FNLS02 Ladder Shelf Bookcase
Product Information:
Product Name: Ladder Shelf
Instruction Manual Version: V1.0
Model: FNLS02
Part Numbers: A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q,
R
Image: [Image of the product]
Additional Support: For any issues or inquiries, please contact
us at [email protected] (US/CA/DE/UK/FR/IT/ES/AU)
Product Usage Instructions:
Step 1:
Secure poles [B] and [C] to board [G]. Then attach parts [I] to
the bottom of poles [B] and [C].
Note: Refer to the image for proper positioning
of the parts.
Step 2:
Secure parts [A] to the top of poles [B] and [C].
Note: Refer to the image for proper positioning
of the parts.
Step 3:
Secure board [F], [E], and [D] to the assembled poles.
Note: Refer to the image for proper positioning
of the parts.
Step 4:
Secure part [H] to the back side of the shelf.
Note: Refer to the image for proper positioning
of the parts.
Step 5:
Step 5-1: Secure part [M] to the board [D].
Step 5-2: Drill a pilot hole using a 5mm
diameter drill bit (not included), then knock the anchor [N] into
the pilot hole. Finally, tighten screw [O] via part [M] to the
anchor to secure the shelf to the wall.
Note: Refer to the image for proper positioning
of the parts.
Note: The measurements provided in the
instructions are in millimeters.
Caution: Please ensure that the ladder shelf is
securely fastened to the wall to prevent accidents or injuries.
Ladder Shelf
Instruction Manual
V1.0
Model: FNLS02
Thank you for choosing this FURNINXS product! At FURNINXS we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don’t hesitate to contact at [email protected] (US/CA/DE/UK/FR/IT/ES/AU)
Part number
A B C D E F G H I J K L M N O P Q R
Image
6.3x40mm M6x27mm
M6 ST4x40mm ST4.2x10mm
Quantity x2 x2 x2 x1 x1 x1 x1 x1 x4 x16 x4 x4 x1 x1 x1 x1 x1 x1
STEP 1
B x2 C x2 J x4 I x4 G x1
Secure poles [B] and [C] to board [G]. Then attach parts [I] to the bottom of poles [B] and [C]
C B
J
10mm
40mm
J
G
27mm
J 40mm
I
STEP 2
A x2 Secure parts [A] to the
top of poles [B] and [C]
A A
STEP 3
D x 1 E x 1 F x 1 J x12
Secure board [F], [E] and [D] to the assembled poles
D
E J
F B
C
STEP 4
Kx4 Lx4 Hx1
10mm 40mm
K 27mm
40mm
Secure part [H] to the back side of the shelf L K
back side
H
STEP 5
Fasten the shelf to wall
Mx1
Nx1
Ox1
D
Px1
STEP5-1
Secure part [M] to the board [D].
STEP5-2
Drill a pilot hole using a 5mm diameter drill bit (not included), then knock the anchor [N] into pilot hole. Finally you need to tighten screw [O] via part [M] to the anchor to secure the shelf to wall.
STEP5-1
P
STEP5-2
5mm Wall
N
Wall
M P
10 mm
O 40 mm 27 mm 40 mm
O
