BRC-12CR Side Mount Belt Rack
Product Information
Product Name: Belt Rack 12
Product Dimensions:
- Width: 2.28 inches
- Depth: 11.99 inches
- Height: 2.32 inches
Product Weight: N/A
Container Capacity: Holds 7 belts
Slide Type: Ball Bearing Slide
Slide Closing: Normal
Slide Mounting: Side
Slide Specifications:
- Slide Extension: Full 300 mm
- Max Weight Rating: 100 lb
- Slide Length: 300 mm
- Slide Finish: N/A
Product Usage Instructions
- If you want to mount the belt rack on the right wall, follow
the instructions as shown. - If you want to mount the belt rack on the left wall, follow
these steps:- Remove the acorn nuts.
- Rotate the front plate by 180 degrees.
- Re-install the acorn nuts.
- The product has a width of 2.28 inches, a depth of 11.99
inches, and a height of 2.32 inches. - The belt rack can hold up to 7 belts.
- The slide type is a ball bearing slide with normal
closing. - The slide should be mounted on the side of the cabinet.
- The slide has a full extension of 300 mm and a maximum weight
rating of 100 lb.
NOTE: SHOWN FOR RIGHT WALL MOUNT. FOR LEFT WALL MOUNT: REMOVE ACORN NUTS, ROTATE FRONT PLATE 180
AND RE-INSTALL ACORN NUTS.
.00 [0] 1.28 [32,5] 2.19 [55,5] 2.50 [63,5] 7.58 [192,5] 8.65 [219,7] 10.10 [256,5]
1.80 2.32 [45,8] [58,9]
11.99 [304,5 ] 1.50 [38,1] TYP
This drawing is the property of Rev-A-Shelf (RAS) and is disclosed in confidence to the extent its subject matter is original to RAS. Any vendor receiving this drawing from RAS shall hold and use this drawing for the sole benefit of RAS and shall not disclose it to, or use or reproduce it for any third party, or perform any act adverse to the interest of RAS with respect to this drawing without the express written permission of RAS. Vendors shall not revise any physical, dimensional or performance characteristic unless authorized by Rev-A-Shelf Engineering.
1.58 [40,2]
2.28 [57,8]
1.00 [25,4]
TYP.
23.80 [604,5 ]
.52 [13,3] TYP.
3X .25 [6,3]
.20 [5,1] .77 [19,6]
3X .25 [6,3] .46 [11,7]
OPEN VIEW
B 4-3-12 KRR ECN12-020
A 9/22/11 BKT ECN11-058
REV. DATE
BY
DESCRIPTION OF CHANGE
CUSTOMER DRAWING
AMERICAN
BY DATE
PROJECTION
INCH [MM]
DRAWN BKT 7/14/2011 SIZE
B
BELT RACK 12″
TOLERANCES MAT. DEC. (WOOD) .XX .03 [.8mm] (OTHER) .XX .02 [.5mm] (ALL) .XXX .005 [.13 mm] FRACTIONS 1/32 [.8 mm]
ANGLES 1/2
MATERIAL FINISH
DRAWING NO.
SCALE
BRC-12CR_CUST 0.143
PART NO.
SHEET OF
BRC-12CR 1 2
This drawing is the property of Rev-A-Shelf (RAS) and is disclosed in confidence to the extent its subject matter is original to RAS. Any vendor receiving this drawing from RAS shall hold and use this drawing for the sole benefit of RAS and shall not disclose it to, or use or reproduce it for any third party, or perform any act adverse to the interest of RAS with respect to this drawing without the express written permission of RAS. Vendors shall not revise any physical, dimensional or performance characteristic unless authorized by Rev-A-Shelf Engineering.
NOTE: HOLDS 7 BELTS
PART DIMENSIONS
MIN
MAX
WIDTH
2.28
DEPTH
11.99
HEIGHT
2.32
WEIGHT
DIAMETER
RADIUS
CONTAINTER CAPACITY
CONTAINER UOM
MIN CABINET OPENING
WIDTH
2.50
DEPTH
12.00
HEIGHT
N/A
PRODUCT MAX WEIGHT RATING
SLIDE TYPE SLIDE CLOSING SLIDE MOUNTING
SLIDE SPECIFICATIONS
BALL BEARING SLIDE EXTENSION
NORMAL
SLIDE LENGTH
SIDE
SLIDE FINISH
FULL 300 MM
MAX WEIGHT RATING
100 LB
B 4-3-12 KRR ECN12-020
A 9/22/11 BKT ECN11-058
REV. DATE
BY
DESCRIPTION OF CHANGE
CUSTOMER DRAWING
AMERICAN
BY DATE
PROJECTION
INCH [MM]
DRAWN BKT 7/14/2011 SIZE
B
BELT RACK 12″
TOLERANCES MAT. DEC. (WOOD) .XX .03 [.8mm] (OTHER) .XX .02 [.5mm] (ALL) .XXX .005 [.13 mm] FRACTIONS 1/32 [.8 mm]
ANGLES 1/2
MATERIAL FINISH
DRAWING NO.
SCALE
BRC-12CR_CUST 0.500
PART NO.
SHEET OF
BRC-12CR 2 2
