Sp Connect Charging Anti Vibration Module User Manual

Charging Anti Vibration Module

Product Information

This is an outdoor navigation device that requires setup and
charging. It complies with Part 15 of the FCC Rules and operates
within recommended operating temperatures. The device has a USB-C
input for charging and a wireless output for charging compatible
phones. The maximum charge power is 15W, but it may vary depending
on the power source, phone model, and temperature. The device has a
power consumption of 8-20mA in standby mode. It is IP65 rated,
offering protection against dust and water.

Product Usage Instructions

  1. Ensure the device is charged before use. Connect the provided
    USB-C cable to the USB-PD input of the device and the appropriate
    power source.
  2. Place your compatible phone on the wireless charging module of
    the device for wireless charging. Ensure that the phone is properly
    aligned with the module for efficient charging.
  3. Keep in mind that the charge power may vary depending on
    factors such as the power source, phone model, and
    temperature.
  4. The device can be used for outdoor navigation. Follow the
    manufacturer’s instructions for using the navigation features.
  5. Make sure to operate the device within the recommended
    operating temperature range for optimal performance.
  6. To comply with FCC rules and minimize interference, avoid using
    the device in close proximity to radio or television equipment. If
    interference occurs, try turning off the equipment causing the
    interference or adjust its distance from the device.
  7. For safety reasons, maintain a minimum distance of 20cm between
    the device radiator and your body during installation and
    operation.

SP Connect is a registered trademark © 2021 SP United / PATENTED SYSTEM / All rights reserved

!

EN
ATTENTION!
· Cut off power supply when not in use. · Avoid use in a humid or high
temperature environment if possible. · Don’t hit, disassemble or re-assemble
the product – this may lead to malfunction. · For waterproof connection use compatible SP ConnectTM cables only. · High Temperatures can reduce charge efficiency. · Smartphone power consumption can exceed charge power. Setup phone appropriately!

Setup Tips for Outdoor Navigation
· Outdoor navigation at high temperature reduces charge efficiency.
· Use adaptive screen brightness, consider using night mode, switch off screen occasionally.
· Use locally stored maps to avoid data traffic and power consumption.
· Turn off data traffic if not needed.
· Turn off unnecessary apps running in the background.
· Turn off Wi-Fi antenna while you are moving.

DE
ACHTUNG!
· Stromzufuhr unterbrechen, wenn nicht in Verwendung.
· Einsatz in einer feuchten Umgebung oder bei hohen Temperaturen nach Möglichkeit vermeiden.
· Nicht auf das Produkt einschlagen, zerlegen oder wieder zusammenbauen · dies kann zu Fehlfunktionen führen.
· Für eine wasserdichte Verbindung nur kompatible SP ConnectTM-Kabel verwenden.
· Hohe Temperaturen können die Ladeleistung verringern.

· Der Stromverbrauch des Smartphones kann die Ladeleistung übersteigen. Telefon entsprechend einstellen!
Tipps zur Einrichtung für die Navigation im Freien
· Navigation im Freien bei hohen Temperaturen verringert die Ladeleistung.
· Verwende eine angepasste Bildschirmhelligkeit, erwäge den Nachtmodus und schalte den Bildschirm gelegentlich aus.
· Verwende lokal gespeicherte Karten, um Datenverkehr und Stromverbrauch zu vermeiden.
· Schalte den Datenverkehr aus, wenn er nicht benötigt wird.
· Schalte unnötige Apps aus, die im Hintergrund laufen.
· Schalte die Wi-Fi-Antenne aus, wenn du dich bewegst.
FR
ATTENTION!
· Couper l’alimentation électrique lorsqu’il n’est pas utilisé.

· Si possible, éviter d’utiliser le produit dans un environnement humide ou à des températures élevées.
· Ne pas frapper, démonter ou remonter le produit · cela peut entraîner un dysfonctionnement.
· Pour une connexion étanche, utiliser uniquement des câbles SP ConnectTM compatibles.
· Des températures élevées peuvent réduire la puissance de charge.
· La consommation d’énergie du smartphone peut dépasser la puissance de charge. Régler le téléphone en conséquence!
Conseils de configuration pour la navigation extérieure
· La navigation en extérieur à température élevée réduit l’efficacité de la charge.
· Utilisez une luminosité d’écran adaptative, pensez à utiliser le mode nuit, éteignez l’écran de temps en temps.
· Utilisez des cartes stockées localement pour éviter le trafic de données et la consommation d’énergie.
· Désactivez le trafic de données s’il n’est pas nécessaire.

· Désactivez les applications inutiles fonctionnant en arrière-plan.
· Éteignez l’antenne Wi-Fi lorsque vous vous déplacez.
ES
¡ATENCIÓN!
· Desconecta la fuente de alimentación cuando no la utilices.
· Si es posible, evita utilizarlo en un entorno húmedo o a altas temperaturas.
· No martillees, desmontes o vuelvas a montar el producto, ya que podrías provocar un mal funcionamiento.
· Utiliza sólo cables SP ConnectTM compatibles para una conexión a prueba de agua.
· Las altas temperaturas pueden reducir el rendimiento de la carga.
· El consumo de energía del smartphone puede superar la potencia de carga. ¡Ajusta el teléfono en consecuencia!
Consejos de configuración para la navegación en exteriores
· La navegación en exteriores a altas

temperaturas reduce la eficiencia de la carga.
· Utiliza un brillo de pantalla adaptado, considera el uso del modo nocturno, apaga la pantalla de vez en cuando.
· Utiliza mapas almacenados localmente para evitar el tráfico de datos y el consumo de energía.
· Apaga el tráfico de datos si no es necesario.
· Apaga las aplicaciones innecesarias que se ejecutan en segundo plano.
· Apaga la antena Wi-Fi cuando estés en movimiento.

CHARGING ANTI VIBRATION
MODULE
EN / DE / FR / ES

FCC Statement

Technical Specifications

1

2

3 Nm

3 Nm

3

Input

USB-C: USB-PD
USB-A: 5V/2A · 5V/3A QC 2.0/3.0

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.

M5×20 M5×16

v1

v2

USB Power Source Stromquelle Source de courant Fuente de energía

Wireless Output
Recommended Operating Temperature

Max 15W Charge power is variable and depends on power source, phone model, temperature, etc.
-10–40° C Charge performance will drop above ~40° C

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However. there is

Power Consumption

8–20 mA (Standby)

no quarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

1

2

IP65 RATED: No ingress of dust; complete protection against contact (dust tight). Water projected by a nozzle (6.3 mm) against enclosure from any direction shall have no harmful effects. Minimum operating temperature: 0°C / 32°F

· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equioment into an outlet on a circuit different from that
to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth

for an uncontrolled environment. This equioment should be installed

12V DC CABLE, #52809 6V DC CABLE, #52810

IP65

and operated with minimum distance 20cm between the radiator & your body.

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals