030684 North 5 Light Pendant
Product Information
The product is the NORTH 5LT PENDANT, with SKU# 030684 and
039372. It operates at a rated voltage of 220-240V~ and a frequency
of 50Hz. The luminaire is designed for indoor use only and comes
with a warranty.
Installation Requirements
- The mounting point must support 2 times the weight of the
luminaire. - Ensure the luminaire is not installed in the direct line of an
air vent/system. - If installing in a moisture-prone area, ensure proper
ventilation.
Installation Instructions
- Remove all packaging material from the product and place it on
a smooth non-scratch surface. - Detach the mounting bracket (B) from the canopy (G) by
loosening the nuts (I) at the front. - Use the mounting bracket (B) as a template to mark the screw
positions on the ceiling. - Install the mounting bracket (B) onto the ceiling using
appropriate mounting screws (D), washers (C), and anchors (A)
suitable for the mounting surface and environment. - Install the required lengths of suspension rod (O, L, K, J)
onto the body (P) of the luminaire. - Insert plastic grommets (N) into both ends of the threaded rods
(M) and join the suspension rods together (O, L, K, J). Pull the
cord out as you install the suspension rods to remove any
slack. - Install the joiners (H) to the top of the suspension rod and
then install the canopy (G). Ensure proper installation of the star
washer, earth ring, lock washer, and nut. - Connect the mains supply wire to the terminal block (E)
following the color coding: Yellow/Green or – Earth, Blue or N –
Neutral, Brown or L – Live. Ensure secure connections and no
exposed wires. - Reinstall the canopy (G) onto the mounting bracket (B) and
secure it by tightening the nuts (I). - Install globes (R – not included) into the lamp holders (Q),
ensuring not to exceed the maximum wattage rating. - Switch on the luminaire after installation to test and enjoy
your new lighting product.
Safety Tips
– Follow all instructions carefully for correct function and
safety.
– Ensure proper grounding (earthing) during wiring and
installation.
– Check for full continuity in the earth wires.
– Do not exceed the maximum wattage rating for the globes.
Specifications
SKU#: 030684
Installation Instructions
NORTH 5LT PENDANT
SKU# 030684, 039372 Rated Voltage 220-240V~ 50Hz
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation and use of this luminaire. Please keep instructions for future reference.
Warranty
· This luminaire is covered by a 12-month warranty. The warranty is from the date of purchase, not the date of installation.
· If the luminaire is not assembled and installed by a licensed electrician, the warranty will be void. · Please retain the proof of purchase and evidence of installation by a licensed electrician for any warranty enquiries. · Warranty will be void if there is any damage due to improper usage or modification to the luminaire. · Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the
warranty.
Installation Requirements
· This luminaire must be assembled and installed by a licensed electrician. · All wiring and installation of the luminaire must adhere to the latest local and national wiring rules.
E.g. AS/NZS 3000 Electrical Installations. · This luminaire is a Class I product and must be earthed during wiring and installation. · Do not exceed the maximum wattage rating. · Select a suitable location for installation:
– This luminaire is suitable for indoor use only. – The mounting point must support 2 times the weight of the luminaire. – Ensure the luminaire is not installed in the direct line of an air vent/system. – If installing a luminaire in an area prone to moisture, ensure that the area is well ventilated, and an appropriately
rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product fault, and as such is not covered under warranty. · Take care not to pull any electrical wires during unpacking as this may damage the connection. · Lay out all the components on a smooth surface and make sure no components are missing before assembling. · If parts are missing, return the complete product to the place of purchase for inspection or replacement. · Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement. · Ensure power to the circuit you are working on has been switched OFF before commencing any electrical work.
1 |Page
v1.2 (2/2023)
Installation Instructions
Installation Directions
NOTE: Due to the size/weight/wiring of the luminaire, two people will be required to lift it up during the installation process.
1. Remove all packaging material from the product and be careful not to throw away accessories that may be hidden
within the packaging material. If assembly is required, place the luminaire on a smooth non-scratch surface.
2. Remove the mounting bracket (B) from the canopy (G) by loosening the nuts (I) at the front.
3. Use the mounting bracket (B) as a template to mark the screw positions on the ceiling.
4. Install the mounting bracket (B) onto the ceiling by using appropriately sized mounting screws (D), washers (C) and
anchors (A). Ensure the screws (D), washers (C) and anchors (A) used are suitable for the mounting surface and
the surrounding environment.
5. Determine the length of the suspension rod required for your installation location. Install the required lengths of
suspension rod (O, L, K, J) onto the body (P) of the luminaire.
6. Insert the plastic grommets (N) into both ends of the threaded rods (M) and join the suspension rods together (O, L,
K, J).
NOTE: Pull the cord out as you install the suspension rods (O, L, K, J) to remove any slack. Take care, not to
cross-thread or twist and damage the cord.
7. Install the joiners (H) to the top of the suspension rod and install the canopy (G).
NOTE: Ensure that the star washer, earth ring, lock washer and nut are installed in the correct sequence.
8. Connect the mains supply wire to the terminal block (E).
Mains Supply Wire
Luminaire Wire / Terminal block
Earth Yellow/Green
Yellow/Green or
Neutral Blue or Black
Blue or N
Live Brown or Red
Brown or L
NOTE: Ensure the wires are secure, and no bare wires are exposed.
NOTE: This luminaire is a Class I product and must be earthed during wiring and installation.
NOTE: Ensure the earth wires from the mounting bracket (B) and the canopy (G) are connected to the earth
terminal block (E) and there is full continuity.
9. Install the canopy (G) back onto the mounting bracket (B) and secure it by tightening the nuts (I).
10. Install globes (R – not included) into the lamp holders (Q). Do not exceed the maximum wattage rating.
11. After the installation, switch on the luminaire to test and enjoy your new lighting product.
2 |Page
v1.2 (2/2023)
Installation Instructions
3 |Page
v1.2 (2/2023)
Installation Instructions
Safety Tips
· Always ensure the power is OFF and the luminaire has cooled down before performing any maintenance, cleaning, changing the globe or making any adjustment to the luminaire.
· To avoid injury or damage to the luminaire, ensure that power leads and screws are secure before connecting the power.
· Select a suitable location away from liquids and hazards. · To clean, wipe with a soft damp cloth. Do NOT soak or immerse the luminaire in water or other liquids. · Ensure that the luminaire does not come in contact with corrosive chemicals/solvents or abrasive cleaners etc.
Specifications
SKU #
030684
039372
Colour
Textured Black
Textured Chalk
Rated Voltage
220-240V~ 50Hz
Rated Wattage
Max. 225W (5 x 45W Max.)
Lamp Holder
ES / E27
Weight
7.0kg
Canopy Dimensions
H:25mm L:450mm W:70mm
Luminaire Dimensions
H:260mm L:1100mm W:180mm Susp:1800mm
4 |Page
v1.2 (2/2023)
