VT-6242U LED Backlit Panel
Product Information
The LED Backlit Panel is a lighting fixture designed for indoor
use. It is available in two models: VT-6242U and VT-6242. The SKU
numbers for these models are 216777 and 6826-TPA/6827-TPA,
respectively. The panel has a square shape and comes in two wattage
options: 40W for model VT-6242U and 36W for model VT-6242. The
useful lumen output is 4000lm for VT-6242U and 4320lm for VT-6242.
The beam angle is wide, and the color rendering index (CRI) is
greater than 80. The power factor (DF) is greater than 0.9,
ensuring efficient operation. The panel has a long life span of
30,000 hours and can withstand an operation temperature range. The
input power requirement is DC:30-42V. The panel’s body is made of
aluminum and TPA(PC) material, providing durability. The VT-6242
model also features a quick connector for easy installation. The
panel has an IP40 rating, making it suitable for indoor use.
Product Usage Instructions
- Make a hole into the ceiling at the desired location.
- Fix the LED Backlit Panel into the ceiling, ensuring it is
securely attached. - Wire the DC cable of the panel to the driver, ensuring correct
connections. - Wire the AC source cable to the power supply, following proper
electrical safety guidelines. - Turn on the switch to test the fixture light. Ensure it
illuminates properly.
Note: The LED Backlit Panel operates on DC 30-42V. It is
important to connect the conductor correctly before connecting it
to the power supply main. Please refer to the installation diagram
for further clarification. For any queries or issues with the
product, please contact us at [email protected] or visit
V-TAC HOUSE, KELPATRICK ROAD, SLOUGH, BERKSHIRE, SL1 6BW, UK.
Caution: The panel should not be covered with thermally
insulating material. Dispose of the product responsibly and in
accordance with local regulations.
LED BACKLIT PANEL
TECHNICAL DATA:
MODEL
VT-6242U
VT-6242
SKU
216777
6826-TPA/6827-TPA
SHAPE
SQUARE
SQUARE
WATTS
40W
36W
LUMENS
4000lm Useful Lumen
4320lm Useful Lumen
BEAM ANGLE
110°
110°
CRI
>80
>80
DF
>0.9
>0.9
ON/OFF CYCLE
>15,000
>15,000
LONG LIFE
30,000 HOURS 30,000 HOURS
OPERATION TEMPERATURE
-20°C to +45°C
-20°C to +45°C
INPUT POWER
DC:30-42V
DC:30-42V
DIMENSION 595x595x34mm 595x595x34mm
BODY TYPE
ALUMINUM+TPA(PC)
QUICK CONNECTOR IS AVAILABLE FOR VT-6242 ONLY
5
WARRANTY*
IP40
RATING
For Panel
YEARS
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING!
1. Please make sure to turn off the power before starting the installation. 2. Installation must be performed by a qualified electrician. 3. The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced. 4. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. 5. For Indoor use only
Luminaires not suitable for covering with thermally insulating material.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT PLEASE REACH OUT TO US AT [email protected] V-TAC HOUSE, KELPATRICK ROAD, SLOUGH, BERKSHIRE, SL1 6BW, UK.
This marking indicates that this product should not be disposed of with other household wastes.
Caution, risk of electric shock.
Non-replaceable control gear
Non-replaceable light source
20 PAP
Note: The panel works on DC 30-42V, please connect correctly with the conductor before connecting the conductor to the power supply main. ‘This product contains a light source of energy efficiency class <F>’, where <F> shall be replaced by the energy efficiency class of the contained light source.
INSTALLATION DIAGRAM:
INSTALLATION INSTRUCTIONS
1. Make a hole into the ceiling. 2. Fix the panel into the ceiling. 3. Wire the DC cable of the panel to the driver and then wire the AC source cable to the power supply. 4. Turn on the switch, test the fixture light on.
