LAGAN
Installation must be performed in compliance with current local construction and plumbing regulations. If in doubt, contact a professional.
Switch off main shut-off valve before changing mixer tap.
G1/2″
Seal the open surfaces with silicone to prevent water from penetrating the worktop upon any leaks. Silicone is not included.
IMPORTANT! Do not tighten too hard: this can damage hoses/pipes and washers.
Before use: Unscrew the Aerator/Flow Guide and allow the water to run freely for a few minutes. Then screw the Aerator/Flow Guide back in place. Ensure that it is tight to prevent removal by hand.
Check at regular intervals to make sure that the installation is not leaking.
© Inter IKEA Systems B.V. 2020
2021-03-11
AA-2256181-2
