Kroft Leather Strap Shelf Instruction Manual

Leather Strap Shelf

Product Information

Product Name: Leather Strap Shelf Kroft

Number of Shelves: 3

  • 23 Shelf
  • 35 Shelf
  • 47 Shelf

Included Hardware:

  • Washer x 2
  • Screw x 2
  • Drywall Anchor x 2

Recommended Tools:

  • Drill
  • Level

Product Usage Instructions

  1. Using a level, measure and mark two points on the wall
    approximately 10″ above the desired height of the shelf.
  2. We recommend the following spacing for each shelf:
  • 17″ apart for the 23 Shelf
  • 23″ apart for the 35 Shelf
  • 29″ apart for the 47 Shelf
  • TIP: When drilling the hole, be sure to keep the drill bit
    level. This will ensure the straps are mounted flush to the
    wall.
  • Insert drywall anchors into the drilled holes.

    A hammer may be used to gently tap the anchor until it is flush
    with the wall, taking care not to drive the collar of the anchor
    beneath the surface of the wall.

  • Fold the leather strap in half, aligning the two holes.
  • Using a screwdriver or drill, secure the strap to the wall by
    inserting the screw over the washer and then through the leather
    strap holes. Repeat with the second leather strap.
  • Insert the shelf between the leather straps and adjust it to be
    level.
  • You’re done! Your Leather Strap Shelf Kroft is now ready for
    use.

    LEATHER STRAP SHELF KROFT

    23″ SHELF
    10½” 1″
    6″ 23″

    35″ SHELF
    10½” 1″
    6″ 35″

    47″ SHELF
    10½” 1″
    6″ 47″

    INCLUDED HARDWARE:

    Wa s h e r x 2

    Screw x 2

    Drywall Anchor x 2

    RECOMMENDED TOOLS:

    Drill

    Level

    HOLE DISTANCE RECOMMENDATIONS 17″
    23″ Shelf 23″
    35″ Shelf 29″
    47″ Shelf

    1. Using a level, measure and mark two points on wall approximately 10″ above desired height of shelf.
    We recommend the following spacing for each shelf:
    17″ apart for 23″ shelf 23″apart for 35″ shelf 29″ apart for 47″ shelf

    2. Using a ¼” drill bit, drill two holes through wall at marked points.
    TIP When drilling the hole, be sure to keep the drill bit level. This will ensure the straps are mounted flush to the wall.

    3. Insert drywall anchors into the drilled holes.
    A hammer may be used to gently tap the anchor until it is flush with the wall, taking care not to drive the collar of the anchor beneath the surface of the wall

    4. Fold leather strap in half aligning the two holes. Using a screwdriver or drill, secure to wall by inserting the screw over the washer then through the leather strap holes. Repeat with second leather strap.

    5. Insert shelf between the leather straps and adjust to level.

    Done!

  • Documents / Resouces

    Download manual
    Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


    Related Manuals