Ecoworks 3-in-1 Co2 Meter For Indoors Instruction Manual

3-in-1 CO2 Meter for Indoors

Air Quality Monitor Instruction Manual

Product Specifications

This product is an air quality monitor that detects Carbon
dioxide (CO2), Temperature, and Humidity. It combines sensors for
real-time monitoring of Carbon dioxide (CO2), temperature, and
humidity on its display.

• Test variables: Carbon dioxide (CO2), temperature,
  humidity
• CO2 technical indicators:
  • Measuring range: 400-5000PPM
  • Resolution: 1 PPM
  • Sensor for CO2: Infrared (NDIR)
  • CO2 range:
    • 400~1000 ppm – Green indicator light (Good air quality)
    • 1001~2000 ppm – Yellow indicator light (Normal air
      quality)
    • 2001~5000 ppm – Red indicator light (Poor air quality)
• Humidity range: 20%-85% RH
• Large 1600mAh capacity Lithium battery
• 5V Micro USB charging
• Low battery warning

Considerations

Please read the instructions carefully before using this device.
Please let the device work for a few minutes outdoors before use
for the most accurate results. Please keep the manual handy for
quick reference and troubleshooting.

Precautions

• Avoid covering the air intake areas during use to avoid
  inaccurate measurements.
• Avoid the use of solvents to clean the product as residual
  fumes will skew air quality readings.
• Avoid water or other liquids near the product to avoid
  electrical damage.
• Do not allow unauthorized modification or repair of this
  product.

Instructions

1. Start Up:
   • Press power button to turn device on.
   • Long-press power button to turn device off.
   • In the boot state, single-click power button to recycle switch
     the brightness of the screen (with 6 levels for brightness).
2. About Charging:
   • When low battery icon is displayed, the device needs to be
     charged.
   • Insert the included or another compatible micro USB charging
     cable into the device.
   • Attach the other end to a USB DC charger (such as a smartphone
     charger) that outputs DC 5V at >=1000mA.
   • Fully charge for at least 2-3 hours before use.
   • Avoid charging with a USB computer port which only outputs
     500mA.

Product List

• Air Quality monitor x 1
• Micro USB charging cable x 1
• Product Manual x 1

Air Quality Monitor Instruction Manual

Product Specifications
Display method: Common Screen display Atmospheric pressure: 86Kpa – 106Kpa Detection method for CO2 : Infrared (NDIR) Sampling time: 1.5 seconds Product Size:70*80*35mm Detection temperature: -10°C to 50°C; Relative humidity: 20% – 85% Storage temperature: -10°C to 60°C; Concentration unit for CO2:PPM Power source: Lithium battery with 1600mAh capacity; 5V DC power charging via micro USB port Product weight: 150g
Product Description
This product is an air quality monitor that detects Carbon dioxide (CO2),Temperature, and Humidity. it combines sensors real-time monitoring of Carbon dioxide (CO2), temperature, and humidity on its display.
2

Considerations
Please read the instructions carefully before using this device. Please let the device work short mins outdoors before use for most accurate results . Please keep the manual handy for quick reference and troubleshooting.
Precautions
Avoid covering the air intake areas during use to avoid inaccurate measurements. Avoid use of solvents to clean the product as residual fumes will skew air quality readings. Avoid water or other liquids near the product to avoid electrical damage. Do not allow unauthorized modification or repair of this product.
Features:
– Common Screen display -Test variables:Carbon dioxide (CO2),temperature, humidity -Large 1600mAh capacity Lithium battery -5V Micro USB charging -Low battery warning
3

Instructions
1. Start Up Press power button to turn device on, and Long-press power button to turn device off. In the boot stateSingle-click power button to recycle switch the brightness of screen(with 6 levels for brightness)
1. Power Button
2. Air Vents 3.USB charging port
4

2. About Charging
When low battery icon is displayed, the device needs to be charged. Insert the included or another compatible micro USB charging cable into the device. Attach the other end to a USB DC charger (such as a smart phone charger) that outputs DC 5V at >=1000mA. Fully charge for at least 2-3 hours before use. Avoid charging with a USB computer port which only outputs 500mA.

3.Parameters :
CO2 technical indicators Measuring range: 400-5000PPM Resolution: 1 PPM

Sensor for CO2 : Infrared ( NDIR)

CO2 range 400~1000 ppm 1001~2000 ppm 2001~5000 ppm

Indicator light Green Yellow Red

Air quality Good
Normal Poor

Temperature and humidity technical indicators

Measuring range: -10-50 ° C

Measurement accuracy: ±1 °C

Humidity range: 20%-85% RH

Measurement accuracy: ±4% RH

Product List

Air Quality monitor

x 1

Micro USB charging cable

x 1

Product Manual

x 1

5