3210 Floss Tree Assembly
Product Information: Floss Tree Assembly
The Floss Tree Assembly comes in two models – 3210 (Counter
Model) and 3211 (Floor Model). It is used for making cotton candy.
The product is manufactured by Gold Medal Products Co. located at
10700 Medallion Drive, Cincinnati, Ohio 45241-4807, USA. For any
queries related to the product, customers can reach out to the
customer care team at 1-800-543-0862 or visit gmpopcorn.com.
Assembly Instructions
1. Assemble the unit on a flat and level surface.
2. Ensure that each rack support is securely fastened before
use.
3. For the 3211 Floor Model Tree:
- Place the sign holder at the top of the tree.
- Place the bearing ring on the rack holder.
- Place the rack on top of the bearing as shown in the
image.
4. For the 3210 Counter Model Tree:
- Set the rack height and tighten the thumb screw to fasten it in
place. - Place the bearing ring on the rack holder.
- Place the rack on top of the bearing as shown in the
image.
Note: Refer to the images provided in the manual for better
understanding of the assembly instructions.
Part No. 110312
10700 Medallion Drive, Cincinnati, Ohio 45241-4807, USA 1-800-543-0862
Floss Tree Assembly
Model No. 3210 and 3211
gmpopcorn.com
The 3210 (Counter Model) and 3211 (Floor Model) assembly instructions shown (counter model images shown below for general reference).
Assemble unit on a flat, level surface. Make sure each rack support is securely fastened before use.
Sign Holder
3211 Floor Model Tree
Rack Assembly
Rack Support
Bearing
3210 Counter Model Tree
1
Thumb
Screw
Set rack height, then tighten
thumb screw to fasten in place.
2
Place bearing ring on rack holder as shown.
3
Place rack on top of bearing as shown.
© 2022 Gold Medal Products Co.
Page 1 of 1
Part No. 110312
Concession Supplies & Equipment | Gold Medal Products Co.
