Helena Floor Lamp
Product Information: Helena Floor Lamp
The Helena Floor Lamp is a stylish and functional lighting
solution for your home. It comes with a polarized plug for added
safety, reducing the risk of electric shock. The lamp features a
modern design with a floor base and shade, and it includes all the
necessary components for easy installation.
- Part A: Power Cord
- Part B: Bulb (x7)
- Part C: Set Screws (x2)
- Part D: Hex Key
- Part E: Helena Floor Shade
- Part F: Helena Floor Base
Please ensure that you have received all the components listed
above before proceeding with the installation. If any component is
missing, please contact us for assistance.
Product Usage Instructions
Installation
- Check that you have received all the components mentioned
above. - Ensure the electrical power source is turned off before
starting the installation. - Feed the cord from the shade (Part E) through the floor lamp
base (Part F) and align the shade with the base connector. - Insert the set screws (Part C) into the designated slots using
the provided hex key (Part D). - Gently screw in the included lightbulbs (Part B) into the
fixture sockets of the lamp shade. - Carefully tilt the lamp to its side and connect the wire from
the shade to the power cord. Twist to secure the connection. - Once connected, gently tilt the lamp back and slide the quick
connect under the base of the lamp.
Usage
- Plug in the floor lamp to a power outlet.
- Turn on the light switch to illuminate the lamp.
- To control the brightness, spin the finial on the top of the
Helena table shade (Part E).
Note: If the polarized plug does not fit fully and easily into
the outlet, do not force it. Contact a qualified electrician for
assistance.
Helena Floor Lamp
How to Install Your New Light Please check that you received all of the components pictured in this guide. Reach out to us if anything is missing. It’s very rare, but it happens. Don’t forget to turn off the electrical power source.
You won’t need any additional tools.
CAUTION As a safety feature, this lamp has a polarized plug to reduce the risk of electric shock. This means it has two flat prongs and a third circular prong underneath, and it will fit in an outlet one way only. If the plug does not fit fully and easily into the outlet, do not force it; contact a qualified electrician.
ATTENTION Par mesure de sécurité, cette lampe a une fiche polarisée pour réduire le risque de choc électrique. Cela signifie qu’il a deux broches plates et une troisième broche circulaire en dessous, et qu’il ne s’insère dans une prise que dans un seul sens. Si la fiche ne s’insère pas complètement et facilement dans la prise, ne la forcez pas; contactez un électricien qualifié.
Contents
Part A Power Cord
Part B Bulb (x7)
Part C Set Screws (x2)
Part D Hex Key
Part E Helena Floor Shade
Part F Helena Floor Base
Assembly Guide
1 of 3
incommonwith.com
Helena Floor Lamp
Step 1: Feed the cord from the shade (E) through the floor lamp base (F) Align the shade with the base connector.
Step 2: Insert set screws (C) using the hex key provided (D).
E E
F F
Step 3: Gently screw in the included lightbulbs (B) into the fixture sockets of the lamp shade.
Step 4: Carefully tilt the table lamp to it’s side. Connect the wire from the shade to the power cord. Twist to secure. Once connected, gently tilt the lamp and slide the quick connect under the base of the lamp.
B A
Assembly Guide
2 of 3
incommonwith.com
Step 5: Plug-in the floor lamp and turn on the light.
Helena Floor Lamp
Step 6: Spin the finial on the top of the Helena table shade (E) to turn on the fixture and control brightness.
A
Assembly Guide
3 of 3
incommonwith.com
In Common With
