MH-SH-189 Denzil 70 Inch Natural and Brown 5 Shelf Ladder Bookcase
Product Information
Product Name: MH-SH-189
Estimated Assembly + Installation Time: 15:00
Number of People Required for Assembly: 2 or more
Product Parts:
- A, B, C, D – Side Legs
- E, F, G, H, I – Shelf x5
- (L)-Bolt M6x18mm x20
- (M)-Bolt M8x18mm x4
- (N)-Screw 4×40 mm x4
- (O)-Wall Plug x4
Product Usage Instructions
1. Put on mood music! To prevent damage to the product, use the
clean side of package carton or rug as a working surface for
assembly. In the event of missing or damaged parts, delivery
problems, etc., please reach out to our team.
2. Clean the product regularly with a soft and dry cloth. To
protect the finish, avoid using abrasive cleaners. Wipe up spills
immediately. While assembling the product, tighten the bolts up to
50%. Once all parts are in place, only then fully tighten the
bolts.
3. Follow the below steps for assembly:
- Attach the side legs together (A to B and C to D). To hold them
in place, insert bolts (M) in the given holes. Tighten using the
allen key(Q). - Start by placing side leg (AB) on the floor. Align shelves
(E,F, G, H, I) with any slots on the side leg. Once aligned, secure
them in place using washer (J), lock washer (K), and bolt (L).
Tighten all points using allen key (P). - Insert side leg (CD) in the slots on shelves (E,F, G, H, I).
Secure it in place using washer (J), lock washer (K), and bolt (L).
Tighten all points using allen key (P).
4. Follow the below steps for installation:
- Place the assembled shelf against the wall and put a spirit
level on the top plank to check alignment. Adjust if needed. Have
another person stand back to see if both the legs (AB, CD) are in
level with the wall. Then, mark the top of the shelf on the
wall. - Drill holes on the points you just marked.
- Using a hammer, insert wall plugs (O) in the holes you just
marked. - Now, insert screws (N) and tighten completely with the help of
a screwdriver.
5. Voila! Your shelf is now assembled and secure!
MH-SH-189
15 : 00
estimated assembly + installation time
2 or more people required
1
Ok, let’s get started!
Put on mood music! To prevent damage to product, use the clean side of package carton or rug as working surface for assembly. In the event of missing or damaged parts, delivery problems etc., please reach out to our team. We will be happy to fix the problem!
2
care guide
Clean regularly with a soft and dry cloth. To protect finish, avoid use of abrasive cleaners. Wipe up spills immediately. Please!
While assembling the product, tighten the bolts up to 50%. Once all parts are in place, only then fully tighten the bolts.
3
product parts
A
B
C
D
Side legs
E,F,G,H,I Shelf x5
4
(J)-Flat Washer Ø20mmxØ8mm x20
(K)-Lock Washer Ø15mmxØ8mm x20
(L)-Bolt M6x18mm x20
(M)-Bolt M8x18mm x4
what’s included
(N)-Screw 4×40 mm x4
(O)-Wall Plug x4
(P)-Allen key Ø4mmx110mm x1
(Q)-Allen key Ø5mmx110mm x1
5
assembly instructions
Friendly Tip: Take a deep breath going in. This may be a
tricky part, but nothing too overwhelming. Just follow these steps to the T and the
outcome will be worth it!
While assembling the product, tighten the bolts up to 50%. Once all parts are in place, only then fully tighten the bolts.
6
step 1:
Attach the side legs together (A to B and C to D).
A
C
B
D
step 2:
To hold them in place, insert bolts (M) in the given holes. Tighten using the allen key(Q).
M
Q
M
7
step 3:
Start by placing side leg (AB) on the floor. Taking this image as reference, align shelves (E,F, G, H, I) with any slots on the side leg.
EF GH I
AB
step 4:
Once aligned, secure them in place using washer (J), lock washer (K), and bolt (L). Tighten all point using allen key (P).
J K
LP AB
8
step 5:
Now, insert side leg (CD) in the slots on shelves (E,F, G, H, I). Secure it in place using washer (J), lock washer (K), and bolt (L). Tighten all point using allen key (P).
J
CD
K
L PP AB L
9
installation instructions
While assembling the product, tighten the bolts up to 50%. Once all parts are in place, only then fully tighten the bolts.
10
step 1:
Place the assembled shelf against the wall and put a spirit level on the top plank to check alignment. Adjust if needed. Have another person stand back to see if both the legs (AB, CD) are in level with the wall. Then, taking this image as reference, mark the top of the shelf on the wall.
step 2:
Drill holes on the points you just marked.
11
step 3:
Using a hammer, insert wall plugs (O) in the holes you just marked.
O
step 4:
Now, insert screws (N) and tighten completely with the help of a screwdriver.
N
12
Voila! Your shelf is now assembled and secure!
