Nordlux Orbiform 3 Light Island Pendant Instruction Manual

Nordlux Orbiform 3 Light Island Pendant Instruction Manual

nordlux logo

ORBIFORM 3 Light Island Pendant
Instruction Manual

ORBIFORM 3 Light Island Pendant

nordlux ORBIFORM 3 Light Island Pendant

IP20: The lamp should only be installed in areas where direct contact with water cannot occur.
Double insulation Class II: The lamp is double-insulated and does not need to be  I connected to the yellow/green earth wire.

Dustbin IconDisposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances that may cause damage to human health and the environment if not recycled correctly. It is your responsibility to hand it over to a designated collection point for the recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products from straining nature and the environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this product.

nordlux ORBIFORM 3 Light Island Pendant - icon 1 Z-connection: the wire cannot be replaced if damaged, and the lamp must be discarded.
MAX 3x25W Do not exceed the maximum wattage.

nordlux ORBIFORM 3 Light Island Pendant - icon 3 The mounting instruction must not be discarded.

nordlux ORBIFORM 3 Light Island Pendant - icon 1 Z-connection: the wire cannot be replaced if damaged, and the lamp must be discarded.
Warning icon IMPORTANT! Always shut off power to the circuit before starting installation work. In some countries, electrical installation work may only be carried out by an authorized electrical contractor. Contact your local electricity authority for advice.

nordlux ORBIFORM 3 Light Island Pendant - icon 2 General maintenance: Use a soft, dry cloth for dusting, and a soft cloth wrung in lukewarm water (<50°C) with a mild detergent to remove grease stains or similar. Never use detergents containing abrasive or solvent. Only switch on the lamp once all the water has evaporated.
Specifically for mouth-blown glass: Mouth-blown glass is formed manually. Because of this unique process, air bubbles may occur in the glass, just as the thickness of the glass may vary. This is to be seen as a natural consequence of the manual process and is what gives Mouth-blown glass its character and organic look. Always clean mouth-blown glass cold.

nordlux logo

www.nordlux.com
Nordlux NS • Ogre Havnegade 34 DK- 9000 Aalborg
Monteringsanvisning
Montageanleitung
Mounting instruction
Installationsanvisningar
Instructions de montage

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals