DESK-V100EBY Electric Single Motor Desk Frame Memory Controller
DESK-V100EBY Controller
The DESK-V100EBY Controller is an electronic device designed to
control the height of a desk. It allows the user to adjust the desk
height to their desired position, providing comfort and convenience
during work hours. The controller comes with safety instructions
that must be followed to avoid damage or serious injury.
Product Usage Instructions
Setting Minimum/Maximum Height: To set the
current height as the maximum, press and hold the 1 and 2 buttons
simultaneously for more than three seconds. Hon will be displayed.
To cancel the maximum height, repeat the process. HoF will be
displayed. When the maximum height is reached during operation, the
panel will display HI notifying the upper limit has been reached.
To set the current height as the minimum, press and hold the 3 and
4 buttons simultaneously for more than three seconds. Lon will be
displayed. To cancel the minimum height, repeat the process. LoF
will be displayed. When the minimum height is reached during
operation, the panel will display Lo notifying the lower limit has
been reached.
Troubleshooting: If the desk overheats, the
panel will display ER1. Press and hold the down arrow to perform a
reset. Allow the desk to rest for more than 18 minutes before
operating.
Important Safety Instructions: Keep the monitor
and laptop base fully on the desktop. Follow cable routing
instructions to avoid pinching cables. Leave enough slack in cable
to allow for full range of vertical motion (15/38 cm). Raise
desktop slowly to keep items stable.
DESK-V100EBY Controller
Instruction Manual
SKU: DESK-V100EBY Controller
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-v100eby GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY. · DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED. · DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED. · NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS. · NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS. · ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED. · OUTDOOR USE IS PROHIBITED.
OPERATING CONTROL PANEL
OPERATING INSTRUCTIONS: Press the up arrow, the desk will automatically raise to the highest position. Pressing the down arrow will automatically lower the desk to the lowest position. Memory Mode To store a certain height in the controller’s memory, press the 1 button for more than three seconds. “S-1” will be displayed, indicating that the current height has been saved to the 1 button sucessfully. Repeat the process using buttons 2,3, and 4. Switch the Display from Centimeter to Inch The preset measurement shown on the display is cm. If you would like to change cm to inch, press and hold buttons 1 and 4 for more than three seconds. Reset Mode 1. If the height of the desk is incorrect, press the down arrow until the desk moves to the fully lowered position. Press and hold the down arrow again for at least three seconds and release. “rSt” will be displayed. 2. If the system displays “Er1”, press and hold the down arrow for more than three seconds and release. “rSt” will be displayed. Collision Avoidance Settings Press and hold the down and up buttons together for more than three seconds to enter the Collision Avoidance Settings Mode. Use the arrow buttons to adjust the sensitivity level. Once the sensitivity has been selected, press the up and down arrows again for more than three seconds to save the setting. Collision Avoidance Sensitivity Levels: 0-9 0: Turn off collision avoidance. 1-9: Level 1 is the lowest sensitivy and level 9 is the highest.
2
Setting the Minimum/Maximum Height Press the 1 and 2 buttons at the same time for more than three seconds to set the current height as the maximum. “Hon” will be displayed. To cancel the maximum height, repeat the process. “HoF” will be displayed. When the maximum height is reached during operation, the panel will display “HI” notifying the upper limit has been reached.
Press the 3 and 4 buttons at the same time for more than three seconds to set the current height as the minimum. “Lon” will be displayed. To cancel the minimum height, repeat the process. “LoF” will be displayed. When the minimum height is reached during operation, the panel will display “Lo” notifying the lower limit has been reached.
TROUBLESHOOTING
Error Code
ER1
Hot
Description/Resolution
Press the and hold the down arrow to perform a reset. The desk is overheated. Allow the desk to rest for more than 18 minutes before operating.
CAUTION!
Keep monitor and laptop base fully on
the desktop.
Follow the cable routing instructions to avoid the potential to
pinch cables.
Leave enough slack in cable to allow for full range of vertical motion (15″ / 38 cm).
Raise desktop slowly to keep items stable.
Failure to follow these instructions may result in property damage and/or personal injury.
3
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 04/08/2022 REV1
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
AVG. RESPONSE TIME (within office hrs): 1HR 8M – 23% within < 15m – 38% within < 30m – 61% within < 1hr – 83% within < 2hr – 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Register a .US.COM domain today!
VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
Electric Single Motor Desk Frame with Memory Controller – VIVO - desk solutions, screen mounting, and more
