Unbranded Stm15f2k60s2 Led Cubic Ball Diy Kit Instruction Manual

STM15F2K60S2 LED Cubic Ball DIY Kit

LED Cubic Ball DIY Kit

NTOE: This DIY installation is more difficult to be installed, please be patient until the
installation is complete!!! It is strongly recommended to browse the installation manual before starting
installation!!!

1. Introduction
New design concept, cool effect,Different light cube with a wonderful experience!

2. Parameter

NO. Parameter

1

Name

2

Size

3

Color

4

Shell

5

Weight

6

Nature

7

Power Supply

8

Power Type

9

Sound source

10

Control model

11

Basic function

Value DIY LED Cubic Ball Kit About 90*90*130mm RGB Acrylic Shell About 130g DIY Kit Mini USB DC4.5-5.5V 100mA Charger/Power Adapter/USB External Audio Input Infrared Remote Control or Button Control >30 animation modes; >6 spectrum animation modes

3. Function
1>. 8*16 LED display 2>. Various modes can be switched as your wish:
1). Offline animation models (up to a dozen):Free display or Key control(just parts models can be control by button or remote control).
2). Music spectrum mode:The spectral mode needs to be connected with an input audio signal, so that the optical cube can beat the music spectrum rhythm. 3>. Switch mode by remote control or button at any time mode.
4. Feature
1>. COOL FUN: The shape of innovation; 2>. MAGIC: At least 20 colorful animation, 4 spectrum animation; 3>. ABILITY: A full set of spare parts to develop practical ability; 4>. RECREATION: The elaborate and exquisite appearance can be considered as a gift. 5>. CRAFT COLLECTION: All handmade works of art that can be collected.

5. Component listing

NO.

Component Name

PCB Marker

Parameter

QTY

1

Metal Film Resistor

R1

100K

1

2

MINI USB Female Socket J1

5P

1

3

IC Socket

U1

DIP-40

1

4

STM15F2K60S2

U1

DIP-40

1

1

5

Audio Socket

6

Monolithic Capacitor

7

Power Switch

8

Mode Button

9

Electrolytic Capacitor

10

Infrared Receiver

11

RGB LED

12

Copper Pillar

13

Screw

14

USB Audio Cable

15

White Cable

16

Remote Control

17

Acrylic Welding Template

18

PCB

6. Basic instruction

P1 C2 S1 S2 C1 IR1 D1-D4

3.5mm SMD

1

1uf 105

1

Red Self-locking

1

Black

1

220uf 16V

1

VS1838V

1

3mm

132

M3*12mm

4

M3*5mm

4

About 45mm

1

About 1M

1

85*40*6mm

1

82*82mm

1

70*70mm

1

1>. Mode Button:Change the LED display animation; 2>. Power Switch: Control power; 3>. MINI USB:Power and Audio input; 4>. Audio Socket:Audio output; 5>. Work Indicator:Flash automatically; 6>. Infrared Receiver:Receive remote control signal and Change the LED display animation.
2

7. Remote control button description
8. Application:
1>. Learn Electronics. 2>. Learn MCU. 3>. Practice soldering. 4>. DIY production. 5>. Graduation design. 6>. Curriculum design. 7>. Electronic competition. 8>. Gift giving. 9>. Arts and crafts collection. 10>. Souvenir collection. 11>. Family decoration.
9. Installation Steps(Please be patient install! !)
NTOE: This DIY installation is more difficult to be installed, please be patient until the
installation is complete.!!! It is strongly recommended to browse the installation manual before starting
installation!!! Tips:
1>. Install small components at first; 2>. Install complex components preferentially; 3>. Pay attention to the installation direction of components. 4>. Make sure the soldering iron does not touch the components for a long time.Otherwise it is easy to damage the components.
3

There are a variety of installation methods that show different effects.The following describes two kinds of installation, user can choose according to your own preferences. Installation method 1: Step 1: Install 1pcs 100K resistor,mini USB female socket and DIP-40 IC Socket.Pay attention to the installation direction for IC Socket.
Step 2: Install 1pcs Monolithic Capacitor and Audio Socket.(User can install 4pcs 3mm LED work indicator on D1-D4 in this step and Note the direction.)
4

Step 3: Install 2pcs switch and 1pcs Electrolytic Capacitor(Pay attention to the installation direction).
5

Step 4: Install 1pcs infrared receiver. 1>. Installed on the other side of the PCB; 2>. The receiver is facing the side where the keys are located.
Step 5: Install 4pcs LED work indicator on D1-D4 and Pay attention to the installation direction.(If your have install LED on step 2,Please ignore Step 5 in here)
6

Step 6: Install Copper Pillar and Screw.
Step 7: Install Copper Pillar and Screw on Acrylic Welding Template.
7

Step 8: Acrylic Welding Template Ring,LED Layer and Anode solder pad corresponding relationship.
8

Step 9: Process LED.Curved LED’s Long pin(Positive pole) and form a right angle.Please be careful not to damage the LED.
9

Step 10: Install the 1st Ring LED with Acrylic welding template.Short pin(Negative pole) outward,Longer pin(Positive pole) interconnection.
10

11

Step 11: Install the 2nd Ring to the 6th Ring total 8pcs LED rings as Step 10. NOTE: It is need to install 2pcs the 2nd Ring and 2pcs 2pcs 3rd Ring.Others
12

for 1pcs.
Step 12: Install the 6th Ring as the 1st Layer LED.Bend the pins slightly.First fix a pin, and then fixed the pin on opposite position.Use pliers to bend the tip of the pin if not convenient to install.
At same time user can connect the 1st layer to Y0 by white cable !(This manual does not use this method,But recommend this method)
Please ignore the LED color differences, only demonstrate the installation steps! NOTE:LED is been install on PCB side which just have a infrared receiver.Please do not install error!!
13

14

15

Step 13: Install 2nd~5th layer as Step 13.
16

17

Step 14: Install 6th~8th layer,but bend the LED pins in different ways.
18

19

20

21

22

23

Step 15: Connect each to Y0~Y7 with white cable as picture. Step 15: Install IC and Test!
24

Installation method 2(Picture only):
25

26

27

28

29

10. Effect demonstration(Only for appreciation)
30

31

32