
Desktop Computer
HDMI Cable
Network Cable
Switch
Audio Amplifier with eARC/ARC Function
USB Cable
TX
Transmitter
Network Cable
Audio Cable
Audio Cable
HDBaseT Cable
HDMI Cable eARC
Receiver
RX
USB Cable
USB Cable
Network Cable
HDMI Cable eARC
Audio Cable
Mouse
Speakers
USB Camera
Keyboard
Router
TV with eARC/ MIC ARC Function
Note: Please press the eARC buttons on the front panel of the transmitter and receiver to enable the eARC/ARC function before operating the system.
12 / 13
Mode 2: Ordinary Connection Application
Desktop Computer
USB Cable
Transmitter
Network Cable
Switch
Network Cable
HDMI Cable
Audio Cable
Audio Cable
TX
HDBaseT Cable
HDMI Cable
Receiver
USB Cable
RX
USB Cable
Mouse USB Camera
Keyboard
TV
Network Cable Router
HDMI Cable
Audio Cable
Speakers
TV
MIC
Note: Please press the eARC buttons on the front panel of the transmitter and receiver to disable the eARC/ARC function before operating the system.
The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
13 / 13
infobit AV- 4K Matrix Switchers, Wireless Presentation, Active Optical Cable and Conference Camera- Meeting Room Solutions
