BRC-14CR_CUST Side Mount Belt Rack
Product Information:
The product is a belt rack with the model number BRC-14CR. It is
designed to be wall-mounted and can hold up to 9 ties. The
dimensions of the rack are as follows:
- Width: 2.28 inches
- Depth: 13.96 inches
- Height: 2.32 inches
- Weight: Maximum 27.96 pounds
The rack is made of wood and has a maximum weight rating of 100
pounds. It features a ball bearing slide with a slide length of
350mm. The slide has a normal closing and is mounted on the side of
the rack. The slide has a maximum weight rating of 100 pounds.
Product Usage Instructions:
- If you plan to mount the rack on the right wall, follow the
instructions as shown in the user manual. - If you plan to mount the rack on the left wall, remove the
acorn nuts, rotate the front plate 180 degrees, and then re-install
the acorn nuts. - Ensure that the minimum cabinet opening width is at least 2.50
inches and the minimum cabinet opening depth is at least 13.96
inches. - The rack can hold up to 9 ties. Place your ties onto the rack
for easy storage and organization. - Make sure not to exceed the maximum weight rating of 100 pounds
for the rack.
NOTE: SHOWN FOR RIGHT WALL MOUNT. FOR LEFT WALL MOUNT: REMOVE ACORN NUTS, ROTATE FRONT PLATE 180
AND RE-INSTALL ACORN NUTS.
13.96 [354,5 ] 1.50 [38,1] TYP.
1.07 [27,1]
2.28 [57,8]
1.81 [46] 2.32 [58,9]
27.96 [710,1 ]
.50 [12,8] 1.00 [25,4]
.00 [0] 1.46 [37] 2.36 [60] 2.68 [68] 10.81 [274,6]
3X .25 [6,3]
.78 [19,7]
3X .25 [6,3]
.20 [5,2]
.46 [11,7]
10.12 [257] 12.41 [315,1]
This drawing is the property of Rev-A-Shelf (RAS) and is disclosed in confidence to the extent its subject matter is original to RAS. Any vendor receiving this drawing from RAS shall hold and use this drawing for the sole benefit of RAS and shall not disclose it to, or use or reproduce it for any third party, or perform any act adverse to the interest of RAS with respect to this drawing without the express written permission of RAS. Vendors shall not revise any physical, dimensional or performance characteristic unless authorized by Rev-A-Shelf Engineering.
OPEN VIEW
A 9-20-11 KRR ECN11-058
REV. DATE
BY
DESCRIPTION OF CHANGE
CUSTOMER DRAWING
AMERICAN
BY DATE
PROJECTION
INCH [MM]
DRAWN KRR 11-24-10 SIZE
B
14″ BELT RACK
TOLERANCES MAT. DEC. (WOOD) .XX .03 [.8mm] (OTHER) .XX .02 [.5mm] (ALL) .XXX .005 [.13 mm] FRACTIONS 1/32 [.8 mm]
ANGLES 1/2
MATERIAL FINISH
DRAWING NO.
SCALE
BRC-14CR_CUST 0.375
PART NO.
SHEET OF
BRC-14CR 1 2
This drawing is the property of Rev-A-Shelf (RAS) and is disclosed in confidence to the extent its subject matter is original to RAS. Any vendor receiving this drawing from RAS shall hold and use this drawing for the sole benefit of RAS and shall not disclose it to, or use or reproduce it for any third party, or perform any act adverse to the interest of RAS with respect to this drawing without the express written permission of RAS. Vendors shall not revise any physical, dimensional or performance characteristic unless authorized by Rev-A-Shelf Engineering.
NOTE: HOLDS 9 TIES
PART DIMENSIONS
MIN
WIDTH
2.28
DEPTH
13.96
HEIGHT
2.32
WEIGHT
DIAMETER
RADIUS
CONTAINTER CAPACITY
CONTAINER UOM
MAX 27.96
MIN CABINET OPENING
WIDTH
2.50
DEPTH
13.96
HEIGHT
N/A
PRODUCT MAX WEIGHT RATING
SLIDE TYPE SLIDE CLOSING SLIDE MOUNTING
SLIDE SPECIFICATIONS
BALL BEARING SLIDE EXTENSION 1/4″ O.T.
NORMAL
SLIDE LENGTH
350 MM
SIDE
SLIDE FINISH
MAX WEIGHT RATING
100 LB
A 9-20-11 KRR ECN11-058
REV. DATE
BY
DESCRIPTION OF CHANGE
CUSTOMER DRAWING
AMERICAN
BY DATE
PROJECTION
INCH [MM]
DRAWN KRR 11-24-10 SIZE
B
14″ BELT RACK
TOLERANCES MAT. DEC. (WOOD) .XX .03 [.8mm] (OTHER) .XX .02 [.5mm] (ALL) .XXX .005 [.13 mm] FRACTIONS 1/32 [.8 mm]
ANGLES 1/2
MATERIAL FINISH
DRAWING NO.
SCALE
BRC-14CR_CUST 0.500
PART NO.
SHEET OF
BRC-14CR 2 2
