MAG Series LCD Smart Monitor
Product Information: MAG Series LCD Monitor
The MAG Series LCD Monitor comes in two models – MAG 275CQRF-QD
(3CD2) and MAG 325CQRF-QD (3DC6). It is a high-performance monitor
designed to provide maximum viewing comfort with its adjustment
capabilities. The monitor package includes the monitor, quick start
guide, stand with screws, stand base with screws, wall mount
bracket screws, power cord, external power supply, DisplayPort
cable (optional), premium high-speed HDMI cable (optional), and USB
upstream cable (optional). The monitor supports DisplayPort 1.2a
and HDMI 2.0b connectivity options. It also features a USB Type-C
port that supports DisplayPort Alternate Mode and up to 5V/3A (15W)
power delivery.
Product Usage Instructions:
Hardware Setup Procedures
While connecting devices, be careful in holding the devices and
use a grounded wrist strap to avoid static electricity.
Package Contents
- Monitor (MAG 275CQRF-QD or MAG 325CQRF-QD)
- Quick Start Guide
- Stand with Screw(s)
- Stand Base with Screw(s)
- Wall Mount Bracket Screws
- Power Cord
- External Power Supply
- DisplayPort Cable (Optional)
- Premium High Speed HDMI Cable (Optional)
- USB Upstream Cable (Optional) (for USB Type-B Upstream
Port)
Contact your place of purchase or local distributor if any of
the items is damaged or missing. Package contents may vary by
country. The included power cord is exclusively for this monitor
and should not be used with other products.
Installing the Monitor Stand
- Leave the monitor in its protective foam packaging. Align the
stand bracket to the monitor groove. - Tighten the stand bracket with screws.
- Connect the base to the stand and tighten the base screw to
secure the base. - Make sure the stand assembly is properly installed before
setting the monitor upright.
Place the monitor on a soft, protected surface to avoid
scratching the display panel. Do not use any sharp objects on the
panel. The groove for installing the stand bracket can also be used
for wall mount. Please contact your dealer for proper wall mount
kit. This product comes with NO protective film to be removed by
the user! Any mechanical damages to the product including removal
of the polarizing film may affect the warranty!
Adjusting the Monitor
Avoid touching the display panel when adjusting the monitor.
Monitor Overview
The monitor overview includes various components such as:
- Power LED – Lit in white after the monitor is turned on. If no
signal input, the LED will turn into orange. Lit in orange when the
monitor is in Stand-by mode. - Macro Key – To activate OSD Application.
- Navi Key
- Power Button
- Cable Routing Hole
- Kensington Lock
- Power Jack
- DisplayPort – Supports 2560×1440@170Hz as specified in
DisplayPort 1.2a. - HDMITM Connector – Supports HDMITM CEC, 2560×1440@144Hz as
specified in HDMITM 2.0b. - HDMITM Connector – Supports 2560×1440@144Hz as specified in
HDMITM 2.0b. - USB Type-C Port – This port supports DisplayPort Alternate (DP
Alt) Mode and up to 5V/3A (15W) power delivery. Your USB-C signal
source and cable must support DisplayPort Alternate Mode to enable
video output to the monitor.
MAG Series
LCD Monitor
MAG 275CQRF-QD (3CD2) MAG 325CQRF-QD (3DC6)
User Guide
Contents
Getting Started……………………………………………………………………………………………….. 3 Package Contents……………………………………………………………………………………… 3 Installing the Monitor Stand……………………………………………………………………….. 4 Adjusting the Monitor ………………………………………………………………………………… 5 Monitor Overview………………………………………………………………………………………. 7 Connecting the Monitor to PC …………………………………………………………………… 10
OSD Setup ……………………………………………………………………………………………………. 11 Navi Key …………………………………………………………………………………………………. 11 Hot Key…………………………………………………………………………………………………… 11
OSD Menus…………………………………………………………………………………………………… 12 Gaming…………………………………………………………………………………………………… 12 Professional……………………………………………………………………………………………. 15 Image …………………………………………………………………………………………………….. 16 Input Source …………………………………………………………………………………………… 16 Navi Key …………………………………………………………………………………………………. 17 Setting……………………………………………………………………………………………………. 17
Specifications……………………………………………………………………………………………….. 19 Preset Display Modes …………………………………………………………………………………… 21 Troubleshooting……………………………………………………………………………………………. 23 Safety Instructions………………………………………………………………………………………… 24 TÜV Rheinland Certification…………………………………………………………………………… 26 Regulatory Notices……………………………………………………………………………………….. 27
Revision V1.1, 2023/06
2 Contents
Getting Started
This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity.
Package Contents
Monitor
MAG 275CQRF-QD MAG 325CQRF-QD
Documentation Quick Start Guide
Stand with Screw(s)
Stand Base with Screw(s)
Accessories
Screw(s) for Wall Mount Bracket(s)
Power Cord
External Power Supply
DisplayPort Cable (Optional)
Cables
Premium High Speed HDMITM Cable (Optional)
USB Upstream Cable (Optional) (for USB Type-B Upstream Port)
Important
Contact your place of purchase or local distributor if any of the items is damaged or missing.
Package contents may vary by country.
The included power cord is exclusively for this monitor and should not be used with other products.
Getting Started 3
Installing the Monitor Stand
1. Leave the monitor in its protective foam packaging. Align the stand bracket to the monitor groove.
2. Tighten the stand bracket with screws. 3. Connect the base to the stand and tighten the base screw to secure the base. 4. Make sure the stand assembly is properly installed before setting the monitor
upright.
2
3 1
Important
Place the monitor on a soft, protected surface to avoid scratching the display panel. Do not use any sharp objects on the panel. The groove for installing the stand bracket can also be used for wall mount. Please
contact your dealer for proper wall mount kit. This product comes with NO protective film to be removed by the user! Any
mechanical damages to the product including removal of the polarizing film may affect the warranty!
4 Getting Started
Adjusting the Monitor
This monitor is designed to maximize your viewing comfort with its adjustment capabilities.
Important
Avoid touching the display panel when adjusting the monitor.
MAG 275CQRF-QD
-5°
20°
130 mm
Getting Started 5
MAG 325CQRF-QD
-5°
20°
100 mm
6 Getting Started
Monitor Overview
1
2
3
6 5
4
78
9
10 11 12 13
14 Getting Started 7
1 Power LED
Lit in white after the monitor is turned on. If no signal input, the LED will turn into orange. Lit in orange when the monitor is in Stand-by mode.
2 Macro Key
To activate OSD Application.
3 Navi Key 4 Power Button 5 Cable Routing Hole 6 Kensington Lock 7 Power Jack 8 DisplayPort
Supports 2560×1440@170Hz as specified in DisplayPort 1.2a.
9 HDMITM Connector
Supports HDMITM CEC, 2560×1440@144Hz as specified in HDMITM 2.0b.
10 HDMITM Connector
Supports 2560×1440@144Hz as specified in HDMITM 2.0b.
11 USB Type-C Port
This port supports DisplayPort Alternate (DP Alt) Mode and up to 5V/3A (15W) power delivery.
Important
Your USB-C signal source and cable must support DisplayPort Alternate Mode to enable video output to the monitor.
12 Headphone Jack
8 Getting Started
13 USB 2.0 Type-B Upstream Port
For USB Upstream Cable.
Important
To Monitor
Check the package for USB Upstream Cable and connect it to the PC and monitor. Once this cable is connected, the USB Type-A Downstream Ports on the monitor will be ready for use.
To PC
14 USB 2.0 Type-A Port
Getting Started 9
Connecting the Monitor to PC
1. Turn off your computer. 2. Connect the video cable from the monitor to your computer. 3. Assemble the external power supply & power cord. (Figure A) 4. Connect the external power supply to the monitor power jack. (Figure B) 5. Plug the power cord into the electrical outlet. (Figure C) 6. Turn on the monitor. (Figure D) 7. Power on the computer and the monitor will auto detect the signal source.
B D
C A
10 Getting Started
OSD Setup
This chapter provides you with essential information on OSD Setup.
Important
All information is subject to change without prior notice.
Navi Key
The monitor comes with a Navi Key, a multi-directional control that helps navigate the On-Screen Display (OSD) menu.
Up/ Down/ Left/ Right: selecting function menus and items adjusting function values entering into/exiting from function menus Press (OK): launching the On-Screen Display (OSD) entering submenus confirming a selection or setting
Hot Key
Users may enter into preset function menus by moving the Navi Key up, down, left or right when the OSD menu is inactive.
Users may customize their own Hot Keys to enter into different function menus.
OSD Setup 11
OSD Menus
Important
The following settings will be grayed out when HDR signals are received:
Night Vision MPRT Low Blue Light HDCR
Brightness Contrast Color Temperature
Gaming
1st Level Menu 2nd/3rd Level Menu
Game Mode
Premium Color
User
FPS
Racing
RTS
RPG
Description
Use Up or Down Button to select and preview mode effects.
Press the OK Button to confirm and apply your mode type.
12 OSD Menus
1st Level Menu 2nd/3rd Level Menu
Night Vision
OFF
Normal
Strong
Strongest
A.I.
Response Time Normal
Fast
Fastest
Description This function optimizes background
brightness and is recommended for FPS games.
Setting to Fastest will reach the shortest response time and help improve blurred images when playing very fast games.
MPRT
OFF
ON
Activating MPRT will affect:
Affected Function » Brightness » Response Time » HDCR » Adaptive-Sync
Function Status Unable to select Set to OFF
MPRT is available when the refresh rate is over 85 Hz.
Refresh Rate
Location
Left Top
Right Top
Left Bottom
Right Bottom
Location is adjustable in OSD Menu. Press the OK Button to confirm and apply your Refresh Rate Location.
This monitor follows and works at the Operating System’s preset Screen Refresh Rate.
Customize
OFF
ON
OSD Menus 13
1st Level Menu 2nd/3rd Level Menu Description
Alarm Clock
Location
Left Top
Right Top
Left Bottom
Right Bottom
After setting the time, press the OK Button to activate the timer.
Users have to manually restore their preset Alarm Clock after any AC power loss and reconnection.
Customize
OFF
15:00 30:00
00:01 ~ 99:59
45:00
60:00
KVM
Auto Upstream Type C
Smart Crosshair
Icon
None
Auto allows the monitor to automatically switch between USB input sources, such as keyboards, mice or other USB devices.
Users can also designate Upstream port or USB Type-C as the only USB signal source.
Through AI algorithm, this function enhances the visibility of in-game crosshair.
Users can select the color and position of the crosshair.
Adaptive-Sync
Color
Position Reset OFF ON
White Red Auto
Adaptive-Sync prevents screen tearing.
Activating Adaptive-Sync will affect:
Affected Function » MPRT
Function Status Set to OFF
14 OSD Menus
Professional
1st Level Menu Pro Mode
Low Blue Light HDCR MPRT
2nd Level Menu Eco User Anti-Blue Movie Office sRGB Adobe RGB Display P3
Description
Use Up or Down Button to select and preview mode effects.
Press the OK Button to confirm and apply your mode type.
OFF
Low Blue Light protects your eyes against
ON
blue light. When enabled, Low Blue Light adjusts the screen color temperature to a
more yellow glow.
When Pro Mode is set to Anti-Blue, it is mandatory to enable Low Blue Light.
OFF
HDCR enhances image quality by
ON
increasing the contrast of images.
Activating HDCR will affect:
Affected Function » Brightness » MPRT
Function Status Unable to select Set to OFF
OFF ON
Activating MPRT will affect:
Affected Function » Brightness » Response Time » HDCR » Adaptive-Sync
Function Status Unable to select Set to OFF
Image Enhancement
OFF Weak Medium Strong Strongest
MPRT is available when the refresh rate is over 85 Hz.
Image Enhancement enhances image edges to improve their acutance.
OSD Menus 15
Image
1st Level Menu 2nd/3rd Level Menu
Description
Brightness
0-100
Properly adjust Brightness according to the surrounding lighting.
Contrast
0-100
Properly adjust Contrast to relax your eyes.
Sharpness
0-5
Sharpness improves clarity and details of images.
Color Temperature
Cool Normal Warm Customization R (0-100)
G (0-100) B (0-100)
Use Up or Down Button to select and preview mode effects.
Press the OK Button to confirm and apply your mode type.
Users can adjust Color Temperature in Customization mode.
Screen Size
Auto 4:3 16:9 16:10
Users can adjust Screen Size in any mode, any resolution and any screen refresh rate.
Activating Screen Size 16:10 will affect:
Affected Function Function Status
» DP Overclocking Unable to select
Input Source
1st Level Menu HDMITM1 HDMITM2 DP Type C Auto Scan
2nd Level Menu Description Users can adjust Input Source in any mode.
OFF
Users can use the Navi Key to select Input
ON
Source at below status:
· While “Auto Scan” is set to “OFF” with
the monitor at power saving mode;
· While “No Signal” message box is shown on the monitor.
16 OSD Menus
Navi Key
1st Level Menu
Up Down Left Right
2nd Level Menu Description
OFF Brightness
All Navi Key items can be adjusted via OSD Menus.
Game Mode
Smart Crosshair
Alarm Clock
Input Source Refresh Rate Info. On Screen Night Vision KVM
Setting
1st Level Menu Language
Transparency
2nd Level Menu Description
English Français Deutsch Italiano
Users have to press the OK Button to confirm and apply the Language setting.
Language is an independent setting. Users’ own language setting will override the factory. When users set Reset to Yes, Language will not be changed.
Español
Português
Bahasa Indonesia
Türkçe
(More languages coming soon)
0~5
Users can adjust Transparency in any
mode.
OSD Menus 17
1st Level Menu OSD Time Out
RGB LED
2nd Level Menu 5~30s
OFF ON
Description
Users can adjust OSD Time Out in any mode.
Users can adjust RGB LED to ON or OFF.
Power Button
OFF Standby
Info. On Screen OFF ON
When set to OFF, users can press the power button to turn off the monitor.
When set to Standby, users can press the power button to turn off the panel and backlight.
The information of the monitor status will be shown on the right side of the screen.
DP OverClocking OFF ON
To overclock the monitor refresh rate, users have to set DP OverClocking to ON.
HDMITM CEC
OFF
ON
Type C PD
OFF
Charge
ON
Reset
YES
NO
HDMITM CEC (Consumer Electronics Control) supports Sony PlayStation®, Nintendo® SwitchTM, Xbox Series X|S consoles and various audio-visual devices that are CEC-capable.
If HDMITM CEC is set to ON:
· The monitor will automatically power on when the CEC device is turned on.
· The CEC device will enter power saving mode when the monitor is turned off.
· When Sony PlayStation®, Nintendo® SwitchTM, or Xbox Series X|S console is connected, Game Mode and Pro Mode will be automatically set to default modes and can be adjusted to users’ preferred modes later.
Type C PD Charge enables users to charge their devices through a USB Type-C connector, which can deliver up to 15W (5V/3A).
Users can Reset and restore settings to original OSD Default in any mode.
18 OSD Menus
Specifications
Monitor Size Curvature Panel Type Resolution Aspect Ratio Brightness
USB Type-C Power Delivery
Contrast Ratio Refresh Rate Response Time
I/O
View Angles DCI-P3*/ sRGB Surface Treatment Display Colors Monitor Power Options External Power Supply Power Input Power Output
MAG 275CQRF-QD 27 inch
MAG 325CQRF-QD 31.5 inch
1000R
Rapid VA 2560 x 1440
16:9
300 nits (typ.)
Brightness 0~75%: 5V/3A
Brightness 76~100%: 5V/2A
HDR & HDCR: 5V/2A
5V/3A
4000:1
3500:1
170Hz (Default 165Hz)
1ms (GTG) 1ms (MPRT)
HDMITM Connector x2 DisplayPort x1 USB Type-C Port x1 USB 2.0 Type-A Port x2 USB 2.0 Type-B Upstream Port x1 Headphone Jack x1
178°(H) , 178°(V) 96% / 127% Anti-glare 1.07B (8 bit + FRC)
96.8% / 128.5%
20V 3.25A
Model: ADPC2065
100~240Vac, 50~60Hz, 1.5A
20V 4.5A
Model: ADPC2090
100~240Vac, 50~60Hz, 1.3A
20V 3.25A
20V 4.5A
Specifications 19
Monitor
MAG 275CQRF-QD
MAG 325CQRF-QD
Adjustment (Height)
0 ~ 130mm
0 ~ 100mm
Adjustment (Tilt)
-5° ~ 20°
Kensington Lock
Yes
VESA Mounting
Plate Type: 100 x 100 mm Screw Type: M4 x 10 mm
· Thread Diameter: 4 mm · Thread Pitch: 0.7 mm · Thread Length: 10 mm
Dimension (W x H x D)
607 x 427 x 267 mm
701 x 480 x 270 mm
Weight
Net Gross
6.2 kg 9.3 kg
7.7 kg 10.3 kg
Environment
Operating
Temperature: 0 to 40 Humidity: 20% to 90%, non-condensing Altitude: 0 ~ 5000m
Storage
Temperature: -20 to 60 Humidity: 10% to 90%, non-condensing
* Based on CIE1976 test standards.
20 Specifications
Preset Display Modes
Important
All information is subject to change without prior notice.
Standard VGA
SVGA
XGA
SXGA WXGA+ WSXGA+ Full HD QHD
Resolution
640×480
800×600
1024×768
1280×1024 1440×900 1680×1050 1920×1080 2560×1440
@60Hz @67Hz @72Hz @75Hz @56Hz @60Hz @72Hz @75Hz @60Hz @70Hz @75Hz @60Hz @75Hz @60Hz @60Hz @60Hz @120Hz @60Hz @120Hz @144Hz @165Hz @170Hz
Standard Mode
HDMITM
DP
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V *
USB-C V V V V V V V V V V V V V V V V V V V V V V *
Preset Display Modes 21
Standard
Resolution
Video Timing Resolution
480P 576P 720P 1080P @60Hz 1080P @120Hz 2160P @30Hz 2160P @50Hz 2160P @60Hz
Standard Mode
HDMITM
DP
V
V
V
V
V
V
V
V
V
V
V
V
V
USB-C V V V V V
Standard QHD
Resolution
2560×1600
@60Hz @120Hz @144Hz
Screen Size 16:10 without HDR
HDMITM
DP
USB-C
V
V
V
V
V
V
V
V
* Users have to set DP OverClocking to ON. This is the highest refresh rate supported by DP OverClocking. If any monitor error occurs during overclocking, please downscale the refresh rate.
22 Preset Display Modes
Troubleshooting
The power LED is off.
· Press the monitor power button again. · Check if the monitor power cable is properly connected.
No image.
· Check if the computer graphics card is properly installed. · Check if the computer and monitor are connected to electrical outlets and are
turned on. · Check if the monitor signal cable is properly connected. · The computer may be in Standby mode. Press any key to activate the monitor.
The screen image is not properly sized or centered.
· Refer to Preset Display Modes to set the computer to a setting suitable for the monitor to display.
No Plug & Play.
· Check if the monitor power cable is properly connected. · Check if the monitor signal cable is properly connected. · Check if the computer and graphics card are Plug & Play compatible.
The icons, font or screen are fuzzy, blurry or have color problems.
· Avoid using any video extension cables. · Adjust brightness and contrast. · Adjust RGB color or tune color temperature. · Check if the monitor signal cable is properly connected. · Check for bent pins on the signal cable connector.
The monitor starts flickering or shows waves.
· Change the refresh rate to match the capabilities of your monitor. · Update your graphics card drivers. · Keep the monitor away from electrical devices that may cause electromagnetic
interference (EMI).
Troubleshooting 23
Safety Instructions
Read the safety instructions carefully and thoroughly.
All cautions and warnings on the device or User Guide should be noted.
Refer servicing to qualified personnel only.
Power
Make sure that the power voltage is within its safety range and has been adjusted properly to the value of 100~240V before connecting the device to the power outlet.
If the power cord comes with a 3-pin plug, do not disable the protective earth pin from the plug. The device must be connected to an earthed mains socket-outlet.
Please confirm the power distribution system in the installation site shall provide the circuit breaker rated 120/240V, 20A (maximum).
Always disconnect the power cord or switch the wall socket off if the device would be left unused for a certain time to achieve zero energy consumption.
Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord.
If this device comes with an adapter, use only the MSI provided AC adapter approved for use with this device.
Battery
Please take special precautions if this device comes with a battery.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, which can result in an explosion.
Avoid leaving a battery in an extremely high temperature or extremely low air pressure environment that can result in an explosion or the leakage of flammable liquid or gas.
Do not ingest battery. If the coin/button cell battery is swallowed, it can cause severe internal burns and can lead to death. Keep new and used batteries away from children.
European Union:
Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.
BSMI:
For better environmental protection, waste batteries should be collected separately for recycling or special disposal.
24 Safety Instructions
California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit: https://dtsc.ca.gov/perchlorate/
Environment
To reduce the possibility of heat-related injuries or of overheating the device, do not place the device on a soft, unsteady surface or obstruct its air ventilators.
Use this device only on a hard, flat and steady surface. To prevent the device from tipping over, secure the device to a desk, wall or fixed
object with an anti-tip fastener that helps to properly support the device and keep it safe in place. To prevent fire or shock hazard, keep this device away from humidity and high temperature. Do not leave the device in an unconditioned environment with a storage temperature above 60 or below -20, which may damage the device. The maximum operating temperature is around 40. When cleaning the device, be sure to remove the power plug. Use a piece of soft cloth rather than industrial chemical to clean the device. Never pour any liquid into the opening; that could damage the device or cause electric shock. Always keep strong magnetic or electrical objects away from the device. If any of the following situations arises, get the device checked by service personnel: · The power cord or plug is damaged. · Liquid has penetrated into the device. · The device has been exposed to moisture. · The device does not work well or you can not get it working according to the User
Guide. · The device has dropped and damaged. · The device has obvious sign of breakage.
Safety Instructions 25
TÜV Rheinland Certification
TÜV Rheinland Low Blue Light Certification
Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue Light certification to ensure users’ eye comfort and well-being. Please follow the instructions below to reduce the symptoms from extended exposure to the screen and blue light. Place the screen 20 28 inches (50 70 cm) away from your eyes and a little below
eye level. Consciously blinking the eyes every now and then will help to reduce eye strain after
extended screen time. Take breaks for 20 minutes every 2 hours. Look away from the screen and gaze at a distant object for at least 20 seconds
during breaks. Make stretches to relieve body fatigue or pain during breaks. Turn on the optional Low Blue Light function.
TÜV Rheinland Flicker Free Certification
TÜV Rheinland has tested this product to ascertain whether the display produces visible and invisible flicker for the human eye and therefore strains the eyes of users.
TÜV Rheinland has defined a catalogue of tests, which sets out minimum standards at various frequency ranges. The test catalogue is based on internationally applicable standards or standards common within the industry and exceeds these requirements.
The product has been tested in the laboratory according to these criteria. The keyword “Flicker Free” confirms that the device has no visible and invisible
flicker defined in this standard within the range of 0 – 3000 Hz under various brightness settings. The display will not support Flicker Free when Anti Motion Blur/MPRT is enabled. (The availability of Anti Motion Blur/MPRT varies by products.)
26 TÜV Rheinland Certification
Regulatory Notices
CE Conformity
This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/EU). This product has been tested and found to comply with the harmonized standards for Information Technology Equipment published under Directives of Official Journal of the European Union.
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
Notice 1
The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
MSI Computer Corp.
901 Canada Court, City of Industry, CA 91748, USA
(626) 913-0828
www.msi.com
Regulatory Notices 27
WEEE Statement
Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2012/19/EU, products of “electrical and electronic equipment” cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life.
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at: https://csr.msi.com/global/index
RoHS Statement
Japan JIS C 0950 Material Declaration
A Japanese regulatory requirement, defined by specification JIS C 0950, mandates that manufacturers provide material declarations for certain categories of electronic products offered for sale after July 1, 2006. https://csr.msi.com/global/Japan-JIS-C-0950-Material-Declarations
India RoHS
This product complies with the “India E-waste (Management and Handling) Rule 2016” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Turkey EEE Regulation
Conforms to the EEE Regulations of the Republic Of Turkey
Ukraine Restriction of Hazardous Substances
The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of 10 March 2017, 139, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment.
Vietnam RoHS
As from December 1, 2012, all products manufactured by MSI comply with Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products.
28 Regulatory Notices
Green Product Features
Reduced energy consumption during use and stand-by Limited use of substances harmful to the environment and health Easily dismantled and recycled Reduced use of natural resources by encouraging recycling Extended product lifetime through easy upgrades Reduced solid waste production through take-back policy
Environmental Policy
The product has been designed to enable proper reuse of parts and recycling and should not be thrown away at its end of life.
Users should contact the local authorized point of collection for recycling and disposing of their end-of-life products.
Visit the MSI website and locate a nearby distributor for further recycling information.
Users may also reach us at [email protected] for information regarding proper disposal, take-back, recycling, and disassembly of MSI products.
Warning!
Overuse of screens is likely to affect eyesight.
Recommendations:
1. Take a 10-minute break for every 30 minutes of screen time. 2. Children under 2 years of age should have no screen time. For children aged 2
years and over, screen time should be limited to less than one hour per day.
Copyright and Trademarks Notice
Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. MSI reserves the right to make changes to this document without prior notice.
The terms HDMITM, HDMITM High-Definition Multimedia Interface, HDMITM Trade dress and the HDMITM Logos are trademarks or registered trademarks of HDMITM Licensing Administrator, Inc.
Technical Support
If a problem arises with your product and no solution can be obtained from the user’s manual, please contact your place of purchase or local distributor. Alternatively, please visit https://www.msi.com/support/ for further guidance.
Regulatory Notices 29
MSI - Redirect
csr
dtsc.ca.gov/perchlorate/
